Games of the Year

Speedrun – Hitman: Absolution – Contracts (The First Hit)

After playing through the first Contract (“The First Hit”) properly, I noticed that the only requirements were to kill the target. It didn’t seem to matter if you got spotted or anything else, so I thought – that would be perfect for a Speedrun!

Level: Hitman (Absolution) – Contracts (The First Hit)
Time: 21 seconds
Score: 95,186
Runs: About 4-5

After a couple runs of seeing what the fastest path might be (leaping over the log takes more time than running around imo), I changed to a smaller resolution and turned the graphics down to low settings to help with speed. I don’t know if this is the fastest possible route, I just found it worked well instinctively after a few runs.

Bandicam seems to have some trouble with H:A, the fps keeps popping through, and seems to lag it out a bit. I even tried disabling SLI. I thought it might be my NVIDIA cards, and in the end, I ended up running it on an AMD/ATi HD 6870 even smoother than dual GTX 560Ti’s (this game prefers AMD videocards).

Good luck with it and See You In The Games!

Mt Trip to Manila, Philippines cont……..

I returned to Colombo on the 19th morning without any delays. On the way I met one of my colleagues at Bangkok airport and that helped pass the time as well as chat on the plane.

I found an interesting article on the web regarding “don’t know that you don’t know” I found the article to be spot on and very helpful in understanding this phenomenon. http://www.doceo.co.uk/tools/knowing.htm Now I can start to develop some strategy to work around this problem so that I am better prepared to face such an issue the next time around.

I finished documenting the results of the workshop in Manila and sent the results for comments from the client. I am still waiting for the results. Hope I am able to finish this assignment this week as it has the potential to get delayed and get ugly.

In terms of my future travel plans there are no assignments where I need to travel overseas at present. The assignments I have lined up are in Colombo. However things can change very quickly.

WORKOUT ANYTIME Featured in Black Enterprise

WORKOUT ANYTIME Featured in Black Enterprise

Zelly Wesson of WORKOUT ANYTIME was recently featured in Black Enterprise. The article discusses Zelly’s opening of his second WORKOUT ANYTIME location. Wesson has been playing professional basketball overseas for the past 15 years, and during his off seasons Wesson has been back managing his WORKOUT ANYTIME locations. Wesson discusses his role in his locations and how he has been successful. 
You can view the full article here. 

And More: In One Sentence™ – “The RX 470 or The RX 480”? [A Very Short Comparison with Sources, Currently Text-Only]

As done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry’…
For this post, I answer the quite-specific Hardware Upgrading question [mainly as it was one that I was asking myself, so I thought I would share my recent findings with others], ‘should you get the AMD Radeon RX 470 GPU or the RX 480’..?

The Short Version

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The Long Version

Again, as done a previous “In One Sentence™” article here at The Blog, I’ve been wanting to make posts once in a while that catered to those without much time, or without much patience, or who [like me] suffer from conditions like ADD/ADHD, or perhaps those who ‘just want a quick answer’… Thus, my beginning to write posts that literally ‘sum up’ concepts, comparisons or reviews “in one sentence”, made especially for those ‘in a hurry'[just like how I spent tons of time on the very creative and original titling of these types of posts..].

Where was I? Oh yes, here then is my summation for a Hardware Purchase Suggestion, a very specific answer for a very specific question in Hardware Upgrading [arrived at after many hours of reading, researching, watching benchmarking videos, all while getting distracted by games, health issues and non-computery-or-techie events in life… but you can skip all of that Life Drama of your own and skip all of the time Researching on your own and just ‘get to the jist’ right here], in one sentence – the answer to the question:

“Should I buy the 470 or the 480?”

The answer, in-one-sentence, is:

“Overall, there is anywhere from a 0-20 frame difference in performance at 1080p between the RX 470 and the RX 480, but with the average difference between the two being about 10 fps at that resolution; so, if that difference is worth the price differential to you (which is anywhere from zero dollars to fifty dollars, depending on where you purchase it from and what model, etc) – then get the 480 – but if that difference is not worth the price to you, stick with the slightly-less-powerful-but-extremely-high-value-for-the-money-right-now RX 470.”

~ The Game Tips And More Blog’s Answer, In One Sentence™

The answer above is based on an average viewpoint of all reviews read and videos watched. Of course, there is always fluctuation in the average amount (sometimes the fps was exactly the same, sometimes it was a quick change in difference [eg. in a video benchmark] by 20fps or slightly more for a short period of time). Also, for some people, money isn’t the issue and they want the higher-shelf RX 480 for the capability it offers. No problem, I’m just presenting what I have seen so far, between the 470 and the 480. If you can “easily” afford the faster product, go for that – but for those who are in the situation where $20 or $40 is a “big step” in price at the moment for them, but they really want to upgrade their aging hardware “now” at the same time – then this summation is for them.

As I always say, if you are looking to upgrade any hardware in your system – and if you have the time to do it:

Do your own research, read lots of reviews, check out prices in multiple places/sites/stores and find out which is the best path for you, at that point in time. No matter what the part is, spend as much as you “comfortably” can (to make it more ‘future proof’). What is the most important/best advice I can give, from 20+ years of technical expertise and real-world experience in the field presented without making a new paragraph so it would be easier to read..? It is this: No matter what computer part you are purchasing, if you are not in a place where “money isn’t an issue”, then watch for “The Jump” in price – that leap or huge gap in prices – and purchase a part that is just in front of that gap (before the large price increase); that is the “Price Sweet Spot”, where you are getting ‘the most bang for your buck’ and other cliche phrases. Most of all though – have fun learning and doing it all!

This Message Brought To You By Troy from The Game Tips And More Blog And Free Websites And Other Things That Made It All Happen

List of Some Sources Researched (not including video benchmark sources):

http://www.techspot.com/review/1220-amd-radeon-rx-470/page2.html
http://www.gamersnexus.net/hwreviews/2544-sapphire-rx-470-platinum-review-benchmark-vs-480-gtx-1060/page-4
http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/73155-amd-radeon-rx-470-4gb-review-4.html
http://www.pcworld.com/article/3104044/components-graphics/amd-radeon-rx-470-review-a-great-graphics-card-with-a-terrible-price.html?page=3
http://wccftech.com/amd-radeon-rx-480-rx-470-3dmark-performance/
https://www.techpowerup.com/reviews/ASUS/RX_470_STRIX_OC/10.html
http://www.tomshardware.com/reviews/amd-radeon-rx-470,4703-4.html

Franchisee Profile: Marc Flame

Franchisee Profile: Marc Flame

Marc Flame is originally from the Bronx in New York, specifically Riverdale. Growing up, Marc spent every summer on Long Island at his grandmother’s beach house and loves the outdoors. After graduating from JFK Highschool, Marc’s parents moved to South America where Marc learned to speak basic Portuguese. After living in Brazil for a while, Marc moved back to New York where he attended New York University. He graduated in 1981 with a degree in Economics and International Business. Upon graduation, Marc spent much of his time on Wall Street starting his career Bankers Trust Company. Marc eventually became Chief Financial Officer at the banks Technology subsidiary. During Marcs’ tenure he established a successful record of improving operational efficiency and profitability. After fourteen years at BTCo, Marc left and joined Citigroup. Marc spent ten years within the Finance Organization of Citigroup. He then joined the CBS Corporation where he served as CFO of the CBS Technology organization.

After doing some traveling, Marc decided to relocate from Chicago to Atlanta where he began researching franchises to invest in. After much research Marc decided that Workout Anytime was where he wanted to be. Not even three weeks after watching the Workout Anytime franchise video, Marc signed for his first franchise. He now owns the first Workout Anytime located on the South side of Atlanta.
How did you learn about the brand? 
I was researching different franchises and was heavily focused on the fast-food industry when I came across Workout Anytime. I watched the franchise video and was immediately hooked. I knew right then that was what I wanted to invest in. Not even three weeks after seeing the video I met with Randy the entire senior WOAT team. It felt like a family and I signed with Workout Anytime after that meeting.
Why did you choose an opportunity with Workout Anytime? 
I’ve always wanted to own my own business. I worked at a Baskin Robbins in high school and it was some of the best times I’ve ever had. I have always enjoyed doing my own thing which is why I started looking into franchises. I chose Workout Anytime because I am very interested in the Workout Anytime model and I really wanted to do a franchise in a market that really needed it. 
Do you have any development/extension plans? Add units? Timeframe? 
I would like to eventually expand. I do not have a multi-unit sign at the moment, but the goal is to have 3-4 locations within 4-5 years. I am trying to open one every year and a half. Currently, I am working to be the most successful location rather than building out more units. When you talk about franchises people have glass ceiling expectations with what you can achieve with any one location. The Workout Anytime model allows me to push the boundaries, and ensure the opportunity for many members to enjoy all the advantages provided to Workout Anytime members.
Are you involved in any charities or involved in the community in any way? 
I am learning more about the Riverdale area each day and would love to work with charities and get involved with the community once I get to know it better.
Do you have any other interesting hobbies or passions?
I love spending time outdoors. Anything outdoors such as going to the horse stables with my daughter, 
watch my son dirt bike on the trails, and go to the beach as often as possible.

Getting Started with a Flipped Classroom

Last week, I shared a bit about why I flipped my classroom, and I got some great questions! Today I want to share a bit more about my process and the logistics for flipping. There are lots of ways to do it, and I’m sure there are many other great ideas out there, but this is what has worked for me so far.

1. Plan your lessons 

a) Does it make sense to flip?
You don’t want to flip for the sake of flipping. I always ask myself, “Would this lesson make sense as a flipped lesson?” There are times when some introductory lessons require lots of hands-on scaffolding, and my answer might be “no.” But other times, when the lesson is mostly information and practice, the flipped model absolutely makes sense.

b) What content must be covered?
I go through my math lesson plan, and determine the content that has to be covered in the video. I’m really selective about this because I want my video to be less than 10 minutes long. It’s still a mini-lesson, after all, and if I go any longer than that, my students will tune out. Plus, even though the video may be 10 minutes, the viewing time could be much longer than that if students are pausing the video to write things down or take notes. I try to keep in mind the idea that less is more.

c) Am I the best person to deliver the content?
Usually my answer is “yes,” but not always. I’ve tried to share videos from Khan Academy or LearnZillion in the flipped model, and the kids just didn’t respond as well to those. They’re more likely to tune in when the video is made by their teacher because they have a personal connection. There were a few times when I’ve used someone else’s videos because the production was significantly better in some regard (e.g., it included songs or humor that I couldn’t pull off). But usually, I make the videos myself.

2. Choose your tools

Once I know the content of my lesson, I decide what method I’ll use to produce the video. I choose from a few different options.

a) Screencasts
Sometimes I have a presentation already created in a flipchart for my ActivBoard, and I can just film my voice interacting with my computer screen on that. My favorite tool for screencasting is Screencast-o-matic. It’s very user-friendly and it uses a yellow circle to highlight your mouse so students know where to focus their attention. The free version works well, but for $15/year, you can get lots more editing and uploading options. If you’re interested in screencasting, I would recommend trying out the free version for a while to see if it’s something you’d like.

b) Whiteboard apps
Usually I use whiteboard apps such as Explain Everything or Educreations to make my flipped lessons. I always create the slides in advance so that I don’t waste precious recording time writing out problems or building models that could simply be explained. Then once all of the slides are in place, I’ll record the audio over them. This approach also allows me to work in pieces, too, because I never know when I’m going to get interrupted.

c) Paper slide shows
I’ve blogged about paper slide shows before here. Sometimes the lessons are a bit more hands-on (e.g., using a protractor), and I want to show students some examples. In those instances, I use my DEWEY Document Camera Stand ($120, www.copernicused.com) that turns my iPad into a document camera, and I work and film underneath it. I mostly use this approach with Geometry and Measurement standards, but when I need to do a lot of physical manipulations, the paper slide show works well.

3. Choose your platform

Once I’ve made the video, I need to upload it to a platform for students to view. YouTube is blocked for students at my school, so I use Vimeo instead. I ended up buying a Vimeo Plus subscription last year ($59.95/year or $9.95/month). That gave me much more space for uploads each week (5 GB vs. 500 MB with the free version), and it sped up my upload times, so it was worth it to me when I was crunched to get the videos uploaded after school. I created a channel for some of my videos, and now I’m going back to re-make some or better tag/organize the videos for each unit.

4. Share your content

Once the videos are uploaded on Vimeo, I needed a way to share the links to the videos. When I started, I was posting the links after school each day, but I eventually cut out that step. Now I make one Google Document each term with all of the dates and lesson topics, and then I just copy and paste the links into that document as they’re done. That helps my students because they find the video links in one spot, and I can post the links as they’re available. Here’s an example of what that document looked like one term.

Bonus Tips

1. Make your videos in batches. 
I found it much easier to make all of my videos for the week at once. I could usually tackle this in a couple of hours each week, and it was much less stressful than trying to film every day. I was able to find my rhythm with the process when I batch-produced videos, so that’s how I try to work now. 
2. Start small.
Even if you only make one video each week, you’re still starting to build a library of flipped lessons for future use. I didn’t make as many videos as I’d wanted to last year, but I’m grateful for the ones I already have done because that’s less work I’ll have to do this year.
3. Divide and conquer.
See if someone else on your grade level team would be interested in flipping with you, and then divide up the lessons. Even if you’re not the one teaching the lesson in every video, the students will appreciate it being someone they know. 
4. Get some cheap .mp3 players for student check-out.
Most of my students had Internet access at home to watch the videos, but a couple didn’t. I wrote a grant to buy 10 inexpensive .mp3 players that students could check out to watch the videos. They didn’t require an Internet connection because I saved the videos straight to the hard drives, and since they were cheap .mp3 players (<$20 each), they didn’t have any bells and whistles to make them targets for theft. It was a workable solution for those students who lacked technology access at home. 
Next week, I’ll share more about what my math block looks like under the flipped model. Until then, I’d love to hear from you. What are some tools you use for video production in your class? What challenges do you foresee with a flipped model? Share your thoughts in the comments section.

Do you have Food Cravings? Food Cravings Test

  • Do you frequently eat until your stomach is uncomfortably full?
  • When you get hungry, does it make you feel tense, weak, or irritable?
  • When you get hungry, do you sometimes focus on one or two specific foods?
  • Do you snack often, usually eating the same snacks?
  • Have you ever had other addictive habits, such as smoking or drinking too much alcohol or overconsuming caffeine?
  • Diet Start
  • Are you often hungry after a meal and stay that way until you’ve eaten one of your favourite foods?
  • Do you usually need dessert after dinner to feel satisfied?
  • Do you tend to eat a relatively narrow range of foods?
  • When you eat your favourite foods, do you often intend to eat only a moderate amount, but end up eating a larger amount?
  • Do you sometimes feel as if you lack control over what you eat?
  • If you snack on foods other than your favourite foods, do you tend to feel unsatisfied?
  • Do you binge on food more than once per week?
  • Even if you know a food doesn’t agree with you, do you eat it anyway?
  • When you eat your favourite foods, do you frequently drift into an almost trancelike state of relaxation?
  • When you eat one of your favourite foods, does it generally improve your mood?

If you answered yes to six or more questions, you are probably overweight. If you’re not, you must have a tremendous degree of willpower or an exceptional metabolism.

When this happens, you will stop eating as much as you now eat, and your metabolism will heal. You will then begin to lose adipose tissue gradually, painlessly — and permanently.

WORKOUT ANYTIME on FOX 56 Lexington

WORKOUT ANYTIME on FOX 56 Lexington

Head Trainer Carl Flotka of WORKOUT ANYTIME Lexington was recently featured on FOX 56 Lexington. In the segment Carl talks about how to portion control during the holiday season and highlights a few exercises that viewers can do to stay active.
View the full segment here.

Solving the Weight Loss Puzzle Part 1

Have you tried to lose weight and failed? If so, you are not alone. 95% of the people who try to lose weight fail to reach their goal, and even less are actually able to maintain their weight loss once they achieve their goal. Obesity and the associated disease diabetes are increasing exponentially in the America despite the many published health warnings about the health risks associated with being overweight.
Why are people unable to lose weight? People are hopelessly confused about the factors controlling bodyweight regulation. This is not surprising when you understand that every single program, book, and guideline developed by various diet “experts”, including our own government, lacks crucial information, contains misinformation, or contains myths. The list of experts and programs seems endless: Dr. Atkins, Dr. Andrew Weil, The Pritikin Diet, Sugar Busters, Protein Power, Dr. Dean Ornish, the Paleo Diet, the Ketogenic Diet, and all the rest. To make matters worse much of the “information” from different experts seems to be completely contradictory.
Take this short True/False quiz to see how much you really understand about controlling your weight and bodyfat levels.
Eating a low fat diet is the key to losing weight
Eating a low carbohydrate diet is the key to losing weight
Most obese people have a slow metabolism
Obesity is a genetic disorder
Some people have a slow metabolism and some people have a fast metabolism
Exercise is not really effective for weight loss
You can eat all you want and lose weight if you do not eat carbohydrates
Low carbohydrate diets are unhealthy
If you eat foods in the right combinations you will lose weight
The key to weight loss is eating healthy not counting calories
Americans are eating more fat than ever before
Americans are eating less fat than ever before

Sound familiar? It should. All these statements have been made by various “experts”. Unfortunately, all but the last one is FALSE. If you want to control bodyweight you have to understand ALL the factors that govern bodyweight regulation and how they apply specifically to you. Stay tuned for part 2 of this article to learn more!

Currently June (?!)

Oh, how I love to start the month with Farley’s Currently over at Oh’ Boy Fourth Gradeespecially when I actually remember that it’s the start of the month and don’t have that revelation about a week in. 🙂

Here we go…

Listening:  I got to see Sara Bareilles perform at a small Atlanta venue on my birthday a couple of weeks ago, and wow – can she ever sing! She’s been in heavy rotation on my playlist ever since.

Loving: The first couple of weeks of summer vacation are always the best because it feels like there’s so much free time ahead. A quick glance at my calendar would remind me that this summer is going to fly by very quickly, but for now, I’m thrilled to have a little breathing room before the hustle and bustle of another school year kicks in.

Thinking: Math is on my mind a lot right now. I’m finishing up my final project for my math endorsement (an algebra unit), and I’m joining multiple book studies about math-related books this summer. My students did very well overall on the year-end standardized tests, but I feel like I’m still scrambling to make sense of the best way to teach the Common Core. I need to figure out something that will allow me to differentiate more without creating oodles of additional work on my end. If anyone has the magic solution, please let me know.

Wanting: We bought a new desktop computer last year, and it was intended to be mostly for my school/blogging/TpT use. That worked for a little while, but my husband has slowly taken it over and claimed it as his. He’s been working crazy hours (he’s an attorney), and his work is often more deadline-oriented than mine, so I’ve given in. But now that I’m getting ready to start my doctorate, it might be time for us to give up on the idea of sharing a computer. I have a work laptop that I use sometimes, but it’s got some crazy restrictions/configurations that limit the programs I can install, etc. For most people, it’s not a big deal, but when you’re a tech-geek like me, it’s frustrating. So last week, I made a big pitch for me to get a new iMac desktop, and he agreed! There were some intense negotiations that went into the process, but in the end, we made a deal that we can both live with. I’m going to be responsible for generating the extra income to make the payments on it (we got it financed over 18 months), but between some tutoring jobs I’m taking and TeachersPayTeachers, I think I’ll be able to swing it.

Now I just need to hold on for Monday when my precious new toy will arrive!

Needing: I need to get organized and prioritize what I need to accomplish this summer because there’s no world in which I’ll have time to tackle my ever-growing to-do list. I need to create some realistic goals with deadlines to keep myself reasonably on-task. I also need to cut out distractions like randomly checking Facebook or email or Twitter every 10 minutes.

3 Vacay Essentials – 1) Shade – I have the misfortune of being allergic to almost every type of sunscreen that exists — including the ones that say they’re hypoallergenic and made for sensitive skin. Put some of that sauce on me and stick me in the sun, and my body breaks out in a terrible, lobster-like swollen rash that is WAY worse than any sunburn I’ve ever had. So I stick to the shade as much as I can, and I visit my dermatologist every year to make sure that I’m not getting skin cancer. Not fun, I tell you.

2) Books – This used to be a huge ordeal before the advent of the Kindle. I like having lots of summer reading options, ya know?

3) Beverages – Hydration is important! And there’s a whole slew of summer drinks that I could put on the list… But seriously, I’ve been drinking at least 64 oz of water each day of this vacation before I even touch anything else, so I think I’m doing well.

Big thanks to Farley for continuing to host this linky. Every month I find so many amazing blogs and learn lots about my fellow bloggers. If you aren’t participating already, you should definitely link up!

,
Have a great June, everyone!

Integrating Peer Feedback

Sometimes my students surprise me.

We’re studying the Measurement and Data standards right now in math, and we were struggling a bit with 4.MD.2 – the measurement word problems standard. We’ve been using some of the free math units from Engage NY (a resource I highly recommend), and we were on day 3 of working through word problems, and I knew I had to mix it up a bit. Here’s what we did.

First, students worked through 6 word problems from module 2. The word problems were multi-step and used many different types of metric measurement. They completed these problems independently, but they could consult other students if they got stuck. Once everyone at the table finished, they checked their work with each other to make sure they agreed on the same answer.

Next, I assigned each table a different focus problem from the 6 that they solved. They had about 10-15 minutes to work together to design a poster that explained the problem and solution. They could represent their work any way they wanted, but the work had to speak for itself — they wouldn’t be there to explain the poster to anyone else.

Once the posters were completed, I gathered the students together on the carpet, and we reviewed the Standards for Mathematical Practice using these posters I’ve made:

We talked about using these standards as opportunities to give feedback. We also discussed how effective feedback needs to be specific and constructive. If you like something, say what, specifically, you liked and how it helped communicate an idea. If something needed to be improved, explain what and how that could be done.

Once I felt like the students had some ideas for ways to give good feedback, I had the students do a gallery walk around the classroom to look at the other posters. In a gallery walk, students use sticky notes to comment on other people’s work. They can leave positive and/or constructive feedback. I let the students comment anonymously if they wanted, and they were able to reference the SMP posters if they needed ideas (I gave them access to a digital copy on their iPads). I used a timer, and they spent 5 minutes studying and commenting on each poster before rotating.

Once they’d rotated through all of the posters, the returned to the poster their group had made, and they took a few minutes to read the feedback. I had them work together to sort the feedback into the categories “helpful” and “not helpful.”

We shared a few examples of helpful comments with the whole class:

  • “I like how the team drew pictures to represent the problem, but I think the team could have explained what each picture represented from the problem.”
  • “The pictures aren’t in proportion to one another. The drawing of 1,500 mL is much larger than 3 L, but really the 3 L should be larger.”
  • “Something I really like about your poster is that it has pictures to represent the problems. One thing that you could have done differently is represent the subtraction and addition with a tape diagram.”
  • “You could have represented the answer in mixed units to make your answer clearer.”

We then talked about unhelpful comments — one word comments or feedback that focused more on style than substance.

Overall, this lesson was very helpful in getting the students to think about the Standards for Mathematical Practice and how to give effective feedback. Each group had ideas for things they wanted to change on their posters based on peer comments, and some groups even asked to work on it more during recess! It was also a good reminder for me that students can give each other powerful feedback, and I need to provide them with more opportunities to do this across the subject areas.

If you’d like to get a copy of my student-friendly Standards for Mathematical Practice posters, they’re available in my TpT store by clicking the image below.

What are some ways you incorporate peer feedback in your classroom? I’d love to hear more ideas in the comments section!

Teacher Toolbox Trio Linky Celebration!

Since the advent of Teachers Pay Teachers, my teaching toolbox has changed quite a bit. There are so many things that I’ve made or bought for my classroom, and there are many others that are on my wishlist. To recognize that, I’m hosting a Teacher Toolbox Trio linky party.

Here are the rules of the trio:
1. Share a product that you’ve made that you couldn’t live without.
2. Share a product that you’ve purchased that you love.
3. Share something from your wish list that you’re hoping to get for next year.

If you’re not a seller on TpT, no worries — just share two products you’ve purchased that you love!

1. Something I’ve Made

The Classroom Economy Megapack was my first major project for TpT, and without question, it was the one that I used all the time last year. It has everything I needed for setting up my classroom jobs, monitoring daily behaviors on a clip chart, running my classroom economy, and giving students free/very low-cost rewards. Unlike my units that were used here and there, this was on display in my classroom all 180 days, and my kids loved it. This is the one thing that I could not live without.

2. Something I Purchased

Erin’s “A Roller Coaster Day” sub plans were amazing! I had to go to an all day district committee meeting on a Friday in May when the kids were already getting a little crazy, but they LOVED this. The sub said it kept them engaged all day, and given that I was already at the stage of the year when all of our required curriculum had been taught, it was perfect. It will be a permanent addition to my sub folder, and she’s also made one for grades 5-6. You can follow Erin’s blog: I’m Lovin Lit. 

3. Something on My Wish List

I’m really planning to focus on math facts and mental math skills early in the school year, and Laura Candler’s Mastering Math Facts has been on my radar screen for a while. I’m hoping to snag a copy before I go back in July. (Yes, July!)  Laura’s blog is Corkboard Connections.

The Linky Celebration

This is more than just a party — it’s a celebration! I’ve been meaning to do something to celebrate hitting 100 followers for a while now, and as I near the 150 mark, it’s definitely time! If you link up through the tool below, you’ll be eligible to win a $25 gift certificate from Teachers Pay Teachers — enough to possibly clear off some items from your own wish list!

clip art from KPM Doodles
I’ll be using a random number generator to select the winner from those who link up. The linky celebration will end next Friday, June 14 at 11:59pm EDT and the winner will be announced on my blog on Saturday.
Can’t wait to discover some new products and see some of your favorites! Be sure to link up below, and please include the Teacher Toolbox Trio icon and/or another link to Eberopolis in your post.

Happy linking!
document.write(”);

Deals and Sales: Saints Row 2 and Syberia II, TotallyFree™ [Notification]

Update: As of Sunday, April 23rd, Saints Row 2 is no longer available for Free, but Syberia II still is

I haven’t been feeling too great lately (hence my not posting for a while) – but I wanted to make sure and come and get a quick notification out, for those that don’t know and are interested – that I saw two games being given away TotallyFree™ right now:

Saints Row 2, the open-world, GTA-style Action game is at GoodOldGames (now just GOG, they also offer newer titles these days), found at GOG.com

and

Syberia II, the third-person, mouse-driven Adventure game is being given away at Origin’s “On the House”, found at Origin.com

Both are completely free, so go get them now! GOGOGO

[Note: I do not get any compensation in any form for mentioning these games or companies here (there are no ‘referrals’ or ‘trackbacks’ in the links above); I am just a gamer who likes to share things I figure out and find on my own here, with you, other gamers… Have fun!]

Cellulite Breakdown and Essential Detoxification part 2

Beware the Heavy Metals

Whether or not you go for music of the same name, heavy metals in your body are something you want to get rid of. These elements, the concentration of which has increased dramatically in our air, foods and water since the Industrial Revolution, can seriously interfere with your body’s metabolic functioning and thus challenge its wellbeing. Mercury tends to suppress the levels of white blood cells involved in the immune response. Cadmium displaces the essential element zinc needed for a great many of your body’s enzyme systems and renders them inefficient and even inactive (including those that build new collagen and elastin for skin and connective tissues). In the West we now have a concentration of lead in our bodies some 500 to 1,000 times that of our pre-technological ancestors. High levels of this heavy metal age us prematurely, interfere with our mental processes, suppress immunity and contribute to depression. Aluminium, another heavy metal, detrimentally affects the central nervous system. It has recently been associated with the development of pre-senile dementia or Alzheimer’s disease.

Diet Start

The presence of all of these elements in excessive quantities (and their concentrations in the human body appear to be increasing with each passing decade) generally interferes with the metabolic processes on which good body ecology and therefore the absence of cellulite depends. It is important to do everything you can to eliminate them from your body. (The alginates, forms of fibre found in seaweeds, also chelate heavy metals and adding sea plants to your diet on an ongoing basis is a good idea, after your applefast is finished.) You also need to be aware of ways you can protect yourself from allowing heavy metals to build up in the first place. Here are a few suggestions:

  • Steer clear of tobacco smoke and exhaust fumes
  • Don’t buy fruit or vegetables from shops in the street where they have been exposed to leaded exhaust fumes
  • Don’t cook in aluminium pans
  • Eat plenty of fibre and nutrient-rich vegetables and fruits.

More Than An Apple A Day

Now let’s get down to the programme. An applefast can be done by any healthy person provided of course your doctor agrees. It was taught to me twenty years ago by Dr Gordon Latto, a British medical doctor who uses nothing but food and breathing and a few herbs to heal even the most complex and chronic conditions. He is almost 80 and one of the most remarkably healthy and vital men I have ever met. The applefast lasts for two or three days (never more, except under doctor’s supervision). You eat only raw apples — as many varieties as you want — for breakfast, lunch and dinner as well as in between. Eat all you want, but chew well and always crunch up the seeds too. They contain valuable nutrients that help the process.

During the applefast you need to give up all tea and coffee although you may have as much mineral water or herb tea made with mineral water as you please, sweetened with a little honey if you prefer. The best herb tea of all for The Breakdown is solidago or golden rod which you can get from a good herbalist. Like nettle, it has natural diuretic properties to help shift some of the stored water in your tissues but, unlike nettle, it actually tastes pleasant.

Don’t be surprised if you suffer the odd headache during this dynamic two or three days clear out. (Especially if you have been a dyed-in-the-wool coffee or tea drinker.) This is a sign that the whole process is happening rapidly. If you do, then take a 20-minute epsom salts bath and lie down in a darkened room to rest for 15 minutes afterwards. (More about this in a moment.)

External work on your body is important too to trigger the detoxification process. Start now to incorporate skin brushing into your daily routine. After the applefast is over continue doing it but begin to use other techniques as well to enhance lymphatic drainage, to help break up hardened connective tissue, and to keep the detoxification process going while you are rebuilding new, strong connective tissue and ground substance.

Blog Hunting

Today I was hoping to link up with Laura Candler’s Corkboard Connections Blog Hunt, but it seems that linky closed already [sadface].  Still, I want to share a little about what I’m using as my Google Reader alternative and why.


In my mind, this is a battle between BlogLovin’ and Feedly.

BlogLovin’

I’ll confess that I didn’t move over to this platform initially. As soon as I caught wind a few months ago that Google Reader was dying, I quickly packed up and moved over to Feedly. With all of the recent push in the teacher-blogger community toward BlogLovin’, however, I decided to give it another try.
What I like
As a blogger, there are a few features that I really like about BlogLovin’. 
1. Notifications and Blog Finding
I like that I can get notifications when new people start following me. I also like that when I click on those notifications, I can see what other blogs people are reading. I’ve stumbled upon some great new-to-me blogs that way over the past few days. 
2. Viewing actual blogs
Rather than seeing a stripped down version of someone’s blog, I can see the actual website in a BlogLovin frame. This allows for easy commenting when I want to leave comments. It also lets me see how cute everyone’s blog is these days.
What I dislike
1. Too many clicks
It seems like it takes forever to navigate sometimes, and I’m constantly clicking to mark things read, jump between blogs, and if I actually leave a comment on a blog, I lose my place in BlogLovin and have to start over with the remaining unread blogs. I subscribe to hundreds of blogs, so I have to be efficient when I’m looking at content. 
2. It’s still buggy
I tried to go back and organize the blogs that I read into categories the other night, and I found that BlogLovin wasn’t saving my organizational changes for blogs unless I categorized them as soon as I started following them. That was annoying. I also noticed that some blogs that I’m certain I was already following were showing up as unfollowed. Others were showing up multiple times in my reading list. I suspect that a lot of these bugs will improve — I saw iPad updates for the app yesterday, so I know they’re working on it, but I wish a lot of these features were already working better.

Feedly

Since I’ve been using this for a few months already, I’ll openly confess that I’m a bit biased. It may also be the case that I’ve got this platform more figured out than BlogLovin, and some of the “advantages” of Feedly may exist in BlogLovin, too. But here’s what I’ve found…
What I like
1. Better app integration
There are several different apps that I like to use when I’m reading blogs (and in this case, I’m talking about web-based apps, not iPad apps).
Pinterest – Feedly has Pinterest integration built in, so I can hover over an image and pin it straight from Feedly. The pin will link back to the original blog.
Buffer – Buffer is an app that I use to schedule Tweets so that they’re spaced out throughout the day rather than sent all at once as I read blogs. If I read a blog post that I really like, I’ll send it to Buffer to share with others.
IFTTT – If This Then That is an app that sets up certain actions based on commands that I give. For example, if I star an article that I like in Feedly, it will automatically send it to my Evernote notebook with tags that I set. There’s a whole list of IFTTT recipes for Feedly here. 
Evernote – I can send items straight to my Evernote notebook from Feedly as one of the sharing options.

2. Easy navigation
There are lots of easy keyboard shortcuts to use to go through articles when I’m reading on my computer, and it’s very easy to organize articles in categories. Even when I’m behind in my blog reading, I can get through it pretty quickly without feeling like I’m missing important content.

3. Marking articles
I know I can “heart” articles on BlogLovin, but I can mark articles on Feedly for later with specific tags that make them easier for me to find. For me, that’s a better equivalent to starring articles on Google Reader, and I did that a lot.

What I dislike
1. Somethings get lost in translation
Sometimes the pictures don’t get pulled into Feedly correctly (which might not be Feedly’s fault), and I probably miss out on some cool content because of it.

2. Commenting is more complicated
I still have to click to go to the external link of the original blog post to comment or read comments. This is especially complicated when I’m using the iPhone or iPad apps. When I’m on a mobile device, I usually mark the article I want to comment on for later and check it out when I’m back to my computer.

And the winner is…Feedly, mostly

At least for now, I’m sticking with Feedly. I still like visiting BlogLovin’ to find new blogs to follow, but my new strategy is to follow on BlogLovin’, and then I add it to a list called “On My Feedly.” Then I add the blog to one of my reading lists on Feedly. Then when I go into BlogLovin’, I can immediately mark the “On My Feedly” list as read because I’ll know I’ve seen it all on Feedly. There are a bunch of new blogs that I started following as I was trying out BlogLovin’ that aren’t on my Feedly list yet, so that will be a process to move those over. It’s not a perfect system, but I expected some growing pains in the transition. 
I’m going to continue to use BlogLovin to discover new blogs because that’s a huge benefit in my mind.
Where did you land in the Google Reader alternative battle? I’d love to hear what you chose and why in the comments section! 

My trip to Dhaka, Bangladesh

It was quite an intense process to pin down the existing system. It existed in bits and pieces in various places of the organization managed by different people in the structure. It was quite unique to find an organization with a finance management system spanning from resource mobilization (Income generation, contracting and applying for donor funding) to implementing through 3rd parties (implementation through contractors as well as other civil society organizations) but not to have it documented any ware. It was a tough job to get agreement on the current practices as well, as each individual seems to have tweaked it to suite his/her requirement. Finally we documented the entire system as the minimum agreed common current practices.

This is typical of an organization which has grown organically and reached a point that does not allow it to grow any further without structure and form in its organization structure and systems. As a result of this the assignment has ballooned into a much bigger assignment as the organization needs basic guidance regarding system development and management. I was also able to analyze the system and suggest some key improvements (fundamental stuff really) to instill the use and management of the system. The client has now requested that I support them in the preparation for implementation which needs a lot of pre planning and documentation in the form of developing policies, manuals, forms, job descriptions, task calculation etc. It also means that we have to design the administrative and functional structure so that the organization can manage a decentralized finance function spanning the entire spectrum of financial management.

I left Dhaka on Friday and headed back to Colombo. The flight from Dhaka to Bangkok on TG was fine and operated on time. I had a 5 hour stay in Bangkok before I took the flight to Colombo. I must say that I don’t find the new airport at Bangkok as passenger friendly as the earlier one. The new one however is big and posh but it has lost some of its coziness in my opinion. As usual the Colombo flight was delayed for over a half an hour and once in Colombo had to endure the long queues at the emigration counter.

I am back in Colombo and back at work to finish another assignment (OCA) I took concurrently and had a junior consultant do some parts of it. I have to send its draft report by the end of business 6th April. My next assignment is going to be in the Philippines and looking forward to it as it will be my first assignment in the Philippines.

Planetside 2 – Video Tutorial: How To Attack and Defend a Facility – Bio Lab (Subtitled) [Short Version]

In this brief Tutorial focused on New Players to Planetside 2, I present concepts to attacking and defending a large facility with multiple objectives, such as:

  • capture points
  • shields
  • generators
  • spawn rooms
  • terminals
and more…
In the video below, I am playing on the New Conglomerate FACTION. I CAPITALIZE full words that are either important structures and names to remember, or are important concepts to learn for battle.
During this battle at a large base, I show briefly how to use your HUD (Head Up Display) to locate OBJECTIVES, what some icons on the screen represent, where major structures are and important areas and aspects of the base.

Although my FACTION successfully takes over a Bio Lab, many of the concepts presented in the tutorial will carry over to battles at other large facilities, such as Amplifier Stations and Technological Plants.
[A separate tutorial for an Amp Station can be seen here:
http://gametipsandmore.blogspot.ca/2012/12/planetside-2-video-tutorial-how-to.html]

With subtitles over sections of a Bio Lab battle, playing as the NC (New Conglomerate), I go over some concepts a few times to make sure they set in for New Recruits, but for the most part, I stick to the main objectives of the base and how to quickly locate them, as well as the various ways to get inside..
Enjoy and See You In the Game!

EUROPEAN STYLED DESIGN IDEAS BATHROOM

EUROPEAN STYLED DESIGN IDEAS BATHROOM

If you are looking for the best images of the sample of European-style bathroom designs, and applications of a modern sauna and gym. Here are sample images of European inspired bathroom design ideas for the home. European influence in a bathroom attached to the right furniture, cabinets bath faucets, vanities, and tile e. As well as their luxurious and spacious sauna Finish Head (European company based in Germany) in a corner, the rest of the spacious bathroom, as the essay should be dedicated to wellness and keep beautiful. Room with a bright red Finnish sauna focuses on physical fitness, also welcomed the formation of large area white cushions and fitness equipment attached to the wall. It makes sense that this is quite large, walk-in glass shower. If you have more time, is set beside a white bath has a sauna, in front of two large floor to ceiling windows.

The second room is here in a Finnish sauna takes gentler approach – offering a job to escape from their mental well-being of the outside world. solarium luxury, you can pull out in front of a soothing fire. Wide bubble bath, shower and steam bath in a wooden soaking dip to give you a variety of bathing options. You can easily live in the house of a modern European hits with a private bathroom attached.

EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM
EUROPEAN STYLED DESIGN IDEAS BATHROOM

Reminder: Diablo II – 2014 Ladder Reset is May 27th

That’s right, this is just a quick reminder that tomorrow is the Diablo 2 Ladder Reset for 2014!
So get ready – stock up on energy drink and tell your friends you won’t see them much for the next while – and get on that Ladder! Have fun playing, my wonderful readers – and enjoy being on the Top Of The Heap
(at least until the botters get going)
See You In The Games!

the 2018 La Jolla Concours Best of Show award was presented to the Mullin Automotive Museum for their 1939 Bugatti Type 57SC Aravis Cabriolet.

The Mullin Museum is a must see, they have an incredible collection of Bugatti. Probably the 2nd best collection you will ever be able to see, and probably the only Bugatti collection in the USA available to the public.

http://justacarguy.blogspot.com/2012/01/mullin-museum-what-it-looked-like-from.html  for a quick look

http://justacarguy.blogspot.com/search/label/Mullin%20Museum  for all the galleries from when I was there in 2012

and for a more thorough gallery of this car http://justacarguy.blogspot.com/2011/12/beautiful-bugattis-from-mullin-museum.html  and that’s why I didn’t take another set of photos… there isn’t much reason to look at two sets of the same car.

The Sims 2 “Ultimate Collection” (Absolutely Everything) – Completely Free from EA

When I first read about this from EA, that is, the possibility of getting absolutely every single expansion and “Stuff” add-ons completely free, I thought there must be some mistake… A little bit of reading at the EA website and I inferred from the phrasing that it was initially going to be offered as a free upgrade to current owners of The Sims 2 (Digital/Download or Disc-based versions); but I did a little more reading about it today and it seems that EA may be ‘planning on putting it “in everyone’s game list” eventually’… [in my opinion] most likely to arouse just-a-little-more interest in The Sims franchise for the upcoming “The Sims 4” release (now available for pre-order, slated to be released in September 2014).

Therefore, now feeling fully-okay-mostly safe from the dark shadows of ‘releasing something that wasn’t meant to be distributed’, I share with you the Product Code that will allow you to be the proud owner of “The Sims 2 Ultimate Collection”, which includes all of the below:

  • The Sims 2
  • The Sims 2: University Expansion
  • The Sims 2: Nightlife Expansion
  • The Sims 2: Open for Business Expansion
  • The Sims 2: Pets Expansion
  • The Sims 2: Seasons Expansion
  • The Sims 2: Bon Voyage Expansion
  • The Sims 2: FreeTime Expansion
  • The Sims 2: Apartment Life Expansion
  • The Sims 2: Family Fun Stuff
  • The Sims 2: Glamour Life Stuff
  • The Sims 2: Happy Holiday Stuff
  • The Sims 2: Celebration! Stuff
  • The Sims 2: H&M Fashion Stuff
  • The Sims 2: Teen Style Stuff
  • The Sims 2: Kitchen & Bath Interior Design Stuff
  • The Sims 2: IKEA Home Stuff
  • The Sims 2: Mansion & Garden Stuff

Wow, thanks EA!

Note: this package release may be time-limited and EA has stated that they will no longer be updating The Sims 2 or it’s expansions, although they can still be contacted if you are having technical problems running the game

Here are the steps to redeem the free Activation/Product Code:

  1. If you don’t already have it installed on your system, download and install the Origin game client from EA [it is similar to Steam and other game management interfaces] from http://origin.com/download
  2. Create an Origin account if you don’t already have one at https://connect.origin.com/create and log into the Origin client
  3. In the pull-down menus at the top of the Origin interface, click on “Origin” and then “Redeem Product Code…”
  4. In the white box [field] under Product Code, enter this:
    I-LOVE-THE-SIMS
    [hyphens may not be needed]
  5. You should then see a message that the activation was successful and you are the newest owner of  [oops, I forgot what year I’m in, I mean a temporally licensed user of]  The Sims 2, along with all possible Expansion Packs and Add-Ons
  6. Select the game in your My Games list in the Origin Client and install it by clicking the Download button that pops up [and if you’re like me, click OK to the Insufficient Disk Space message]
  7. That’s it! 

Enjoy playing The Sims 2 once again, experiencing all that this version could possibly offer.

Have fun with it and See You In The Games!

Astaxanthin – Anti-Oxidant Superstar

While many antioxidants can be obtained by eating organic fruits and vegetables, astaxanthin is derived only from a specific microalgae called Haematococcus pluvialis.  The algae uses astaxanthin to protect itself from intense sunlight, ultraviolet radiation and low nutrition.

There are two natural astaxanthin sources: the microalgae that produce it and the salmon and krill which consume the algae directly. The best resources for these foods are wild-caught Alaskan Salmon and Krill Oil Supplement, which offer many other nutritional benefits.

Research indicates astaxanthin may benefit those suffering from inflammatory conditions including arthritis, rheumatoid disorders, metabolic disease, as well as cardiovascular, neurological and liver diseases.

Astaxanthin can also help to increase your muscle capacity and stamina, decrease workout recovery time, and decrease muscle pain.  Other proven benefits include:

Reduction of Inflammation
Protects Vision
Enhances Heart Health
Decreases Oxidative Stress
Protects Against Sunburn
Boost Your Immune System
Helps Prevent and Fight Cancer

Astaxanthin and Eye Health

Astaxanthin is an extremely powerful anti-oxidant:  65 times more powerful than vitamin C, 54 times more powerful than Beta-Carotene and 14 times more powerful than Vitamin E.
Astaxanthin crosses the blood-brain barrier AND the blood-retinal barrier which is a huge deal for your brain AND your eyes!

Astaxanthin is a member of the carotenoid family of anti-oxidants that include beta-carotene, lutein and zeaxanthin.   Of all the carotenoids, only zeaxanthin and lutein are found in the retinas of your eyes.  This is because your eye is a highly light and oxygen rich environment, and it needs a large amount of free radical scavengers to prevent damage. 
Scientists have specifically studied astaxanthin for its effects on the eyes and discovered that it is completely safe, and much more potent than all the other carotenoids.   Specifically it has been shown that astaxanthin supplementation can be effective in preventing a whole list of eye diseases including:

Age-Related Macular Degeneration
Diabetic Neuropathy
Cystoid Macular Edema
Central Retinal Arterial and Venous Occlusion
Glaucoma
Inflammatory Eye Diseases including retinitis, iritis, keratitis, and scleritis

Astaxanthin is one of the few anti-oxidants that you should consider supplementing because you cannot obtain the recommended dosage from your diet alone.      The good news is that there are excellent Astaxanthin Supplements available from companies like Jarrow, Doctors Best, and Swanson to name a few.   It should be taken with a meal with fat because it is fat soluble with dosage from 4mg – 12mg per day although there are no harmful effects from higher dosages.

5 Ways to Use iPads in Math

Today I’m linking up with the Tune into Technology Linky to share some ways to integrate technology in Math. Since I teach in a 1:1 iPad fourth grade classroom, I’ll focus on how we use iPads in Math.

1. Build a Math Notebook in Evernote



Evernote is my all-time favorite note-taking app, and that extends to math as well. In addition to typing text notes, students can attach documents (handouts, activities, etc) that they’ve viewed on their iPads and they can also take pictures through the app or attach pictures from the camera roll. That’s helpful when they build models with manipulatives and want to archive their work.

2. Reinforce concepts or conduct inquiry research with math movies.

BrainPop
Khan Academy



Two of my favorite apps to use in math are BrainPop and Khan Academy. I often use these to introduce a lesson or to differentiate instruction. I often feel like I get stretched pretty thin during math instruction because I have such a range of skills in my classroom, but these apps help. If I’m working with a student and a second student needs help, I can direct that student to a video on Khan Academy and encourage the student to see if that will help him or her figure out the problem until I can get there. Often the additional examples help the student understand the problem better.

3. Make math movies to assess understanding

Show Me

Explain Everything

I often ask students to show their solution to a problem on an app like Show Me or Explain Everything. There they can model their thinking using pictures or drawings, and they can record their voice as they explain their work. I learn so much about their understandings through their explanations, and it helps to assess the Standards for Mathematical Practice included in the Common Core.

4. Make a Vocabulary Notebook in Keynote

Keynote


I like to use Keynote for their math vocabulary because we can create slides that use the Frayer Model for vocabulary instruction. In addition to typing definitions, examples, and non-examples, they can draw their own pictures on a whiteboard app, take a screenshot, and add them to the slide. They can also search for real-world examples to photograph and add. Once they’re finished, they can easily alphabetize their entries by rearranging the slides.

5. Use QR codes
Our math word wall has QR codes linking to the definitions of each term so students can quiz themselves about the meaning of a term or review terms they’ve forgotten. If you click on the image below, you can get a freebie example of this for the properties of multiplication.

My complete sets for grade 4, grade 5, and 4/5 combo are available at my TpT store.

We’ve also written riddles in Geometry where students could scan a QR code to find the answer. You can read my post about that here.

And we’ve used QR codes to help check homework assignments. I’ve written about that here.

I’m really just scratching the surface here — there are so many other possibilities and several math specific apps to use, but I’ll save those for future posts. I’m excited to read other examples of integrating technology into math, though, and if you haven’t visited the linky yet, you definitely should. I got so many great ideas for reading and writing from it last week!

How do you use technology in Math?

Overweight and Food Sensitivity Rule No 1: Delayed Reactions

These are the single most common cause of false fat.

Arguably, delayed food reactions cause as many health problems as some of the most horrific of life’s various risk factors, such as smoking or stress. The effects are often subtle and accumulate slowly, but the harm is undeniable. Without a doubt, delayed food reactions cause weight gain. Because 300,000 people die each year from obesity-related problems, anything that exacerbates weight gain is a serious issue.

Therefore, the average person’s ignorance about delayed food reactions is a serious public health problem. Don’t let yourself be a victim of this lack of knowledge!

Delayed food reactions are very similar to classic allergies. The biggest difference is that when you have sensitivities, you often don’t notice symptoms right after you eat. Sometimes it can take as long as three days for symptoms to appear. The reason for the delay is that this type of food reaction is caused by a different antibody than the one that causes classic food allergies, and it takes longer for allergens to come in contact with this antibody. This antibody, IgG (or immunoglobulin G), is found only in the bloodstream, so food molecules need to reach the-bloodstream for problems to occur. As long as food macromolecules stay in the digestive tract, no symptoms may appear. Sometimes food molecules move out of the digestive tract almost immediately, but sometimes they don’t.

Diet Start

When reactive food macromolecules do eventually meet up with IgG antibodies, the antibodies wage the same basic type of battle fought by IgE antibodies, which cause classic allergies. The IgG antibodies call the immune system into the fight, and histamines and other chemicals are released, causing swelling and other symptoms.

The IgG antibodies are by far the most common antibodies in the body. They’re three times more common than the IgE antibodies that cause classic allergies; that’s one reason delayed food reactions are more common than classic allergies.

Because IgG reactions are delayed, people are often unaware of their real cause. If you feel a symptom on Monday morning, it may be hard to link it to something you ate Friday night.

Another reason people are often unaware of their IgG reactions is that these reactions often don’t occur in obvious places, such as the skin, as do classic IgE allergies.

Even though an IgG reaction may not be obvious, it can still be very harmful. For example, if you’re allergic to bee stings and get an IgE reaction on your skin from a sting, you’ll be sure to notice and treat it. However, an internal IgG reaction to a food may ultimately cause you much more generalized, systemic swelling than a bee sting; it’s like getting a bee sting to the whole body. But because your reaction is spread over your whole body, you may not be very aware of it. All you’ll notice is that you don’t feel good and have more bloating and swelling. After you’ve read this book, though, and learned what to look for, I guarantee that you will notice how drastically food reactions affect your body.

Another antibody that can cause delayed reactions is IgA. IgA fights at the front lines — at the mucous membrane sites and in the digestive tract itself — trying to stop allergens from being absorbed by the body in the first place. To do this, it stimulates secretion of mucus, which blocks absorption.

Studies show, though, that almost half of all Americans don’t secrete enough IgA. Non-reactive people secrete 3,000 to 5,000 mg of IgA every day, but some reactive people don’t secrete much at all. If you’re low on IgA, sooner or later a reactive food molecule will work its way through your intestinal wall and cause a reaction. The more reactive foods you eat, the more likely you’ll be to use up your supply of IgA and lose your front-line force against food reactions.

Therefore, if you do ‘cheat’ and eat an allergenic food, it’s smart not to eat too much of the food. One jam doughnut might get blocked by IgA, but three doughnuts may overwhelm your forces and push you past your allergic threshold.

Another factor that depletes IgA is use of certain medications, including antibiotics, antacids, ulcer drugs, cortisone and aspirin. Again, as you can see, it’s not just what you eat that can hurt your metabolism and make you fat.

Fallout 4: High Resolution Texture Pack (Free DLC) Is Now Available [Notification]

For those that haven’t heard yet, as mentioned last week at their site here, Bethesda has released a High Resolution Texture Pack, that is now available for free, downloadable via Steam.

The graphic ‘upgrade’ includes ‘native 1440p’ textures [which means the textures themselves are 2560×1440 pixels in size – but remember, textures usually aren’t displayed at Full Size, they are squished into say, the sides of a gun, or a sign or other things in the world – even if they cover a large wall in the game, they will usually not display ‘at full native size’ – and even if they do, they can be repeated (“tiled”) to fill in the space of objects needed, in the game world – basically, 1440p textures should make the game look great]. It also includes Enhanced Draw Distancing and God-Ray tweaks [those glow-y, streaks of light, showing up especially when a source of light is behind something, such as the sun behind trees or buildings].

Now, up until this release, I personally was playing with SweetFX a lot in FO4, having fun increasing Sharpness and Shading, dealing with the Aliasing, taking Screenshots and ‘Realistic Photos’ and ‘Close-Ups’ (with Depth-Of-Field, etc) of some of the Characters in the game. These can be found here, at a slowly-growing Flickr page I started for The Blog. A couple examples of these, taken with ‘SweetFX in ReShade’ are just below – I look forward to what the entire game could possibly look like with the new High Resolution textures!

Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size
Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size

ReShade by Crosire (reshade.me)
SweetFX by CeeJay.dk (ceejay.dk)
Game Material by Bethesda Game Studios (bgs.bethsoft.com)
Captured by Troy from The Game Tips And More Blog

Since I don’t actually have room for it on any of the drives I have Games on at the moment [which seems to always happen when something cool comes out, of course], I will be moving some things around and uninstalling other games I am not playing at the moment, to make room for this big fella…

It is an optional/separate “DLC” download, weighing in at a hefty 58GB installation through Steam. Once I get it going, I will be working on a QualityTest for it, comparing the graphic look between the two versions and what they really look like in-game – as well as the Performance Hit the Texture Pack creates – look for that coming post Soon™ if you are waiting to see what they look like or if it is ‘worth the download’; but if you can’t wait and want to get started seeing it yourself, go get it via Steam for free now, here.

This free download, by the way, is – in Bethesda’s own words, “…a love letter to our amazing PC fans that have supported us – not just with Fallout 4, but across multiple decades and games…”. 
Right back at ya’, Beth! 
“Thank You” ~ Sincerely, The Game Tips And More Blog

Header and Footer Images captured by Bethesda, from their example screenshots of the High Resolution Texture Pack

How to Deal with Yourr Seasonal Allergies

S
Seasonal allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
What are Allergies Anyway?
Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
Strategies for Allergies
Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
Increase your intake of Omega 3 Fatty Acids from cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
Nutritional Supplements for Allergies
There are several highly effective nutrition supplements for allergies including some key herbs.
Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and a good quercetin supplement is a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.    Another excellent Quercetin Supplement is “Qforce” – http://www.qforce.com/ Quercetin is proven to decrease yur chance of contracting a viral illness like the cold or flu by 9 times!
Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

My Trip to New Delhi & Hyderabad

I am in New Delhi doing an assignment which requires me to do an organization capacity assessment of 5 research institutions in India to ascertain their capacity to receive research grants.

The journey was interesting as the flight I took had a group of tourists (religious pilgrimage to Buddhist sites in India) of whom a majority were first time flyers. So it was fascinating to see the excitement in their faces as the flight progressed; from the smallest kid to the old folk (Gray haired men and women who were in their late sixties) started to peer through the windows to steal a glimpse of the geographic features below. I instantly recalled my first flight (which I took to the UK) when I was just a teenager.

I had dreams of sleeping in the flight; however the rest of the passengers were too excited to be quiet. They were talking in loud voices and moving about so much that sleeping was not an option.

I arrived in New Delhi and managed to go through the immigration very fast and managed to get my luggage fast as well. However when I went out of the airport my pick up had not arrived; so after waiting for half an hour I took a prepaid taxi to the hotel. As a seasoned traveler to New Delhi, I advice all travelers to Delhi to take a prepaid taxi and always have the hotel name and address handy. Also have the telephone number of the hotel so that the taxi driver can call (they all have mobiles) the hotel and get directions if he does not know the place exactly. So without too much of looking around the driver found the hotel.

My past experiences with research organizations have been limited to engaging them for research in preparation for various assignments. I am looking forward to this assignment as this is the first time I will be doing work for research organizations.

The Question of Alcohol in you Diet

Alcohol, like caffeine and nicotine, is a drug. As such, it is capable of bringing about serious damage to mind and body when taken over a long period of time. Made from the fermentation of carbohydrates with yeast enzymes, alcohol is rapidly absorbed through the digestive system, affecting coordination of the muscles, nerves, and vision. It also stimulates stomach secretions, inhibits mobilization of lymphocytes so that the body’s ability to fight infection is reduced, and causes sludging in the red blood cells, thereby reducing oxygen to the heart and lungs. And it affects the brain, adversely affecting the specific centers that govern self- control, judgment, and personal inhibitions.

Alcohol is a depressant. The transient feeling of well-being that goes with a couple of glasses of whisky or a dry martini—the “lift”—is followed by a series of miseries to which your body is subjected, not the least of which, for a woman, is the effect drinking alcohol has on the liver. And the insidious thing about the detrimental effects which alcohol has on health and beauty is that they occur even to the average social drinker, not just to the serious drinker and the alcoholic.

A joint study by Dr. Charles S. Leiber of the Section of Liver Disease and Nutrition at Bronx Veterans Administration and Dr. Emanuel Rubin of the Department of Pathology at Mount Sinai School of Medicine showed that too much social drinking can cause serious damage to the liver, even though the drinker may feel fine, act normally under the influence of alcohol, and not be an alcoholic. Leiber and Rubim took a group of healthy nonalcoholic volunteers and put them on a carefully controlled eight-day drinking regimen. Then they tested the subjects’ livers to see what changes, if any, the alcohol had caused. The amount given to a particular group was considered equivalent to the average intake of a business executive-7 ounces of 86-proof whisky per day for the first four days, 11 ounces for the new two, and then 14 ounces for the last two. The results were surprising: there was an increase in the fat levels in the subjects’ liver of from five to thirteen times, all in only eight days, and in spite of the fact that the diet of the subjects had been supplemented with vitamins.

Diet Start

Similar studies have turned up similar results. Researchers have also found that liver-cell damage and the increase in fat in the liver can be reversible if the drinker abstains from alcohol for long enough. But longterm damage to the liver resulting from daily consumption of alcohol over the years can be irreversible. Persistent drinking can also be a precursor not only to specific diseases of the liver such as cirrhosis, but also to other toxic conditions in the body.

Next to the skin, your liver is your body’s largest organ. In many ways it is also the most important. One could, for instance, live without a stomach if necessary but never without a liver. It is the body’s chemical purifier, performing more than five hundred different functions, many concerned with detoxifying the system from all the drugs, pollutants, and poisons you take in every day, including alcohol. If the liver is overworked or worn out by excess alcohol consumption, eventually and unavoidably your whole body suffers. Biochemists used to believe that excess alcohol was no more damaging to the liver than too much sugar or too much fat in the diet; that the real damage to the liver came only from malnutrition. But these theories have been disproved. Both the quantity of alcohol you drink and the duration of time over which you drink it are important factors in determining liver damage.

Because the liver is responsible either directly or indirectly for controlling levels of many hormones in a woman’s body (particularly estrogen), when liver damage occurs as the result of a diet too high in fats or of drug taking or long-term alcoholic consumption, the endocrine balance can be severely upset, leading not only to disruption of the menstrual cycle but also indirectly to feelings of depression, anxiety, and chronic fatigue.

These troubles may have another cause, also related to alcohol. In order to metabolize alcohol, your body calls on its reserve of many B- complex vitamins which act as coenzymes in the process. When one eats foods containing natural concentrations of carbohydrates or sugar, such as grains and fruits, the B-complex vitamins necessary for their proper digestion and assimilation are provided by nature in the foods themselves. But the B-complex vitamins have been discarded in the processing of highly refined sugars and alcohol. So the body’s own reserves can easily get depleted when you drink alcohol and eat refined sugars. Results of this depletion are many, the most common of which can be fatigue, a craving for more alcohol or sweets, or diverse emotional complaints from severe premenstrual tension to simple feelings of chronic misery.

These are just some of the reasons why the Lifestyle Diet excludes alcohol in quantities of more than a glass of wine a day. This may seem like a tremendous sacrifice to you if you are used to taking a great deal more, but once you eliminate stimulants such as coffee, tea, and alcohol from your life and begin to experience the enormous sense of well-being that comes with the low fat, low protein, complex carbohydrate diet (and all the other important things that also go with discovering and expressing your potentials mentally and physically, such as deep relaxation and exercise), you will never miss it.

Quality Test – MSI Afterburner’s MJPEG Implementation (Part I) with Hitman: Absolution (Ultra Settings, 1080p)

Update: Added screenshot example of the RTV1 codec ‘color banding’ issue, with circled areas¹**
Update: Added Quality Test Comparison (Four 1080p samples of Hitman:Absolution) at different Quality Settings²**

Recording with the MJPEG (Motion JPEG) codec, every frame is an independent ‘Keyframe ‘or ‘I-Frame’ (short for “Information Frame”), which means it is a type of frame that can be ‘cut’ or started from in video editing programs (technically, every frame is a JPG picture!). This also allows for faster seeking and rendering in editing applications. MJPEG also requires less overhead (better performance/less ‘lag’ while recording) than many codecs. As well, the audio captured is PCM (“Uncompressed”) with MSI’s Afterburner, which means that any video editor should be able to recognize the sound data. Errors in programs like Virtualdub saying “Error initializing audio stream decompression” or Sony’s Vegas showing “Stream attributes could not be determined” will not occur and these will open the audio without associated problems.

Testing out MSI’s Afterburner as a game recorder and using the built-in MJPEG codec that comes with the program, I fired up some Hitman: Absolution, turned up everything to Ultra, captured some clips and put them together, uploaded it to YouTube, and collected some results with everyone:

This video compilation is a test of a few things:
1) Hitman: Absolution’s performance while maxed out (Ultra Settings in game Options)
2) Capture quality of MSI Afterburner and performance/lag of using it
3) H.264/AVC compression quality maintainability
4) Youtube’s quality maintainability

Recorded with:
MSI Afterburner
– v.2.3.0
– MJPEG codec, “Full Frame”, 80% quality, 30fps
– Audio automatically records into PCM (“Uncompressed”) format

Recorded Game: 
Hitman: Absolution @ 1920×1080 (1080p)
– “Ultra” settings (Preset)
– Anisotropic Filtering set to 4xAA
– “Texture Filtering Quality” set to High Quality (i.e.Off/NoFiltering) in Control Center

– “Morphological” Anti-Aliasing (MLAA) setting (AMD/ATi) set to ON
– “Surface Format Optimization” set to OFF in Control Center (AMD/ATi)

Framerate while not recording: ~31-79fps
Framerate while recording: ~28-64fps

I chose some Hitman: Absolution clips for a Quality Test because it was a good example of a recent game (at the time of this writing) that includes both fast movement/action areas on the screen, as well as slow/non-moving parts, including text. It has lots of dark and light areas, high contrast edges, particles (rain/filmgrain/sparks,etc) and tests area panning as well.
I was impressed with MSI Afterburner and it’s utilization of the MJPEG codec overall. It seems to be slightly optimized or tweaked somewhat. At 80% Quality (to be in the realm of comparison with Bandicam’s MJPEG Preset Default of ‘Quality80’), flatter/darker parts were not overly compressed – which would create excessive macroblocking and/or be too smoothed out, normally. This could be partially due to the ‘Film Grain’ effect within the game, however (seen mainly when the sky or a flat-coloured background is in view).
In other words, there was very little Gibbs Effects aka ‘Ringing’ (“mosquito noise”) around elements such as text when onscreen, and what effects were there, were ‘hidden’ somewhat by the grain effect. You had to look closely to see it, which is still pretty good for not recording in a 100% Quality setting – but again, the ‘Film Grain’ effect in this game is contributing to this ‘negative effect of the MJPEG codec’ not being as visible.

A small amount of Gibbs Effects/Mosquito Noise/Ringing can be seen around and within the UPC symbol  from this frame taken out of the original MJPEG recording. It is about as visible and even seems to be less so in the video itself, due to the “Film Grain” effect present in the game helping to hide it. Click to see Full Size

The very small amount of color banding present in the original recording was somewhat generated by the Game Engine and there is very little of it (what does occur is hidden somewhat with the film grain effect the game has).
In the recorded output, thankfully there is very little, partially because of a higher-quality setting when used and how MJPEG codec handles color dithering; color banding usually won’t be seen very much at higher bitrate/quality settings (which means low compression), but will be easily seen at lower bitrate/quality settings (which uses higher compression).
Keeping above 80% quality when recording with the MJPEG codec [I recommend recording at 90% if your system can handle it, as most games do not have the Film Grain effect present in Absolution to help hide compression artifacts, such as color banding, flat color/area macroblocks and Gibbs Effects] if you have the space, it should leave you satisfied with easily-editable captures.

²**Quality Test Comparison – Four examples of various Quality Settings (90%, 70%, 50% and 30%) when using MSI Afterburner’s MJPEG Codec in Hitman: Absolution. The differences are most apparent in the middle section, the bricks that the police officer is standing on, and the people milling around to the left of the gazebo, both areas showing colour loss (Posterization) and detail loss (Quantization), more obvious in the 30% sample (bottom). All sources were original output frame extractions from 1080p recordings.
Click to see Full size

[A quick note here that MSI Afterburner’s output/recording seems to be somewhat darker than other game recording programs. It even states this in it’s own Options, “captured video may appear darker than you see it while gaming” and offers a checkbox that will apply Gamma Correction. Since this article is more about MSI’s MJPEG optimization and utilization (performance and ability to maintain visible quality), this ‘darker recording’ will be explored further in a future Game Recorder Comparison article]

For people trying out any game recording software and finding your recordings are choppy/laggy on playback (that is, when you are looking at the generated/recorded file), you should find that if you use a player/viewer that has Acceleration (GPU, videocard, DirectX processing), it should play back much more smoothly. If your system does not have this option, you can also try converting what is captured to another file temporarily, one with a smaller bitrate/size, and you should then find it will play back that converted file just fine (especially when recording with lossless/high-bitrate codecs).



It was interesting to do some side recording with Afterburner’s included RTV1 codec as well*
The Riva Tuner Video codec is an iteration related to older codecs such as Indeo Video and S3TC compression techniques. It is similar to MJPEG and it seems to have very little effect on performance while recording – even performing slightly better than MJPEG at times, which was a nice surprise. Unfortunately, it suffers from ‘color banding’ (Color Quantization/Posterization) and the result is apparent lower quality, even at high bitrate/quality settings. Although it may not be as obvious in the below comparisons (depending on the settings of your monitor/colors/brightness), and while it certainly does not ‘destroy the quality overall’ in the game recording, in the captured video the color banding can be very distracting, especially when it includes motion through the color and light changes in an area as you move through it [it may not be to everyone, of course]. The size of the file produced is quite a bit larger than when recording with the MJPEG codec as well, but more on that in a future article..

*As this article is mainly a Test of Afterburner’s usage of the MJPEG codec, a future Game Recorder Comparison article will include the RTV1 codec found in MSI’s Afterburner and cover it in more detail than here

¹**An example of the RTV1 codec’s problem with Color Quantization (‘color banding’). This frame is extracted directly from a 100% Quality RTV1 codec recording (Batman: Arkham City Benchmark @ 1080p). The areas that contain the most obvious color banding problem have been highlighted with green circles.

If you are having problems with Color Banding that is not in the game itself, try to use a higher-bitrate setting (higher quality) for the codec you are recording with, resulting in lower compression and lowered loss of details, if you can do so.
[With the RTV1 codec, it appears that it will still remain a little, no matter what…]


Getting back to MJPEG testing with Afterburner, framerate was maintained close to non-recording performance (at ~30-60+fps for this game) when recording. I usually used MSI’s Afterburner only as a monitor/controller for the videocards installed and captured with another program such as FRAPS or Bandicam. Using MSI Afterburner alone and having to run one less application in the background to capture no doubt had at least some sort of streamlining affect on performance. It felt that way, slightly.

Clear, crisp textures can be seen in this frame taken from the original MJPEG capture.
MSI’s Afterburner and it’s utilization of the MJPEG codec seems to be even slightly superior to Bandicam’s implementation of it. [Hmm..something that must soon be tested!]
Click to see Full Size

The Average bitrate of the original MJPEG captures was about 30Mbps up to 70Mbps, which meant a writing stream to the disk of up to 8MB/s, which almost any hard drive can handle (recorded onto a drive capable of 150MB/s at the time).
The original generated recording files were about twice the bitrate and size of the final MPEG-4 compressed file uploaded to YouTube, the final file weighing in at about 600MB with a bitstream of 25Mbps on average (it is assumed that almost everyone will compress recorded material into a final output video compilation file of 8-20Mbps or so, for uploading to YouTube/Vimeo/etc (Blu-Ray’s standard bitrate is 36Mbps and most video editing application presets go up to 20Mbps by default).
This final utilized bitrate, with the efficiency of H.264/AVC, manages to keep most of the detail that was in the original MJPEG recordings, although sadly, most of the finer detail is lost after uploading, as can be seen in the screenshot comparison below:

Originally used in an earlier article testing out MJPEG on Diablo3 with Bandicam, this screenshot shows examples of the detail loss after uploading to YouTube, when the video is played back at 1080p and 720p. Click to see Full Size 

What was more disappointing was that YouTube feels the need to overly re-compress uploads. Much of the quality is lost, especially things like the film grain, one of the ‘first things to go’ in temporal video recompression. For instance, at 1:03-1:08 there is visible grain effect maintained in the settings I chose for the final compressed output file, keeping most of the grain from the original MJPEG recording from Afterburner. In the YouTube Video Player after uploading, it can be seen that much of that grain is lost. Another example of this is the dense cornfield against the much flatter sky textures at 1:30-1:36. I kept the complexity of the cornstalks and hard contrasts of the plant details versus the sky on purpose, yet after YouTube’s recompressing of the video, the result is blurred and smoothed details that were not like that in the recorded MJPEG video or the final H.264/AVC high-quality video output/final compress. I will attempt other uploads of the data at various settings for experimentation and put it just below this paragraph when an upload does not lose much of the finer details I wish to share**. I understand they must do it to save space (no doubt people upload huge, ‘FRAPS-original’ size files and recordings sometimes), it is merely unfortunate. At least it then becomes an example of what happens to some of the quality and detail once uploaded to YouTube (the extracted frame above, for example, is from the original MJPEG recording produced by Afterburner). There seems to be no use, at this time, to attempt to upload extremely high quality/fine detail. 

 The file originally uploaded to YouTube, the results of the MSI/MJPEG Quality Test, was previously compressed with a bitrate of 25Mbps. While this bitrate, using high-quality H.264/AVC codec settings, was enough to maintain details such as Film Grain and high contrast edges, much of this detail was lost after YouTube recompressed the uploaded file. 

**Another, higher-bitrate excerpt [in an attempt to compensate for YouTube’s recompression] of the original MSI/MJPEG video capture:

This video then, is an attempt to compensate for YouTube’s recompression and data loss, by uploading a video stream with a very high bitrate (an average of 60Mbps, up to 80Mbps, higher even than the original recorded data). As such, the duration is much smaller, a mere excerpt of the original intended upload.

Result: Even when a video stream is uploaded with the much higher bitrate, even when the original captured file is uploaded, even when I rendered the capture to a 2160p (4K UltraHD) file and uploaded that to YouTube, YouTube’s recompression of the uploaded material (while still watchable) loses far too much detail from the actual upload – at least for high-detail evaluation of a game recorder’s produced video streams. This is unfortunate. For now then, I will try to always show frames (screenshots) extracted from the original captured files created by game recording applications in Quality Tests…

Turning up the Recording Quality setting to 100%, the bitrate for MJPEG jumps up to over 275Mbps (over 30MB a second of file size being written to the drive). Quite a jump – and at that bitrate, the size becomes comparable to a YUV codec (or a FRAPS 1080p half-size recording) easily – but the quality ramps up as well. Color dithering and loss of detail is surprisingly near-negligible at 100% Quality with this game, yet the resource demand for using the MJPEG codec [especially MSI’s optimization of it] seems to remain small, as MJPEG was already a lightweight codec with somewhat smaller processing being done, to begin with. Today’s powerful videocards and CPU’s should be capable of pumping out a sequence of lightly compressed JPEG’s in a single file [no pun intended] without breaking a sweat. As long as your system isn’t chugging along already, adding some MJPEG capturing shouldn’t affect it very much. For those of you with slightly older systems with trouble recording in other codecs, give MJPEG a try, it should record smoother for you.

Overall, well done MSI.  /clap

If anyone is looking for a completely free Game Recording program (it might have even come on a disc with your videocard, as mine did) look no further than MSI’s Afterburner. Keeping the settings relatively high [especially with the MJPEG codec, to keep compression artifacts low] and/or doing your own tests to see what looks ‘good enough’ for you, I suspect many people will be happy (if you aren’t already) with using Afterburner and the low-resource-demanding and editing-friendly MJPEG codec to record your gaming adventures.

Please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – do a few short tests and use what you prefer.

Have fun recording with MSI Afterburner and the MJPEG codec – and See you in the games!




[Note: As noted throughout this article, this testing of MJPEG with Hitman:Absolution alone is not a full test of MJPEG quality maintenance potential, as this game utilizes a “Film Grain” effect, which hides some of MJPEG’s weaknesses in maintaining Quality. In a future post (Part II), a more in-depth examination of MJPEG as a video game recording codec, using other games and utilities, will be actualized. See you then!]

The Best Text for Teaching How to Write and Revise Leads

My fourth graders hate revision. They’re often offended by the mere suggestion that they hadn’t nailed the perfect lead to their stories in their first draft.

I’m used to this. I see it every year in writer’s workshop, especially at the beginning of the year when we’re writing in a genre for the first time.

And every time I see this, I become more determined to break them of this thinking.

Today, we were working on the Common Core State Standard W.4.3a – Orient the reader by establishing a situation and introducing a narrator and/or characters; organize an event sequence that unfolds naturally.

My favorite story to use for this is standard — especially with fourth graders — is The Teacher’s Funeral by Richard Peck.

This book, set in a small Indiana town with a one-room schoolhouse, has the best opening line of a children’s book ever.

If your teacher has to die, August isn’t a bad time of year for it. 

Richard Peck keeps it going from there, building an incredible introduction. You can read the entire first chapter here.

Today, I started our writing lesson by reading this chapter to them. I have the Kindle edition of the book, so when I read it, I can project it on our ActivBoard so the students can follow along as I read. They laughed throughout the intro and were immediately hooked, begging me to choose this as our next chapter book read-aloud. Score one for the objective of “hooking your readers!”

I then asked them how many of them thought that introduction was the one that was in the first draft of his book.

One or two hands went up.

Richard Peck shared in an article called “In the Beginning” (Horn Book Magazine, September 2006, pp. 505-508) that it normally takes him 24 drafts of his lead before he’s happy with it. TWENTY-FOUR!

And here I’m asking my students to take a second pass at their writing.

I shared that little nugget with my students before we reread the first chapter. As we read if for a second time, we focused on the characteristics of his writing that made it such a great lead.

Here’s what my students noticed, compiled into an anchor chart:

Once we finished the chart, I had them go back to a piece of writing they’ve been working on and try to write a different introduction. Some students tried changing the point of view, others jumped into the action or started with dialogue. Whatever the strategy, all of them managed to produce a new version of their introduction, and all were at least a little better than what they’d started with.

We’ll get this revising thing down eventually…

What are some of your favorite books to use to teach students how to hook their readers? I’d love to hear about them in the comments!

good representation of the concepts

10 TIPS TO DECORATE KIDS BATHROOMS

Teach young children the fundamentals of responsibility bathroom can be a challenge. From potty training to control the way you brush your teeth, bathroom children should be a place of inspiration and pleasure for them to learn and grow. Child bathroom decoration can borrow design elements of your room. With color, the creative organization, and areas designed exclusively for little hands and creative minds, here are 10 tips to decorate their bathrooms. Depending on the age of your children, follow these tips to design your age in mind. For young children, bright primary colors are inspiring, and for older children feel more mature palette of neutrals and pastels.

KID’S BATHROOM DESIGN

KID’S BATHROOM DESIGN

1) Create a colorful background: Although most of the plumbing fixtures remain in neutral shades of white, bone or brown, it is essential to their subject is colorful and fun. Consider painting the vanity, wall, wallpaper, stenciling and playful lyrics on the walls. Be careful when you use the stickers that moisture in the bathroom can lead them to ignore good.

2) Keep the walls with clean surfaces sustainable: When decorating a child’s bathroom, especially around wet areas such as toilets, sink and bathtub, make sure the surfaces are easy to clean and durable. ceramic wall tile, wall painting wainscoting panels are washable and ideal.

3) Provide adequate lighting. This advice applies to any bathroom! You do not have dark areas in the bathroom. In terms of cleaning and a bit to see what they do. Bathrooms for children are a priority area of ​​injury, as wall lighting, overhead ambient lighting, ceiling lights and even in the vanity are clear and are not shadows.

4) the organization is the key to learning, children’s room when decorating a child to remember to put the bathroom easy to find areas of the organization, and easy to reach new heights. Vanity sank in open shelves under the bath toy suction cup holders and bins hygiene products to help children to keep the bathroom clean and tidy.

5) Small furniture a little ‘small: Believe it or not is a fitting suitable for babies and small children. There are different estimates for lower mobile is a good lesson for children how to use the toilet. Regardless of the customer, when planning your baby’s bath, to know the options are there for the growing child.

6) to accessorize on a budget: You can spend a fortune to decorate the bathroom of your children also understand that a simple color palette of coordinated accessories that are affordable, can give an overly great! From color-coordinated towels, rugs, shower curtains and hygiene products, operators can combine colors and patterns and decorations.

DECORATING KID’S BATHROOM

DECORATING KID’S BATHROOM

7) The theme of the election: if you are at a loss how to decorate your bathroom kids, consider to choose a theme they have. Derived from animals, sports and entertainment activities to spend time with their favorite cartoon characters and favorite color, the options are endless. If a child is old enough to ask them their opinion on how they would like to decorate your bathroom.

8) Bathroom safety: Make sure the bathrooms have the proper procedures instilled in interior design. Even though a beautiful crystal vanity knobs cabinetry might be nice to see, if not secured properly can be dangerous for children. Make sure all the furniture, harmful chemicals, and decorative elements are not easy for children.

9) Update bathrooms of a teenager: For older children and adolescents want to want to accessorize and color coordinated decor may not be as strong. Instead, opt for temporary accessory that can change depending on your mood teenager! colored towels, rugs can coordinate a work of art hanging on the wall all have their own bathroom needs to make your teen feel comfortable in their space.

10) Keep it simple: It ‘s easy to wrap decorate any room in your home. Remember to have fun when decorating your bathroom children, and to seek inspiration from blogs, interior design magazines and shops to visit in local dishes. Many stores offer “instant bathroom furniture for you. combinations of color coordinated accessories, you can mix and match. No thought required!

Bring together elements to your bathroom decor kids can be fun and easy to use these 10 tips. Consider your child’s age when decorating, as well as a way of life. If you are a busy parent who does not have time to clean the bathroom with lots of toys to keep open the basket and quick cleaning areas. Remember that you are teaching and inspiring children to enjoy swimming and creative learning.

LUXURY DECORATING KID’S BATHROOM

LUXURY DECORATING KID’S BATHROOM

And More: Deals and Sales – 2014 Summer Super Sales

Just to let more people know, in case some didn’t already, there are a lot of great Summer Sales going on right now at various game distribution/retailer websites [think of them as ‘Winter Wonder Sales’ if you are in the Southern Hemisphere]. Here are a couple samples:

Good Old Games, now called GOG.com, have both ongoing sales and Time Limited Deals, with games such as The Hitman Series, Simcity2000, the Baldur’s Gate and Icewind Dale series, the Might & Magic series, the Wing Commander series, Quest For Glory and King’s Quest series, the Rollercoaster Tycoon series, and much more
(Click to see Full Size)

Steam is having it’s Summer Sale, that also has some ongoing deals with some Time Limited Sales, with games such as The Witcher series, Euro Truck Simulator series, the Left 4 Dead series, the Total War series of games, Red Alert 3, Civilization 5, and much more
(Click to see Full Size)
Some of these are Time Limited Deals, meaning that they are only ‘on’ for a few hours, or change after a few hours – so check back there once in a while and see if any games you have been waiting for are on sale – most of these are 80% or 90% off!
[For the most part, they seem to ‘stay’ on sale/remain on sale, but at a slightly higher sale price than within the ‘time limit’ (but are still available at less than regular price)]
I hope you find something you like and See You In The Games!

Taking pills and supplements

Pills and supplements both have their uses, but only in moderation and only as long as strict guidelines are followed.

Over-the-counter (OTC) diet pills

The 1991/2 Weight Loss Practices Survey, sponsored by the US Food and Drug Administration (FDA) and the National Heart, Lung and Blood Institute, found that 5 per cent of women and 2 per cent of men trying to loseweight use diet pills. Products considered by the FDA to be OTC weight- control drugs are primarily those containing the active ingredient phenylpropanolamine (PPA), such as Dexatrim and Acutrim. PPA is available over the counter for weight control in a 75mg controlled-release-dosage form. The medicine should be used in combination with a restricted diet and exercise.

Diet Start

Using diet pills containing PPA will not make a big difference in the rate of weight loss, says Robert Sherman of the FDA’s Office of OTC Drug Evaluation. ‘Even the best studies show only about a half pound (250g) greater weight loss per week using PPA combined with diet and exercise,’ he adds. Sherman cautions that the recommended dosage of these pills should not be exceeded because of the risk of possible adverse effects, such as raised blood pressure and heart palpitations.

Supplements

To rely on taking pills as a way of supplying nutrients is not ideal, for in a perfect world such nutrients should come from our food. But when you consider the quality of some of our food — fruit and vegetables grown in mineral-depleted soil, picked before they have ripened and shipped over vast distances in refrigeration, then put into long-term storage; meat full of hormones; grains stripped of most of their nutritional content — then taking a good multivitamin supplement and possibly extra vitamin C can benefit most people. And while you are trying to balance your blood-sugar levels, reduce body fat and rebuild lean muscle tissue, there are a few supplements that may help.

Key supplements

Magnesium

A fundamentally important mineral that counters insulin resistance.

It is hugely deficient in the Western diet. Consider taking 230-600mg per day, unless you have suffered kidney failure or have a high degree of AV heart block.

Quercetin

A flavonoid with powerful anti-inflammatory properties that helpsto control high insulin levels and inhibit fat production. Take 200-400mg three times a day before meals.

Omega-3 fats

If you don’t eat fish, take 1,000-3,000mg of fish oil daily in capsule form. Vegetarians can use flaxseed oil or crushed flaxseeds instead of fish oil capsules. Try flaxseed oil in salad dressings (or even in smoothies) to ensure you get enough of this health-enhancing fat.

Chromium

A trace element that plays an important role in carbohydratemetabolism and regulating blood-sugar levels. It has proved useful in treating diabetes and shown to be effective in encouraging the body to lose fat, not muscle, when dieting. Take 400-600mcg of chromium picolinate or chromiumpolynicotinate a day.

Lcarnitine

Used extensively by athletes to ensure maximum performance inendurance or aerobic sports. It is also useful for weight loss because it is involved in burning fat in muscle cells. Take 1,000-3,000mg per day.

DIETARY MYTH

Myth: I will get quicker results if I use diet pills.

Fact: there are no shortcuts — no magic pills. Losing weight sensibly and safely requires a multifaceted approach that includes setting reasonable weight-loss goals, changing eating habits and getting adequate exercise. Appetite suppressants (diet pills) may help some people in the short term, but they are not a substitute for adopting healthy eating habits in the long term.

My trip to Vietnam Cont….

I finished the organization capacity assessment of the 5 local civil society organizations (NGOs) in Vietnam. They are all working or trying to work in a “rights” based approach. The main services of these local NGOs are focused towards marginalized groups, ethnic groups etc. However this is not what the Government wants; they prefer them to work on a needs based approach.

They have therefore come up with a way to allow such organizations to work on a slightly different rights based approach. However this is a structured method which can be monitored by the Government. This is how it is set up:

All international non governmental organizations (INGOs) have to be registered with the ministry of foreign affairs under “VUFO” – Vietnam Union of Friendship Organization. VUFO is the organization which deals with the administration of INGO policy and compliance as it were. Under VUFO they have what is known as the NGO Resource Center which deals with some operational issues as well as help set up working groups under thematic areas. (E.G: HIV AIDS, Gender, LGBT etc.)

All/most (there can be exceptions) rights based local non governmental organizations are registered under “VUSTA” – Vietnam Union of Science & Technology. VUSTA is the organization which deals with the administration of local NGO policy, compliance and deals with the operational issues as well as help set up working groups for thematic areas.

Both types of working groups in theory are independent; however they can have representatives from ministries, other government agencies, communist party advocacy committee etc. in addition to like minded NGOs and INGOs.

Through these working groups research based policy alternatives (advocacy and lobby for rights based services & opportunities) are submitted to each relevant ministries. This is then passed on to the cabinet of ministers. Based on the agenda of the National Assembly cabinet may submit these policy alternatives to the assembly who may or may not approve, amend or adopt these policies. It sound quite easy but in practice this is a long process.

Many organizations do not have long term resources to sustain this type of process. However based on authority levels at different levels/branches of the government some organizations are able to get the corporation of the government to deliver right based services themselves or through quasi government agencies.

The “local NGO” in general is a relatively new phenomenon in Vietnam. They tend to be small and with low capacity. They have the potential to play a key role in delivering services to special interest groups and ethnic minorities in Vietnam. There are some clear examples where the government has allowed the use of this method effectively in isolated cases.

There is a significant difference to how international & local NGOs operate in Vietnam, Lao, Cambodia, China, Mongolia & Myanmar. They have learned to operate within the service gaps of these socialistic countries and they are beginning to get noticed for the excellent work done, by their governments and civil society in general. However, they too face some of the most common issues such as resource mobilization, retention of staff, planning, budgeting, monitoring etc. faced by NGOs the world over.

Now about Hanoi; it is indeed a busy city and one that is growing rapidly I really like visiting Hanoi and the friendliness of the people of Vietnam. I visited most of my favorite cafes and bars which I patronized on my previous travels to Hanoi. Everywhere you look you see construction sites (Except central Hanoi) these buildings are mixed developments like what you saw in Dubai several years ago. They are still to go in for developments such as Dubai Marina, Dubai International Financial District; I counted over 40 cranes on the drive from the airport to my hotel. They do not seem to be affected as much as the others in terms of the global financial crisis.

Walking through the streets of Hanoi I noticed something unique to Vietnam (I think). Most of the Hanoi streets are dotted with Café’s and restaurants. With the vast majority of the Vietnamese using motorbikes for travel, each one of the establishments have something resembling a valet parking for those patrons arriving at the establishment in their motorbikes. The parking attendants use a white chalk to mark on the seat of the motorbike the number of bikes parked in the day / rider / owner / and parking sequence. When patrons leave the parking attendants starts moving the motorbikes closer to the entrance (perhaps for tips) and it is done on a continues basis. I was fascinated by this as my experience in other parts of the world is that they put up a huge sign saying that parking is at your own risk; and they are only interested in what you spend at the establishment and keen to get you out as soon as they can so that another patron can be served. Hope this continues in the future as well.

I will be flying home tomorrow and will prepare for 3 more assignments which have simultaneous time lines. Organization Capacity Assessment of research & policy advice organization in South Asia, Organization Capacity Assessment of 5 local NGOs in Indonesia. Organization Capacity Assessment of 4 branch offices in the east of Sri Lanka.

Paperless Mission #10: Distributing Student Assignments

This is the tenth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

 

Mission #10: Distribute Student Assignments through Shared Folders

Once my students had their iPads, I needed to figure out a way to get their work out to them. At first I tried using Edmodo, but that proved to be a bit glitchy for assignments where I wanted students to work with the materials in a different app like GoodReader. I needed to figure out an easy to manage workaround. Welcome back, Dropbox!
To do this, I created a new folder on Dropbox called “Student Assignments.” I then right-clicked on the folder to pull up the option to “share link.”
This pulls up a new window that shows the internal content of the folder in the background. Here, you could enter in a bunch of email addresses, but I prefer to click on “Get link.” This copies a link to your clipboard for you to paste somewhere else.
Once I had the link to the folder, I put it in a highly visible spot on my class website. My students use my class website constantly, so getting to the link was easy for them once they knew where to find it. 
Once the folder was shared, I started to create the internal contents of the folder. I created 6 folders inside — one for each day of the week and an archive folder. 
I numbered the days of the week to control the order of the files. Dropbox will alphabetize the folders otherwise.
As I gather resources or assignments that I want students to access, I save them as pdf files and I just put them in the folder to match the day that I expect them to do the assignment. At the end of the week, I move everything into the Archive folder, and I start over creating the assignments for next week. 
This system has worked incredibly well for me! Here’s why:
  • Items in Dropbox sync immediately, so if we’re in the middle of working on something and I realize that I’ve forgotten to give students something that would be helpful, I can just drag it into the folder. I don’t have to sprint down to the copier. 
  • It’s the ultimate organizer for absent students. If a kid misses class on Tuesday, they (and their parents) know to go to the Tuesday folder to see what assignments are there. There’s no more worrying about lost papers or assignments.
  • The archive folder provides a great back-up for lost work. If a parent can’t find a reading or a study guide to help before a test, there’s an easy place to go to see all of the work.
  • It only requires a one-time set-up. Since I’m sharing the external folder and not the individual folders or assignments, I can change out what’s inside the folder without having to get a new link to share. 
  • It doesn’t require any log-ins or sign-ups from my students. They don’t have email yet, and they don’t have Dropbox accounts of their own, but that doesn’t matter. Accessing shared files on Dropbox doesn’t require a log-in of any sort. 

I’ve been incredibly happy with this system. Everything that I would have copied in the past has been easily distributed through my shared folder in Dropbox. 

What are some other ways you could use shared folders in Dropbox? I’d love to hear your ideas in the comments.

5 Reasons to Flip Your Math Class

Of all the subjects, math is probably my favorite to teach. But it is definitely not easy. By the time students are in fourth grade, there’s often a wide range of abilities. Last year, I had students who could barely add and subtract and others who were working well beyond grade level. Trying to design lessons that worked for them was a real challenge. If I moved too quickly through the lesson, several students would get lost. If I moved too slowly, others would get bored and start causing different problems.

Then I attended the Georgia Educational Technology Conference and heard some sessions about flipped teaching, and a lightbulb went off.

If you’re not already familiar with flipped teaching, the idea is that we need to “flip” the traditional way we teach — lesson at school, practice problems at home as homework. Instead, students should watch a short video lesson as homework to prepare for class, and then the majority of class time is spent working on practice and application while I’m there to guide them.

I did this pretty consistently for the second half of the year, and I couldn’t be happier with the results. There were so many advantages.

1. Students became more confident.

For some kids, math can be intimidating. Everyone works at different speeds. What may be an obvious concept for one kid may take multiple explanations for another. There’s lots of vocabulary and room for mistakes, and when you feel like other kids are getting it faster than you, your confidence suffers.

All of this went away when I flipped.

Students were watching the videos at home on their own. No one knew whether they needed to replay something a couple of times until they got it. No one knew that they had to pause the video for 5 minutes to try a problem that others would have solved in 30 seconds. They could all work at their own pace, and they came to class more confident and prepared for practice the following day. The attitude shift in my students this year was reason enough for me to continue flipping.

2. Parents were less stressed.

There have been so many times when I’ve heard parents complain about math or express their discomfort in helping their child because they weren’t taught math the way we teach it now. And I get that. I remember thinking in my math methods courses that I could have been great at math if someone had explained it to me better as a child rather than having me memorize algorithms.

Having the flipped model created allies from a lot of math-hating parents. Some would watch the videos along with their children and have those lightbulb moments where concepts and strategies would suddenly make sense. Others expressed a sense of relief that they didn’t have to worry about “undoing” the things we were doing in the classroom by just jumping to the standard algorithms. We were all more comfortable with the math.

3. I had more time to see what students could actually do.

While I always tried to keep my in-class mini-lessons short, there were days when they would drag on because some kids just weren’t getting it. By the time I felt confident they could try some problems on their own, we hardly had any time left. And by the time they got home to do it as homework, they’d forgotten what we’d spent the morning talking about, so they were back to square one.

Now that I’ve flipped, I only need 5-10 minutes maximum at the beginning of my math block to do anything whole group. I spend that time answering questions, clarifying any misconceptions, and checking the 1-2 practice problems that I typically include at the end of the video. The rest of my math block was then spent working with small groups, conferring with kids, and getting into richer practice and problem solving than I could ever fit in before.

I also didn’t have to worry about students getting the right answers only when their parents “helped” them. When it came time for assessments, I had a much better sense of where my students were at and what to expect from them because I was more deeply involved in their learning.

4. I didn’t have to worry when we had a sub. 

In the past, I would write off sub days as lost instructional time when it came to math. Now that I’ve flipped, that is no longer the case. I include a link to the video I’ve created in my sub plans, and I have the sub watch the video with the class again to start the lesson. Usually that gives the sub enough background knowledge to help with the learning task, and my students have enough scaffolding from my instruction that they can work through the practice. It made those lost days so much more productive.

This year, I will be on maternity leave for 12 weeks, so I’m nervous about what will happen with my kids while I’m gone. But I’m less nervous about the math because I already have videos made for most of those lessons from last year. My students will have continuity in math instruction because of it.

5. Students were more successful and could tackle bigger challenges.

Last year was my best year ever as far as student performance on end-of-year assessments and benchmarks. I think a big part of that can be attributed to the move toward a flipped model for math. My students had more time and confidence to master the fourth grade standards, and as a result, I was easily able to push them into bigger challenges. When I surveyed the students mid-year about the flipped model, their responses were overwhelmingly positive in support of it, and I knew it was something I need to continue in the years ahead.

Next Steps

This will be the first year that I use the flipped model for the whole year, so I will need to prepare more video lessons and give some thought to how I’ll transition my students (and their parents) toward this model. In the weeks ahead, I plan to share more about the tools I use to create flipped lessons and some troubleshooting tips for problems that might come up.

Now that I have some experience flipping, I’m going to go back and reread Flip Your Classroom: Reach Every Student in Every Class Every Day by Jonathan Bergmann and Aaron Sams. Jon was one of the speakers I saw at GaETC, and he’s one of the founders of the flipped classroom movement. I read the book quickly as I started to flip, but I think there are more ideas to be pulled from it.

I’m also starting to think about other areas where I could flip instruction. One possibility might be some of the grammar, vocabulary, and word study components of my ELA block. I consistently struggle to fit everything in to that time, and flipping might be the answer. I’ve downloaded the book Flipping Your English Class to Reach All Learners: Strategies and Lesson Plans by Troy Cockrum, and I’m hoping that will give me some more inspiration.

Have you tried flipping any parts of your instruction? I’d love to hear more about your ideas and experiences in the comments!

The trip to Hyderabad India

I am starting my next assignment on the 3rd of October 2009 in Hyderabad India. This will be my 4th trip to India in the last 2 years. Going to india is a funny thing for me as I cant wait to get there. Once I am there I get the feeling that I need to get back home (Sri Lanka) soon.

I have applied for my visa nd waiting to collect it. will do it tomorrow.

July Currently

How did it get to be July already?!?!

I’m still recovering from 3 days of EdTech awesomeness at the ISTE conference and linking up with Farley at Oh’ Boy 4th Grade for this month’s currently.

Listening – My two-year-old has recently become obsessed with Sofia the First on Disney Jr. It’s a cute show, but not my favorite of the toddler choices…not that I’ve become a connoisseur of toddler TV or anything…

Loving – I started a garden last summer, but it became somewhat overgrown when Georgia had its monsoon season last summer, and it didn’t turn out as well as I’d hoped. This year, we’re in a new house, and while I don’t have the yard space (or HOA permission) for a full garden, I have space on my deck for a container garden. I’m growing bell peppers, jalapeno peppers, herbs, tomatoes, squash, cucumbers, and carrots, and they’re really coming along! My daughter and I check on them every afternoon, so it has become a fun summer project.

Thinking – This was my first year to attend ISTE, and I learned SO much. It was overwhelming, exhausting, and inspiring, and I just need a little time to process it all. I’ll start blogging tomorrow about some of the coolest stuff I learned.

Wanting – I’m moving into a new classroom this year, so I had to box up all of my stuff at the end of the school year. I’m hoping (*fingers crossed*) that it all got moved to the new room (in a different building on our campus) so I can begin unpacking soon.

Needing – I’m a little panicked that it’s July already. I have a lot of projects that are in various stages of completion, and while I know better than to think I’ll get them all done, I’d like to check a few more items off my list before I go back to school in a few weeks.

4th Plans – I’m looking forward to a three day weekend with my husband and daughter. We don’t have any big plans, but we may take Sydney to see her first fireworks extravaganza.

On a final note, as I prepare to move into my new classroom, I’m starting to think about decorating. The wall colors are very different in my new room, so my old stuff might not work. Here’s a quick pic of the new room from my Instagram account:

I’d love to hear your color schemes/decorating ideas if you have any! The move-in and shopping spree will start next week!

Have a great weekend!

Foam Rolling aka Self Myo-Fascial Release

Using a tubular foam roller to literally roll over tight areas of muscles and tendons is known as “Myo-Fascial Release”.    While it seems counter-intuitive applying steady pressure to muscles and tendons with an emphasis on trigger points (areas of tightness and soreness) has been proven to be a highly effective method for improving mobility.    
Since you are in complete control of the amount of pressure applied and how long it is applied you can customize the experience based on your level of sensitivity.   Key areas to focus on include the hamstrings, calves, gluteal muscles, latissimus dorsi muscle, and even low back and hip flexors if done with caution.
You can use a tubular foam roller, and they are made in varying levels of firmness from soft to very firm.   In addition, there are variations that include a textured surface of varying levels from small to large finger like projections.  You can also use balls such as a lacrosse ball, baseball, or tennis ball in a similar fashion.     NOTE:  the smaller and firmer the object the more pressure it will tend to apply so proceed cautiously.
The technique is to position the foam roller on the floor (on a firm but not hard surface is best).  Then position the muscle/s you are targeting on top of the foam roller.     For example, for the calf sit on the floor with your target leg extended so that it is on top of the foam roller with the lowest portion of the calf on top of the roller.    
Use your hands to lift your butt slightly off the floor to allow you to apply pressure down onto the foam roller.    Then literally roll forward slowly over the foam roller paying attention to any trigger points where you notice sensitivity or tightness.   
When you find a sensitive area slowly roll back and forth on the spot until you feel it release.   With a little experimentation you will learn how much pressure and speed work best for your physiology. 
Self Myo-Fascial Release/Foam Rolling is a great way to start a workout and does a great job of safely improving mobility before a workout and is also great to do between workouts.
Contraindications to Foam Rolling
Pregnancy – during pregnancy ligaments become lax and pressure anywhere on or near the abdomen is to be avoided at all costs so best to skip foam rolling when pregnant.
Osteoporosis – soft bones and additional pressure are not a good combination so best to avoid foam rolling without a physician’s permission if you have moderate to severe osteoporosis.
Intervertebral Disc Issues – anyone with disc problems in their spine should be cautious with foam rolling because pressure in the wrong areas can create problems so again get guidance from a medical professional if you have an disc issues in your spine.
Inability to support bodyweight on arms or legs – foam rolling cannot be done safely if a person lacks the strength to support their bodyweight on their arms and/or legs.
For a pictorial guide of various foam rolling exercises to target specific body parts click here:   https://www.pinterest.com/explore/foam-rolling/  

How to Optimize the Benefits of Vitamin D Supplementation

Vitamin D is constantly in the news lately and for good reason.    Optimal levels of Vitamin D have been linked to a host of benefits including prevention and treatment of many key diseases ranging from Osteoporosis to improved heart health with reduction in heart attack risk to prevention of many different types of cancer.
The ideal way to get optimal levels of Vitamin D is to let your body create it through Safe Sun Exposure (see previous blog on this subject here:  http://workoutanytime.blogspot.com/2016/08/the-facts-on-safe-sun-exposure-and.html  However this is easier said then done, and too much sun is clearly a strong risk factor for skin cancer!      Enter Vitamin D supplementation.
The amount and form of Vitamin D supplementation has changed substantially based on lots of emerging research.    The form that should be taken is Vitamin D-3 NOT D-2 form and all experts agree on this!     However when it comes to dosage things get much trickier.      The confusion comes because Vitamin D is really a powerful compound and functions as a hormone in the body.    As such it has profound impact on virtually every system in the body.    In addition you can overdose on Vitamin D supplements so more is NOT always better!
Ideally you should order a blood test and test your levels.    The test you want is called a 25(OH)D blood test and is offered by all major labs.   You can either ask your doctor to order this test for you OR you can order an in-home test.   You just prick your finger and put a drop of bloo on the enclosed paper and send back in to the labs.    You can also your own blood test online and go to a lab to have blood drawn in the same way your doctor orders the test.   For more information on testing go here:  https://www.vitamindcouncil.org/testkit/?gclid=Cj0KCQjwh_bLBRDeARIsAH4ZYEPhv0MVkO5_S7USZZ8bwVlt5A3vPWGbBFFIbJiB8Wtva0x-IDH7UmQaAlGkEALw_wcB#
Ideal versus Acceptable Blood Levels of Vitamin D

There is a big difference between what is considered “acceptable” or okay and ideal blood levels.   Here are the classifications of different blood levels of Vitamin D. according to the Vitamin D Council:
0 – 30 ng/ML is very low and considered a deficiency
30 – 39 ng/ML is better but still insufficient for optimal health and disease prevention.
40 – 100 ng/ML is optimal
Above 150 ng/ML is toxic!
The key is to test and if low take a supplement then retest 2 – 3 months after regular vitamin d use because each person is different in how much supplementation they need based on many factors including sun exposure and skin type.     The RDA for Vitamin D for infants is 400iu.    For Children 1 – 13 and adults through age 70 the RDA is 600iu and for those over 70 the RDA is 800iu.
Unfortunately, this is way too low to get many people into the sufficient much less optimal range so testing is really worthwhile.   In many cases people need 4,000 – 10,000 or more iu’s per day for at least a month to get where they need to be for optimal health!
Preventing Vitamin D Toxicity through the Co-Administration of Vitamin K-2

Like many vitamins Vitamin D has a co-factor or other vitamin that helps it perform its function better and in a more balanced fashion, and that other vitamin is Vitamin K-2 (not to be confused with K-1 found in many plants).    In an ideal world, you can get all the Vitamin K-1 you need from eating plenty of green, leafy vegetables, and your body can turn it into K-2.   Unfortunately, this conversion is lacking in many people.
More importantly K-2 is not easily toxic and can be taken with Vitamin D.    K-2 is best taken as a supplement as MK-7 version which has been heavily researched and shown to improve bone health and prevent arterial calcification which can potentially occur with too much Vitamin D.     For a more complete understanding behind how K-2 works with Vitamin D and why it is a great idea to take the MK-7 form of K-2 with Vitamin D check out this article from Dr. Mercola:   http://articles.mercola.com/sites/articles/archive/2011/03/26/the-delicate-dance-between-vitamins-d-and-k.aspx

Taking 100 – 200 mcg per day of Vitamin K-2 will help optimize the effects of Vitamin D and minimize risks associated with Vitamin D Supplementation.

Free Weekend – Overwatch and Fallout 4 [Notification]

Just a quick notification for those that didn’t know, that this weekend is a Free Weekend for two great games: Overwatch by Blizzard Entertainment and Fallout 4 by Bethesda Softworks.
To commemorate this amazing alignment of the planets that these two behemoths occupy, I created this ‘Mash-Up’ Image Header as a Reminder, which I will release as a Full-Sized Wallpaper, for fans of these two franchises, once it is complete… Soon™

A big fan of both companies’ products, I was so excited about it – but I haven’t had a chance to play yet! So, I’m trying to help out all of you fellow gamers and notify you that these games are Free and Playable all weekend – including being sold at lowered prices – but it’s almost over! Get out there and jump in – and have fun! GOGOGO

See You In The Game!

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

After a look at the pictures in this charming crib Scandinavia, we can only guess at the last, this apartment has no space. You’ll probably be surprised to know that in reality, the total area of ​​the house has a room of 44 square meters. Located Vasastan, Stockholm, this bright and comfortable studio seems to have everything: a beautiful modern design, function and a general atmosphere of welcome.

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

ALL-IN-ONE-ROOM APARTMENT DESIGN STYLE

According Alvhem Makleri & Interior, it is an opportunity that exudes peace and tranquility. The living room is a bright and social, with the opening of both kitchen and bedroom. Windows dissolves the border between the inside and provides natural light to govern. We are sure that you have already noticed alcove large enough for a king-size bed. This can be a bit flat, but the design approach used to improve inspires only the “oversized” ideas.

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

ALL-IN-ONE-ROOM APARTMENT DESIGN CONCEPT

ALL-IN-ONE-BATHROOM APARTMENT DESIGN

ALL-IN-ONE-BATHROOM APARTMENT DESIGN

ALL-IN-ONE-ROOM APARTMENT SCHEME

Fast-Track principles

This is a diet, or a way of eating, that will:

  • Lower insulin levels and stabilize blood-sugar levels
  • Banish food cravings
  • Eliminate energy peaks and troughs, and mood swings

Enhance concentration

  • Re-educate you into a way of eating that will increase your vitality and improve your overall health
  • Help your body to burn fat and normalize your weight.

It is vital that you understand the principles of this diet and follow it responsibly. If you are fundamentally healthy, but insulin-resistant and experiencing any ofthe accompanying symptoms, this plan will help you redress the balance and find a level of carbohydrate intake with which your system can cope. The Fast-Track Plan offers you a kick-start and is aimed at women with a BMI of over 35 and men with a BMI of over 25.

Diet Start

For the period of this plan you base your diet on an approximate ratio of 50 per cent high-quality protein/20 per cent low GI carbohydrates/30 per cent healthy fats. You begin the first two weeks of the diet by restricting your carbohydrate intake to 20g (3/4oz), your protein to 150g (5oz) Biological Value and healthy fats to a minimum of 40g (1 1/2oz). On a very simplistic level this means:

  • 3 cups low GI vegetables per day.
  • 1 portions of protein three times per day and portion twice per day as a
    snack. (A portion of protein is the equivalent to the size of your palm.)
  • Around a half to a whole teaspoon of allowable fats at every meal.

Within 48 hours your body will start to burn its own fat as fuel, as your body switches into benign dietary ketosis.

Ketosis

Being in ketosis means that your body burns fat because it isn’t taking in sufficient glucose to meet your energy needs. Under everyday conditions the carbohydrates that you eat are converted to glucose, which is the body’s primary source of energy. Whenever your carbohydrate intake is limited to a certain range, for a long enough period of time, your body will draw on its fat stores — turning this into a source of fuel called ketones. When you burn a larger amount of fat than is immediately needed for energy, the excess ketones are discarded in the urine.

Dietary ketosis has received a bad press because it is often confused with ketoacidosis, a life-threatening condition most often associated with insulin- deficient, type 1 diabetes.

Benign dietary ketosis, however, is a natural adjustment to the body’s reduced intake of carbohydrates, as the body shifts its primary source of energy from carbohydrates to stored fat. The presence of insulin keeps ketone production in check so that a mild beneficial ketosis is achieved. Blood-sugar levels are stabilized within a normal range and there is no breakdown of healthy muscle tissue, as long as sufficient protein is included in the diet.

Measuring ketosis

On a rapid weight-loss diet you will usually start to burn fat instead of sugar within the first 48 hours. To measure the ketone levels in your urine, buy urinary test strips, called lypolisis strips, from any pharmacy, which will show you if your carbohydrate/insulin balance is at optimum levels for fat burning. You should do this twice a day: before breakfast and before your evening meal. Your levels need to be between trace and small (0.5-1.5 mmol-l).

Caution: if your levels rise to above moderate (4 mmol-l), you are not eating enough and should increase your low GI carbohydrates until the ketones are reduced to between trace and small (0.5-1.5 mmol-l). Always drink plenty of water: at least eight large glasses per day.

My trip to Kuala Lumpur, Malaysia and Singapore, July 2010

This was my first trip on a budget airline (Air Asia); it definitely changed my opinion of budget airlines. This trip is more a business development and prospecting trip rather than an assignment. On the surface KL does look developed. However I have my doubts regarding the psyche of the Malaysians. I took in the usual site such as the Petronas Tower etc. The weather, the fauna and flora resembles Colombo; I did not enjoy the high humidity and the afternoon thundershowers.

Singapore was as usual (I have stopped counting the number of times I have been there) very orderly and hit the usual shopping and fun places. In my opinion the Singaporeans have not only developed in terms of the look and feel of the place but also in terms of the psyche of the people. I truly believe that they do think like westerners and the Japanese.

Let me give a classic example. As mentioned earlier I went to Malaysia and Singapore during the monsoon season and I made an observation. In KL when it rains; like in Sri Lanka the people stopped what ever they were doing and took shelter from the rain. Those who even had umbrellas took shelter as it appear they did not want to get there footwear wet.

However, in Singapore it was very different. I happened to be out one day early morning (going for a walk) when it started to rain. I was walking pasta a primary school and this is what I saw. A teacher was leading a group of very small children (6-7 years) who were clad in rain gear and they walked in a line and came out of the premises and they walked to the MTR station and got in to the train. Undoubtedly they were going on some sort of educational trip. What does this mean: In my opinion the Singaporeans are teaching their children to face obstacles and overcome / work around / find solutions to them. This is the essence of the psyche of an industrialized nation as opposed to an agrarian nation which generally accepts the affects of the elements as “gods will” or “karma”.

So even the very small children are trained to deal with a simple thing as the rain and have an attitude of using the right equipment to allow them to go about their daily business. So in adult life they do go and conquer the world economically.

I can certainly say that in Sri Lanka the vast majority of people have this agrarian psyche. Based on my observations it seems that quite a number of people in Malaysia still do too. So the challenge for those of us who have the privilege of influencing people is to; in some way contribute towards instilling the right attitude rather than anything else. I can say from my experience as a consultant and a trainer I derive more satisfaction in seeing this than my clients make huge profits. I say this because these individuals with the right attitude have the potential to influence / be a role model for the masses in these underdeveloped countries.

NYC INTERIOR DESIGN FIRMS STYLE

NYC INTERIOR DESIGN FIRMS

NYC Interior Design Firms Thomas Britt knows how to create a glamorous interior better than anyone, so when he promised to give “a sort of sense Adrian” an austere industrial building, he knew exactly what to do. Like Adrian, the legendary costume designer, knew glamorous is a quality difficult to achieve. To achieve this, Britt sought inspiration from its customers: a couple, both in the international financial world, and their adorable son.

“My goal was to create a smart home NYC Interior Design Firms of the 21st century of a young international couple,” says Britt transform their building generic six-story ceiling in Tribeca in a family home. His plan, executed with Valentino associated Samsonadze was to create the illusion of architecture, where there was none, and stresses the unconventional combinations of colors, luxurious fabrics, mother of pearl and lacquered antiques and modern art (paired collect works of Indian and Pakistani artists, but also pieces of Americans, including Louise Nevelson and Sol LeWitt).

Britt set a young voice in the lobby, the space on two floors, with steel stairs steep. “We needed to warm up to Hall and to make it more attractive,” says Britt, who has cleverly divided into individual zones (soft, floor to ceiling curtains dramatically tied back) in order to reduce its appearance. It has saturated the wall in red paint, then hang it on three “triumphantly scaled” diamond-glass mirrors your own design.

You can also add a touch of light to the room. That no one can find a Louis XVI console painted lobby of a fossil old, put a couple of lamps ‘iceberg’ 1940 FRENCH plaster on it.

A small back room in the rear portion of the first floor is equally joyous. Cozy the pupal stage, the room is dominated by a Diva like gold bed in an alcove and partially hidden by thick curtains turquoise. red pillows on the bed making it pop blue and gold. Small tables inlaid with mother of pearl to add an exotic touch. An Indian dhurries with blue, gold and red pulls together.

As in many houses in the city, the main parts of the population are on the second floor. Britt treatment living room double height, is a huge expense. The palette is crisp set by the booty white curtains, 22 feet high huge red border. A high-level white towers of Murano glass chandelier in a white sofa, chairs and red carpet red and white barrel. “When you’re in this room, do not know what country you are,” said Britt NYC Interior Design Firms. “You can be anywhere. The decor is influenced by all the places I’ve been”.

NYC INTERIOR DESIGN FIRMS
NYC INTERIOR DESIGN FIRMS
NYC INTERIOR DESIGN FIRMS

Fallout 4 – V.A.N.S… What Does It Do? Why Would Anyone Want To Take/Use It? [Explanation with Example]

I saw someone ask this in the Official Steam Forum, wondering why someone would even pick the VANS Perk (the Skill to use it) while levelling. I wanted to come back here and post, as a Quick Tip perhaps, a short explanation on what V.A.N.S. actually does (and how it can be helpful to players).

Briefly summarized, V.A.N.S. is a Perk of Intelligence (requiring only 1 INT to Unlock) that lets the V.A.T.S. interface ‘show you the way’ to your marked objective/quest/mission location. An example I recorded of how it looks, is below:

Recorded aboard The Prydwen, this is a short example of how VANS looks in Fallout 4.
(Reduced size, framerate and quality, to fit Upload requirements at Steam)
Click to see slightly larger Full Size
On Steam, at http://steamcommunity.com/sharedfiles/filedetails/?id=966498722

To use V.A.N.S., simply hold the Hotkey for opening VATS for a short time (eg. on PC, instead of hitting ‘Q’ quickly once, to enter V.A.T.S., hold it down) – let go of the ‘Q’ key, after about two full seconds or so – even if the Pip-Boy has not fully opened yet. Then hit ‘TAB’ to close the Pip-Boy right away, once the ‘green trail’ is seen.
You do not need to move or turn at all, until after closing the Pip-Boy fully (for example, I do not use the mouse at all to use V.A.N.S., on PC, I just open the Pip-Boy with ‘Q’ and close the Pip-Boy with ‘TAB’).
[Perhaps this will help those having issues with opening/closing/viewing the ‘trail’…]

If you’ve played Skyrim, it is similar to the Clairvoyance Spell in that game, as it will then illuminate a ‘trail’ that looks like a tube of smoke along the ground, that you can follow (but in Fallout 4 it is ‘Pip-Boy Green’, as opposed to ‘SKYrim Blue’).

While this doesn’t seem needed as Fallout 4 has both Map Marks (on the Map in the Pip-Boy and at the bottom of the Screen in a Compass) and Floating Markers (that can be seen on Doors, above NPCs, etc). V.A.N.S. is helpful in a slightly different way. It shows you the ‘Main Path to take’ to get to your Marked Objective/Quest/Mission (as in, “go to this Street and use this Road”).

For example, if you are jumping around in the back hills or lost in the skyscrapers of Downtown, it will guide you out of where you are with the ‘green steam trail’ and show you how to get back to the main roads, then it will illuminate which way to go from there, too.

The Map Markers that are normally available only show the ‘overall’ or ‘general’ Heading, like a Compass (N, E, W, S) and not ‘how to go around this thing in front of you’ or ‘how to get back to the main road first’. Those last concepts are where the usefulness in V.A.N.S. shines; in how it can guide you from exactly where you are, first around whatever is in front of you (to the nearest main path), then how to go on from there to your next objective.

Try it out on your next Character perhaps – and have fun in Fallout 4!

Who needs to curb the carbs?

It goes without saying that everyone should consider cutting out refined sugar and flour products, plus high levels of processed foods that are full of junk fats, as they are nutritionally redundant in the human body. You should also consider giving up caffeine and moderating your alcohol intake, particularly if you suffer from any of the symptoms of unstable blood sugar and insulin resistance.

Many people are not even aware of the symptoms of eating too many refined and dense carbohydrates. They have become used to living in what I call ‘the discomfort zone’. They have forgotten what it is like to wake up full of energy, think it’s normal to feel bloated after meals and rely too heavily on stimulants such as coffee to get themselves through the day.

Diet Start

This sorry state of affairs becomes their normal state of being — it is no wonder that the symptoms of degenerative disease creep up on many people un-noticed. They are so used to living below their physical potential that they don’t recognise the signs until it is sometimes too late.

If you are more genetically disposed to gain weight readily when exposed to an unhealthy diet and lifestyle then restricting the amount and type of carbohydrate foods that you eat may be the right choice for you. Such a diet regime may also suit you if you have developed insulin resistance as the result of a diet based on high levels of refined and complex carbohydrates that outweigh your energy requirements, plus too much saturated fat, with little fibre and water. Unless, that is, you are one of those people who leads an active lifestyle or has a high metabolic rate, and already eats a diet with relatively high levels of healthy complex carbohydrates (brown rice, potatoes, wholegrains and certain vegetables, fruit and pulses) without accompanying weight and health problems. If so, why are you reading this? Sounds like you are already doing what is right for your body.

How to Cope with Too Many Snow Days

Ice and Snow, Go Away!

This has been the worst winter since I moved to Atlanta eight years ago. We have six-week terms, and during these last six weeks, we lost two days to extremely cold temperatures (by Southern standards), three additional days because of the “snowpocalypse” that buried Atlanta, and now I’m home again due to Winter Storm “Pax” that will likely shut us down the rest of the week. That’s nearly one-third of our term lost!

Adding to my dilemma, our calendar builds in week-long breaks at the end of each six week term. So we won’t be back in school next week either. It’s a serious wrinkle in my plans.

I talked to my fourth graders about this yesterday, and we worked out a plan so they could continue to work from home during these inclement weather days. It’s a really rainy, dreary day anyway (we’re at the “wintry mix” stage of the storm), so it’s not like they’d be outside sledding today. I also suspect that many parents are welcoming the activities at this stage of the winter!

Here are my suggestions for telecommuting with your class during winter weather.

Building a Virtual Classroom

1. Choose a mix of activities that can be shared with parents. I knew early last night that we’d be off today, so I found some activities that aligned with what we’re studying right now. While many of the activities require computer access, I purposefully included some that do not. For example, we’re building weather instruments out of household items, writing stories, continuing our reading, etc. But we’re also using some online resources.

2. Take advantage of online instructional videos. Two of my favorite free resources are LearnZillion and Khan Academy. I selected videos that align with the math and ELA content we’re working on now.

3. Stay accessible through your Learning Management System. We use Edmodo in our class, and it’s a great tool for turning in assignments and having class discussions. I’m checking in throughout the day to answer students’ questions and participate in the discussion questions I set up there earlier.

4. Take advantage of the resources students have at home. I teach in a 1:1 iPad classroom, so we’re constantly on iPads. There are lots of flash-based games that we can’t run on our iPads, however. I’m fortunate that all of my students have computers at home, so I’m incorporating more of those activities for students to complete. I’m also choosing some really fun and engaging simulation games that we just don’t ever get to in class. Two examples:

Law Craft – For the record, all of the games at iCivics.org are worth checking out. In this particular one, students work to craft a law and take it through the legislative process. They have to build support by making concessions, work out the details through committees, and ultimately get the president to sign it. It teaches a lot about how a bill becomes a law.

Edheads Weather – This aligns with the weather forecasting aspect of our weather unit. Students will work through different weather maps to report the weather and predict future weather events. It’s another great interactive game. I highly recommend the activities at the Edheads website. The only downside is that there are lots of ads, and sometimes pop-ups.

5. Be flexible – I can’t really help students troubleshoot tech issues on their home computers, and I can’t make them do the activities at home. I’m not making any of the activities mandatory, but they’re still available. I’m hoping that with the good mix of opportunities, parents and students will take advantage of the resources I’m offering. But I won’t punish a student who doesn’t. If even a few kids do the activities, it’s better than writing off the weather days as a complete loss.

Preparation is Key
It would be impossible to implement this plan with fourth graders if a lot of our technology norms and routines hadn’t already been established. My students are familiar with my class website, Edmodo, and my expectations. Integrating technology in the classroom makes the transition to our virtual classroom seamless.

How do you handle inclement weather days with your class? Do you have any plans resources to keep students engaged while they’re away from the classroom? I’d love to hear your ideas in the comments!

On an unrelated note, I have been MIA from the blogging world since October. As I’ve mentioned before, I’ve started working on a PhD in addition to teaching full-time and managing my toddler, so I’ve been insanely busy! I have an amazing student teacher this semester, however, so I’m starting to delegate more. I’m hopeful that will free up a little more time and energy so I can get back to blogging and reading all the stuff I’ve missed. Perhaps these weather days will also assist with that!

The Secret Knowledge of Fourth Graders

As I was reminded in reading all of the June Currently’s, not everyone is on summer vacation yet. So for those of you who are not yet enjoying time off, I wanted to share a fun creative writing activity that works well for the end of the year.

One of my favorite books to share with students is The Secret Knowledge of Grown-Ups by David Wisniewski.

In this highly-entertaining book, Wisniewski takes several “rules” that children often hear — like “eat your vegetables” — and explains the real reason that rule exists. For example, we don’t eat our vegetables because they make us healthy. The real reason we eat them is to stop them from rising up and taking over the world! Or, we don’t brush our hair to help us look neat, we do it to stop the hair from growing back into our heads and crowding out our brains. The book is filled with hilarious examples and colorful illustrations that my students loved.

I read excerpts from this book over the course of a couple days, and several of my students looked at it in their free-time. We then set out to write our own examples for a class book entitled “The Secret Knowledge of Fourth Graders.”

Here are some of the “rules” students wrote about:

  • Why you need to read “Just Right Books”
  • Why we use number 2 pencils on tests
  • Why you can only check out 2 books from the library at a time
  • Why we take AR tests
  • Why it’s important not to be tardy
  • Why we return library books on time
  • Why we have homework
  • Why we use pencils instead of pens
  • Why we don’t bend the pages of a book
  • Why we stack chairs at the end of the day
  • Why we take standardized tests

The creativity in the “real” reasons why we do these things was fantastic. Here’s an example from one of my students:

We wrote our final drafts on our iPads in Pages using the Visual Report template. That helped tremendously with the formatting.

I’m planning to share several of these examples with my students next year, and I will definitely do this activity again. My students enjoyed it so much that several of them were talking about making other “spin-off” books such as The Secret Knowledge of Minecraft Players or The Secret Knowledge of Readers. I’m sorry that I didn’t get to see how those turned out as well.

If you’ve never read The Secret Knowledge of Grown-Ups, I highly recommend it. It’s great for sparking creative writing ideas, and it can provide a fun writing activity in the late stages of the year.

What are some other school rules you can envision your students writing about? I’d love to hear your ideas in the comments!

MODERN RESIDENCE LAKE HOUSE DESIGN BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

See all of its 340 square meters, the lake house designed by David Guerra Architecture located in Minas Gerais, Brazil. The very steep terrain, as the permit was built by architect has the opportunity to build a box-shaped structure with overhanging balconies. Residents are a mother and her adult son, so the house must meet their need for privacy and comfort, and entertainment. The landscape box provided by an excellent situation increases the value, while the collection is very personal spaces. Benefits son of a bedroom with a separate entrance, located on the ground floor, next to the playroom. Gourmet kitchen is also located on the lower floor where there are also two additional bedrooms and a service area. Balcony and terrace make the connection to fresh air and beautiful scenery. The first floor features a garage, laundry room, living room and dining room, balcony, a guest room and master bedroom.

This is a nice place to live, providing a platform for entertainment and relaxation for its residents and their guests, do not you think?

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

Men’s Body Click Diet part 3

What happened with my patient Brooks shows how this scenario plays out. It also reveals why I think that such mysterious and sometimes chronic inflammations of the prostate are usually not infections but instead have a lot to do with factors that are also related to abnormal growth or cancers of the prostate.

Brooks is a 50-year-old businessman whose previously dependable penis had become much less reliable with regard to its sexual responsibilities. At the same time he suffered from discomfort with urination, some hesitancy in starting his urinary stream and the need to get up at night to urinate more than once, which had been his previous custom. He was alarmed that whatever was going on represented some sort of permanent equipment failure. Told at first by both a general practitioner and a urologist that his prostate was ‘pretty normal’ and later that it was a ‘little enlarged’, he had undergone two courses of antibiotic treatment for nonspecific prostatitis. His symptoms improved while he was on the antibiotics but returned when he finished the medication.

I had a telephone consultation with him and after hearing him out and considering various possibilities, I suggested to him that he had ‘some kind of mischief’ with his prostate. This was a much softer diagnosis than that of nonspecific prostatitis. But it suggested a treatment that was aimed more at making his prostate happy than at trying to kill some unseen, unidentified and perhaps nonexistent germs.

Diet Start

The concept of trying to make some organ in your body happy seem, alien to a regular guy like Brooks. He shares with most people the medical notion that there is a specific treatment for every condition and that this treatment is not a strategy to make some part of your body happy. It did, however, make Brooks happy when I suggested that part of his therapy was at least daily efforts to encourage the emptying of his prostate and its tubing by provoking an ejaculation. This was contrary to the no-sex advice he had been given earlier, which seemed to me like the equivalent of telling someone with a bad cold not to blow his nose.

I offered Brooks a package of additional measures to make his prostate happy. These included daily doses of soy protein, flaxseed powder, flaxseed oil, zinc and an antifungal medicine. If you understand why I loaded my shotgun with such a diversity of remedies and how they all fit together, you will also see how I perceive that the whole range of prostate mischief from inflammation to cancer fits together.

I’ve already explained the soy protein and flaxseed powder. I also recommended an additional supplement of flaxseed oil. The prostate gland is one of the richest sources of the hormonelike substances that are made from omega-3 fatty acids, with which flaxseed oil is loaded. They are called prostaglandins, named for the very organ under discussion, because they were first isolated from fluids found in the prostate. (Soon after their discovery in prostatic fluids, they were found to be present in a wide variety of animal tissues of all kinds and not at all exclusive to the prostate, but the name stuck.) The use of fatty acids in flaxseed oil helps the prostate make prostaglandins. But the more important motive for a prescription of flaxseed oil was the strong likelihood that Brooks, like most people, was deficient in omega-3 oils. The flaxseed oil, then, was generally beneficial rather than a treatment aimed specifically at the prostate.

I recommended that Brooks take zinc because it helps the immune system fight off infections and control the body’s inflammatory response to infection. Finally, I prescribed the antifungal medicine because of my consistent experience with other patients where I’d seen that an overgrowth of fungus germs, particularly yeasts, has a proclivity to bother people’s reproductive systems. I have often found stubborn cases of prostate problems in men to be responsive to antifungal drugs.

But there’s another, more important angle to the antifungal treatment Igave Brooks and the many other men I’ve treated in a similar way. In order for the isoflavones and lignans in soy protein and flaxseed powder to be transformed into the substances that beneficially modulate hormone chemistry, they must pass through the digestive tract, where they are changed by certain germs that live there. If the normal distribution of healthy flora has been disturbed so that there are too many bad germs and not enough good germs, the capacity of the intestinal flora to help hormone chemistry will be seriously impaired. Antibiotics are by far the most significant disrupter of intestinal germ populations. A single course of an antibiotic prescription can affect this balance for months or longer. My prescription of an antifungal medicine for Brooks was aimed at two overlapping targets. One was the possibility that a fungal infection was directly related to the prostate inflammation; the other was that his two courses of antibiotics had made him worse by causing a disturbance in his bowel germ population that would correct itself once the number of yeast germs living there was reduced.

Within ten days Brooks and his prostate were both happy. His equipment returned to reliable functioning and he has remained well since. He is as pleased as he is surprised. This is true for many men whose similar responses to simple changes in diet don’t jibe with their expectation that I would have to treat them by calling out the big guns rather than coaxing their bodies back into balance. I’m confident that the remedies I suggested for Brooks worked because they were specifically connected to achieving a hormonal balance governed by a combination of factors related to his digestive flora and an intake of substances that made his prostate happy.

It’s not a big step from consideration of acute problems, such as what Brooks had, to the more chronic problems of prostate enlargement andprostate cancer.

Quick Tip: The Sims 3 – Game Recording Is Slightly Darker Than The ‘Normal’ Colours Of Regular Gameplay [FIX]

Just a Quick Tip for those of you recording The Sims 3 and finding that your videos are looking ‘darker’ than the original gameplay itself – a problem that has been around for some people for over a year now… It’s not that the game isn’t recordable (although for some people they got nothing but ‘blank/black screens’ a few years ago) it’s that the recordings are coming out, what looks like, a few shades darker than what the game really is.
I was recently seeing a spike in the number of people talking about this problem again and decided to see if I could find a fix, or at least a workaround, for it; and what I found was something that everyone can do for now (at least until AMD/NVIDIA or Maxis/EA makes an update that fully fixes the issue) and that is simply: to run The Sims 3 in Windowed Mode.

Whether you are using Dxtory, Bandicam, Afterburner or most other game recording programs (even NVIDIA’s Shadowplay has the same issue for some people), the fix [more of a workaround] that I found for now at least allows you to record your Sims 3 gameplay with proper colours, as you can see in these frames extracted from a couple of game recordings, below:

Comparison between the display modes and the colours when recording (Darker vs. ‘Normal’) for the recording issue with The Sims 3, showing that the workaround works [at least for now] in two extracted frames from two game recordings (one in Windowed Mode and one in Fullscreen Mode). [In the right half, the camera has been ‘zoomed in’]

Have fun recording your Sims 3 gameplay once again, if this problem has made you stop – and
See You In The Games!

Trip to Hyderabad Cont….

Well there are scheduling issues so will go to get my ticket & visa on thursday. Everything else is back on schedule. Trying to contact some of my friends who are in India so that we may be able to meet over there.

I have been doing this job since 2002 and travelling overseas since then; however this trip will be my first time on a budget airline. Dont know what to expect? When I got my online booking it said Meal – To be purchased. some how flying and buying your food did not sound OK to me. I am sure that what ever my first choice is it will be over by the time the airline staff get to me.

Anyway need to finish up all the stuff for today to be able to watch the opening match between Sri Lanka & South frica (ICC Trophy)

Back to School – Math Edition

It might be time to think about renaming my blog, because I’m really excited about teaching math this year! It all started when I read the book Number Talks over the summer.

I’ve always understood the importance of mental math and computation strategies, but I’d never really understood how to teach it. It felt like something kids either had or they didn’t. This year, however, I decided that we’d start doing number talks from day #1, and I’m already blown away by how my students are developing as mathematical thinkers. They’re able to solve complicated addition problems in their heads — no paper allowed — and they’re articulating their strategies well. I’ve been introducing a new strategy every 2-3 days, and it’s been awesome. We’ll be moving on to subtraction strategies in a few days, and I have high expectations for that to.

To help students with the mental math strategies, I made a set of posters that describe each strategy with an example of how it works. There are 20 posters in all — one for each strategy described in the book.

The complete set is available in my TpT store, and they’ll be on sale for 28% off this weekend as part of the Teachers Pay Teachers back to school sale if you use the code BTS13.

As I’ve been working on order of operations and number sense with my fourth graders, I also introduced the four fours problem. The premise of the problem is this:
Using some arithmetic combination of four 4’s, can you write an equation for each of the numbers from 1-100? Here are the rules:
  • You may use any combination of addition, subtraction, multiplication, and/or division
  • You may combine numbers, e.g., use 2 of the fours to make the number 44
  • You may insert decimal points
  • You may use a four as an exponent
  • You may use square roots
  • You may use factorials, e.g., 4! is equivalent to 4 x 3 x 2 x 1 = 24
  • You may use overbars to make a decimal repeat
  • You may NOT use any digit other than a four
  • You MUST use all four 4’s in each solution

Before I go on, let me give two caveats. 1) I didn’t expect all of my students to be able to handle all of these rules. Square roots, exponents, and factorials are WAY above my fourth graders heads generally, but I did have a handful that could handle it. And there are plenty of solutions to be found that don’t require those operations. 2) This problem freaked out the parents more than it scared the kids, I think. I had a few panicked parents that I had to talk down while we were working on this, but in the end, it was well worth it. My students were so excited about math and problem solving as we worked through this problem. It was homework each night to try to find a few more solutions, and then we’d add to a chart during math class. Look at all that my students accomplished after just two days!

We’ve filled in a bunch more solutions since then, but of course I left my camera at school this weekend…
Finally, in honor of the big back to school sale on TpT, I’ve bundled four of my favorite math resources into a back to school math pack for this weekend only. 
Sold separately, this is $17 worth of products that I’m selling this weekend for $10, but after Monday, the bundle will no longer be available in my store. So if you’ve had any of these on your wish list…

Hope everyone had a great week! I’m still learning how to juggle grad school with teaching, but I’m hopeful that I’ll still be posting at least once a week.

Off to start catching up on blog reading and filling my cart for the TpT sale! Have a great weekend!

What is the Best Way to Warm-Up?

There is a lot of controversy and conflicting opinions on what you should do for a warm-up for exercise.   One of the reasons is that warm-ups should vary based on the activity you are preparing for and your level of fitness.
As the name implies one of the key goals in warm-up is to literally raise the body temperature and gradually ramp up the cardiovascular system to be prepared for harder efforts.     The length of warm-up should be based on the intensity of the activity.     Low intensity activities like moderate pace walking really require no specific warm-up as you can simply ease into the activity itself as a warm-up.     For activities like competitive athletic events that involve high intensity effort the warm-up should be longer.
In the same way, you have to consider your fitness level because a warm-up for a highly fit individual may be relatively high intensity exercise for a deconditioned person.
For all warm-ups, a 1 – 5-minute period of escalating cardiovascular exercise that raises heart rate and body temperature is advisable.    For high intensity athletic events this should be extended until the athlete breaks a sweat without being fatigued.   
This literal warm-up can be done on a cardiovascular exercise machine or via dynamic bodyweight exercises like squats, lunges, planks, push-ups, etc.    
Once you raise body temperature you can include some dynamic stretching with an emphasis on movements that address key joints and muscles involved in the actual activity you are warming up for.   For example, for tennis warming up the shoulder joint and surrounding muscles is important while for cycling this is less relevant.
 A Proven Warm-up Protocol
Warm-ups for sports participation have been researched and there is one in particular protocol that is proven to reduce injuries by improving muscle strength, balance, and coordination.    This protocol is called the FIFA 11+ Program and involves doing 15 exercises.    For a complete how to guide click here:  https://www.slideshare.net/PedMenCoach/fifa-11-warmup-to-prevent-injuries 

Although this protocol was developed for soccer it can easily be modified to fit just about any competitive sport!

Hello, 2015!

Another year is in the books, and as always, I’m excited to be seeing the start of a new year. Last year will be remembered for its big highs and deep lows, but I know that everything happens for a reason, and I feel like I’m in a good place to start 2015.

And one place I plan to start is being a better blogger! So here’s my Currently post for January 2015.

Listening – It’s my daughter’s bedtime here, and my husband has bedtime duty tonight. It’s a rare moment when the TV is off, the dogs are asleep, and all is quiet in the house. I’m savoring it.

Loving – I think that New Year’s Day may be my favorite day of the year because it is a fresh start where it feels like anything is possible. I often feel this way at the beginning of the school year, too, but I think I prefer this time of year because there’s more predictability with everything. I already know my students very well; we’ve built our routines and expectations, and the only things that need to be changed are the things I *want* to change. It’s an empowering holiday.

Thinking – A major reason why I haven’t been blogging much lately is because of my Ph.D. program. It feels weird to be writing something that doesn’t have a lengthy bibliography attached to it! I continue to be excited about my dissertation topic, though, and I’ve been thinking about it more and more. I plan to write about the role of social media in teacher professional learning. The short version is that I’m going to study how reading and writing about classroom practices through blogging affects teachers’ feelings of effectiveness in the classroom (self-efficacy beliefs). I think connecting with other teachers through blogging and other social media has been one of the best moves I’ve ever made as a teacher, and I’m curious to find out if others feel the same way and what consequences it might have. One of my classes this semester is actually requiring me to blog about my research, so I’ll be setting that up in the next week. It will be a separate blog as I doubt my classmates in other programs will really want to read about Eberopolis, but I’ll share a link here if you’re interested in following or learning more.

Wanting – I had 18 blog posts in 2014. Pathetic. I have a notebook full of ideas, so now I need to get them out here. My goal is to blog at least once a week, and as I’ve been getting other things in my life better organized, I think that’s realistic.

Needing – I set some big goals for this vacation as far as getting myself organized for the new year, and so far, I’ve done a great job. For example, I already have 2 months of healthy meals planned for my family (written on sticky notes so I can shuffle them around when stuff inevitably comes up).

And I’ve been cleaning closets and creating a new workspace to boost my productivity in the new year. I even made my annual pilgrimage to The Container Store today! I just need to wrap up my remaining projects tomorrow so I can enjoy my weekend before returning to school on Monday. (I’m @eberopolis on Instagram if you want to see more about those projects…). 
Finally, my three areas:
YES to my health. I lost nearly 20 pounds between Labor Day and Christmas, and while my trip to see my family for the holidays reversed that trend a little, I’d like to continue to focus on my health in 2015. I’ve been doing Weight Watchers, and losing weight has been easy when I’ve taken the time to plan what I’m going to eat and track what I eat throughout the day. I’m ready to get back on track.
Maybe to becoming a morning person. I already get to work by 7:15 each morning, but I would hardly call myself a morning person. I read The Miracle Morning by Hal Elrod over break, and it has me thinking about whether I should try to get up earlier to add things like meditation and exercise to my morning routines. I’m thinking I’ll try it for a month and see how it goes. (The book was good, btw. An easy read to be sure). 
I wish…I love my job–I really do–but I’m starting to feel like it’s time for me to tackle a new challenge. I want to be able to work with other teachers to help them troubleshoot issues in their classrooms, improve their teaching, and use technology more effectively. I purposefully chose to go into an Educational Leadership PhD program for that reason; ultimately I want to teach in higher ed and/or become an administrator. I’m not ready to do all of that yet, but I wish that I could find an instructional coaching position or something similar that would let me work more directly with teachers while I keep working on my program. It might be time to start that hunt this year. 
Okay, I promise I will be back soon…I have a couple of other posts in draft mode almost ready to share about some of the new things I’ve been doing in my classroom this year. Hopefully you’ll FLIP when you read them! 😉
Happy new year!

‘Setting Of The Month’: Bandicam’s Xvid Implementation (with Screenshots and Quality Analysis)

As the First Post of a new type of article here at The Game Tips And More Blog
[started due to popular demand!], I would like to explain a bit about my ‘Setting Of The Month’:
What is meant by “Of The Month” (at least at this blog), is less ‘lunar syzygy’ and more ‘what is currently being served’, in concept. Every once in a while I will post what Recording Settings or Rendering Settings I am currently using. I want to begin doing these posts in response to two things:

  • It was requested by you readers! Over the first half of the year, I run a Poll here at the Blog (it is located on the top right panel area) and currently, the single most popular Requested Topic For Future Posts is “Tips and Tricks of Video Capturing and Editing”. Therefore, as part of answering that call ‘by popular demand’, by my respected readers, I want to share as a ‘Tip’ what settings I have been using of late to capture – not to tell you ‘what to use’, but to simply give everyone a suggestion – perhaps even a place to start from, when recording or editing their gameplay adventures.
  • I see ‘settings’ asked about a lot, everywhere. Whether it is in game forums, technical forums, video editing and recording application forums, or even in my Inbox once in a while, people are constantly asking what settings to use, or “what settings do you use” – and that’s great! I’m glad to see helpful replies of others (and sometimes short explanations on how someone is using a specific setting and why). As anyone who has asked me directly knows, I enjoy helping others with suggestions on settings and usually try to explain why I am using one setting over another.
And so, here is the first edition of a new addition to this blog, without further adieu:

 

This Month’s Featured Setting

Bandicam’s Xvid Codec

For the past little while, I have been messing with the Xvid codec – not the ‘official’ one from XviD.org that you have to download – the one that is built-in to Bandicam, easily available via pull-down menu in the Format area, where you choose which codec you want to record with. As of the most recent version of Bandicam [at the time of this post], Xvid is now the Default Codec that is pre-selected, when you install/startup Bandicam. Where in previous versions, a ‘Bandisoft-optimized’ MPEG-1 codec was the Default, now a ‘Bandisoft-optimized’ version of Xvid is thrust into the limelight – and I wanted to test this puppy out and see what tricks it can do!

If you’ve were computing through the 1990’s, you may have heard about the Xvid codec. A competitor to the DivX codec around the turn of the millennium, I am actually going to skip over the history of the Xvid codec [other than this one paragraph]. Parts of such history may actually be a ‘dark affair’ (depending on who you talk to), worthy of it’s own short documentary, as the DivX vs XviD history has some aspects in common to the history of other products and companies that were popular over time [with Saturday Night Television Specials such as “Apple vs Microsoft”, “Xerox vs Apple” and more..]. As with many companies and products in popular use today, they all have “Origin Stories” that you won’t find on The Internet and never will… And Now, Back To Your Regularly Scheduled Program

The Xvid codec is a version of MPEG-4 (it is MPEG-4 Part 2 or “H.263/ASP”), so it is directly related to it’s younger-but-bigger brother, AVC (which is MPEG-4 Part 10 or “H.264/AVC”). As such, Xvid [ASP] does not have many of the functions that are found in H.264 [AVC], such as Deblocking, where the codec will try to ‘hide’ some compression artifacts that occur due to over-compression; but Xvid is still a great codec to record with, it’s main strength being speed. Because it doesn’t have many of the processing functions of it’s more recent and bulkier MPEG-4 versions, it can ‘figure out a frame and save it to a file’ very quickly – which is essentially what is happening, technically, when game recording.

Recording with Bandicam’s Default settings for their implementation of Xvid [designated herein as “Xvid(b)”**, to show that it is the “Bandicam-Optimized Version of Xvid”] will give you a Quality Setting of 80%. The capturing framerate, by Default, is set at 30 fps (Frames-Per-Second). The audio format, in this Default setting, is compressed “MPEG-1 Layer 2” format (MP2) for the Audio. Here is a screenshot showing what all of Bandicam’s Default settings, for their implementation of Xvid, looks like in one image:

The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Default Settings)
Click to see Full Size

Below, are a sampling of a handful of games and the framerate performance hits that were seen while recording with these Default Xvid(b) settings (i.e. the differences between ‘playing the game and not recording’ versus ‘playing the game and recording at the same time’):
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }

Recorded Game Title                     Resolution      Performance Hit (Δ)
Hitman: Absolution Benchmark 1366×768 ~ 2 fps
Hitman: Absolution Benchmark 2560×1440 ~ 4 fps
FurMark (Full Run) 1366×768 ~ 2 fps
FurMark (Full Run) 2560×1440 ~ 0 fps
Unigine Valley Benchmark 1366×768 ~ 6 fps
Unigine Valley Benchmark 2560×1440
Batman: Arkham City Benchmark 1366×768 ~ 4 fps
Batman: Arkham City Benchmark 2560×1440 ~ 9 fps
Skyrim (Introduction) 1366×768 ~ 0-8 fps
Skyrim (Introduction) 2560×1440
Minecraft 1366×768 ~ 0 fps
Minecraft 2560×1440 ~ 0 fps

table code created by Danny Sanchez (journalistopia.com)

As you can see in the table above, the difference in framerate between ‘Playing’ and ‘Playing While Recording’ is very minimal [the performance ‘drain’ being accentuated in higher resolutions for most games]. Although only a handful of games were tested, I did try testing both spectra of resolutions possibly in use by the average gamer today, by recording with an ‘enthusiast’ resolution (2K/1440p) as well as a commonly-run laptop/notebook resolution (1366×768) which could also be run by older or less-capable systems. Bandicam’s optimized Xvid performs very well in the tests, with almost as low of a performance change as the ‘super-light-performance-hitting’ MJPEG codec.

Like MJPEG however, Xvid’s weakness is the lack of tools to compensate for compression. Again, I mention here the MPEG-4/AVC ability to somewhat ‘hide’ compression artifacts, with code for utilities such as “Deblocking” built into the codec, where the edges of areas that the codec is making its calculations in are ‘softened’, so that the ‘blocky’ effect of high compression (called Macroblocking) is less visible. In Xvid, there is no such utility, so if too high a compression level is attempted [too low a bitrate is stipulated], then these ‘block’ artifacts can easily be seen, especially in ‘flatter’ areas of a frame (portions of the screen with less color and/or changes happening), as seen in the below frames, extractions from the actual recorded video frames themselves:

[In the examples below, when the compression artifacts aren’t as obvious, I will show the entire screenshot in compressed JPG format, then underneath I ‘zoom in’ to show the compression artifacts from the codec as magnified extractions from the original video frames, in BMP (BitMaP) format. I use sampled areas for that, as full 1440p Screenshots in an uncompressed format would be over 10MB each]

Xvid(b)** at 90% Quality [altered from Default 80% Quality Setting], Battlefield 3.
Click to see Full Size
The result when recording at 90% Quality (up from the Default of 80%) was very satisfactory, with only ‘nit-pickable’ parts to show the codec’s weaknesses, like the Upper Left area of this scene above (with the dark interior areas). Some artifacting can also be seen in the Middle Top area (slightly obvious even in this compressed JPG), where the plain sky areas take the brunt of the compression of this frame taken from the original game recording video produced by Bandicam.

Xvid(b)** at Bandicam’s Default of 80% Quality, Battlefield 3.
Click to see Full Size
The above image is taken from a game recording of Battlefield 3 that had some pistol action going on, with an explosion caught in the background. The quality of Bandicam’s Default setting isn’t too bad and high action scenes can actually look quite acceptable. For example, in this frame above, with the explosion occurring on an upper walkway, only the Right Edge of the explosion (with the debris) has obvious Macroblocking – and the sidewalk [and foliage] macroblocks had to be ‘looked for’ here – and are less noticeable in the moving video. The ‘flatter area’ (with less colour variations) in this scene, is the poster advertisement, which the codec punishes with compression, leaving colour banding and macroblocks evident. The rest of scene is more complicated material and demands the codec to utilize more bitrate, ending up looking not too bad at all, when VBR is used (Variable BitRate, “changing data rate”) mode).

[I personally found that in dark (as in nighttime) scenes, at 80% Quality there was distracting colour quantization (colour quality loss) and macroblocks (little square compression artifacts); but for most material, the 80% Quality setting seems ok to use for Xvid(b)**, most of the time]

Xvid(b)** at Bandicam’s Default setting for Xvid of 80% Quality, the Batman: Arkham City Benchmark.
Click to see Full Size
The above image is an extracted frame from a recording of the Batman: Arkham City Benchmark. A very difficult scene for any codec (unless you tell it to ‘keep all quality, use 100%’ and then don’t mind the larger file size that will be created) it is hard for a codec to decide what to compress and what not to, as particles fly all over the place and light and dark areas shift around as the Benchmark runs through this area with changing levels/regions of Luma [lightness, brightness]. Bandicam’s Xvid did a good job trying to keep the text sharp at 1440p – but at 80% Quality, macroblocks are everywhere (those present in the screenshot above are not from the JPG compression, they were present in the game recording itself). At 80% Quality, anything with subtle gradient colour changes are absolutely tortured by the codec, seen especially in the change from light to dark in the Center Top light fixture area and the Left Lower curtain region. Bright areas however, such as the light fixtures themselves and almost all of the particles flying around, are judged by the codec to be ‘important to human eyes’ and detail is kept high for those objects.

Xvid(b)** at Bandicam’s Default setting of 80% Quality, Minecraft.
Click to see Full Size
The above frame is taken from a recording of the Minecraft Demo starting shoreline, originally captured at 1440p (the image is resized down to 1280×720). I was interested in how Xvid would handle Minecraft, a difficult game to capture and compress, as hard edges and lines are everywhere. Bandicam’s version of Xvid did surprisingly well, as the video recording itself is a joy to watch, with compression artifacts barely noticeable (recording at higher resolutions helps with that, but uses more disk space for the game recordings). Magnification of the original video frame is just below (next image):

These two sampled regions are magnified to 200% (doubled in size). They were extracted from the game recording frame above, which itself came from the original game recording produced by Bandicam and the built-in Xvid codec.
Click to see Full Size
While not as obvious in the moving video, the above frame extractions (both Left and Right sides) show Gibbs Effects [‘ringing’ or ‘mosquito noise’] around the hard edges of Minecraft’s graphics. The colour gradient changes, blending slowly into the background/sky colour in the Right Half of the above image also cause Ringing and Macroblocks to occur. Distant water gets treated with extreme prejudice by the codec, as the jumble of lines and animation from the textures are ‘sluffed together’ [my technical term] and Macroblocks are obvious. Again, these artifacts are more obvious in the stills from the game recording – the video itself, when watched, was more appealing to the eye and these compression artifacts aren’t as noticed as the frames fly by and the cow looks at you in a wondering manner.

Regardless of some of Xvid’s compression shortcomings illustrated above, with the speed that it performs at, along with the ability to turn up the Quality setting in Bandicam, these artifacts shown will not occur as often in higher quality settings – and then Xvid can be a nice codec to run with, especially if a system cannot handle a codec that does higher processing on the frames [taking more time to do calculations on them and saving them to a file, creating ‘lag’]. Older systems or laptops that do not have the hardware to utilize GPU-accelerated game recording (with codecs such as NVIDIA’s CUDA and NVENC, AMD’s App Acceleration and Intel’s Quick Sync) can utilize Xvid as a less-taxing codec to record with [as another option on the Utility Belt of Game Recording Codecs to choose from]. Indeed, it is almost as speed efficient as the ever-compatible MJPEG codec, for capturing, editing and compression.

The default setting, when installing Bandicam, creates a GOP of 150 [GOP stands for Group Of Pictures or the number of frames between Information/Key Frames in a video]. This is fine for normal viewing (and it leaves a lot of headroom for compressing ‘only the differences’ between the frames, resulting in smaller filesizes), but a large GOP can create problems with editing, as many NLE’s (Non-Linear Editors, such as Sony’s Vegas/MovieStudio line, Adobe’s Premiere products, Lightworks and more) do not work well with so many frames in-between the Keyframes – however, editors such as Corel’s VideoStudio, CyberLink’s PowerDirector and Microsoft’s own Movie Maker do not exhibit this issue [I tested these three applications by hand, myself, just to make sure and they imported fine and were handled without the “glitchy-ness” or “trails” that were exhibited in (for example) Vegas].

Although originally captured for an article on the Xvid codec here (which can potentially also experience the issue mentioned in the above paragraph) this image shows an example of what the “trails” or “glitchy-ness” will look like, as it was captured from a video with a Large GOP (large keyframe interval) output produced by Vegas. (Click to see Full Size)

When editing a video with a large GOP, the video editing application must ‘seek’ to the next Keyframe whenever it has to process a request and calculate/build all of the frames from there (which slows things down and delays processing and editing). Also, depending on the application, with some programs video can only be ‘cut’ on keyframes (unless an application is coded to create keyframes where needed). All of these steps and problems created by ‘Long-GOP’ video can be avoided [when using the above-mentioned video editing programs] by simply adjusting the Keyframe Interval in the Xvid settings to “1”.

One caveat to keep in mind, with setting a Keyframe Interval of “1”: although it will now make for speedy/easier/morecompatible editing with many video editing applications, the codec will not have as much ‘headroom’ to work with, when compressing your game recording material. 
What this means is, that instead of only keeping track of the changes between frames (say, a person running by down the side of the screen), where the codec will literally only save those ‘differences’ in the file; it now has to save every single portion of the viewable screen in every single frame, complete and independent in ‘stand-alone’ frames (the KeyFrames), and while the video will be much faster in seeking and have increased editing compatibility, the codec requires much more bitrate now, to save ‘everything’ in every single frame.
The result: your video file size will end up larger than before. However, you can now edit the video in Vegas, Premiere, Lightworks and more… the choice of how to go about this aspect then, is up to you [whether to use a GOP of 1 for easier editing, or not]. If you do not use these specific video editing programs (perhaps instead, you are using PowerDirector or VideoStudio Pro or Movie Maker, which to not have as much trouble with ‘Long-GOP’ material, not needing the GOP to be one frame) or you are not having problems with whatever editor you are currently using, there is no need to make this change to the Xvid recording settings in Bandicam [this is why there is no green indicator arrow in my ‘Suggested Settings’ illustration coming up in a little while, for this option]
Staying on the topic of Bitrate [from the above paragraph] for a moment, “..what kind of file sizes are we looking at..?”, you might ask. Well, here is a sampling of some of the Bitrates that were seen when recording with Xvid(b)** at Bandicam’s Default Settings for the codec:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }
Recorded Game Title                    Resolution     BitRate (Mbps, GBph) 
Hitman: Absolution Benchmark 1366×768 ~ 34 Mbps, 0.97GB/hour
Hitman: Absolution Benchmark 2560×1440 ~ 83 Mbps, 2.4GB/hour
FurMark (Full Run) 1366×768 ~ 44 Mbps, 1.2GB/hour
FurMark (Full Run) 2560×1440 ~ 45 Mbps, 1.2GB/hour
Unigine Valley Benchmark 1366×768 ~ 37 Mbps, 1.06GB/hour
Unigine Valley Benchmark 2560×1440
Batman: Arkham City Benchmark 1366×768 ~ 20 Mbps, 0.57GB/hour
Batman: Arkham City Benchmark 2560×1440 ~ 54 Mbps, 1.5GB/hour
table code created by Danny Sanchez (journalistopia.com)
Just to compare some file sizes of other codecs: the Low Quality setting for the Dxtory codec (with Compression) recorded a run of the Unigine Valley Benchmark (at 1080p) at about 326Mbps (9.3GB/hour), while FRAPS produced a recording of about 291Mbps (8.3GB/hour), with Lagarith (in Default/RGB Mode) creating a recording of the same material that ran at about 235Mbps (6.7GB/hour). Of course, bitrates fluctuate, depending on the complexity of the material (more movement/action/etc, which requires more bitrate to properly represent the material.. but a longer explanation of that is outside the scope of this post [believe it or not…I’m trying to keep them ‘short’! hah]).
The other setting that can be changed in the Bandicam interface for their version of the Xvid codec, is the Quality. Here is an example of the differences in quality output at the various Quality settings for Bandicam’s Xvid:
Comparison between varying Quality settings, for Bandicam’s version of Xvid (from Left to Right; Quality at 40%, 60%, 80% and 100% Quality). The JPG compression used for this composite [the four videos side-by-side] did not overly affect the Macroblocking occurring – the ‘blockyness’ seen in these frames is almost untouched, even though the videos from the original Unigine Valley Benchmark recordings were converted into this JPEG image – this is very close to how it looked in the video (although slightly more noticeable as still images). Click to see Full Size
As you can see, the perceived quality for Xvid goes down quickly, with Macroblocks becoming more obvious as the quality setting goes down. However, acceptable Quality can be maintained if the quality setting is kept high [in my opinion, stay at 90% or higher if you can]. Remember though, that with the higher quality settings, more space will be required by the codec, to save all of that data. Also, if using a Keyframe Interval of “1” (creating a GOP size of one frame, each frame in the video then being a Keyframe), the codec will also not have as much room to compress the images/video and your output size will increase. As stated above though, the benefit of using a Keyframe Interval of “1” is, then your game recordings will be easily importable/editable in NLEs like Premiere, Vegas, Lightworks, etc – if you are are having troubles with those specific applications [if you are not, there is no need to limit the GOP to one frame, which is why there is no green arrow indicator in the below illustration]. Below, are my Suggested Settings then, for this codec in Bandicam, in one image:
The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Suggested Settings):
Quality is at 90%, PCM (“Uncompressed”) Audio is selected [mainly for editing compatibility], a higher compression (“Smaller file Size” option) is chosen (and a Keyframe interval of “1” is suggested for compatibility with editing applications such as Vegas, Premiere, Lightworks, etc. if required [only change if needed as it increases file size, no green arrow indicator is shown on the Keyframe Interval])
Click to see Full Size

Overall, I think ‘Bandisoft’s version of Xvid’ in Bandicam does a decent job with Quality – and is downright excellent where Performance is concerned. On my system (and hopefully yours), Bandicam’s Xvid had very little drain on the performance of the game while recording with it, creating very little ‘lag’ while recording (it had a low ‘performance hit’). As long as the quality setting is kept high (90-100%), the recorded output Quality can be quite acceptable, with only a little Macroblocking (block shapes being visible) and Posterization [colour quantization, which is a reduction in the amount of colours, resulting in ‘colour banding’ or ‘bands’ seen] in the darker and ‘flatter’ areas of a frame in a game recording (Macroblocking may occur in areas such as skies, less-colourful regions, etc). Try out some recordings with Bandicam’s version of Xvid for yourself and see if you prefer using it for recording your gaming adventures.
Please note dear reader, that I am not saying “this codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – use what you prefer. 



See you in the games!


Personal Short Version/Opinion:


While the Bandisoft-optimized version of Xvid included in Bandicam works pretty well and is fast, I find myself not using it very often, other than this past month or so, for testing. After recording for a while with Xvid’s ‘successor’, h.264/AVC, the extra features of Deblocking and other tools in AVC have ‘spoiled’ me. Going back to the slightly more ‘blocky’ output of Xvid – even though it creates very little lag when recording – is slightly distracting to my eyes. When I see an Xvid game capture of mine now, my eyes are instantly drawn to the darker/flatter areas of the scene and those little tiny block shapes…and I sigh at the slowly-aging Xvid codec, remembering its’ heyday’ of compressing my TV shows recorded on my ATi TV Wonder PCI card. The late 1990’s and the 2000’s were ‘Xvid’s Time’ to me, when I used it for almost everything – and while it performs well in game recording today (even Xvid.org’s ‘Official’ version, with the right settings), I am now just too used to the benefits of more modern codecs, like h.264/AVC, which can even use the videocard/hardware, for GPU-accelerated recording.

I realize there are a lot of people gaming on laptops out there, and not everyone has a dedicated/separate videocard inside their system to record with, but the more I use my GPU to record with, the more I am impressed with the performance when recording most games [note that some games ‘don’t like’ GPU-accelerated recording (are not fully coded for compatibility with it) and these games have large hits to performance with it]. At the moment of this writing, I have two NVIDIA videocards running in my system (performing together in SLI mode) and I am enjoying using the GPU-accelerated CUDA offering in Bandicam to record with. Like AMD’s AppAcceleration and INTEL’s QuickSync, CUDA utilizes H.264/AVC through the hardware to record, having high performance [for most games] and producing nice output, utilizing some of the newer aspects of MPEG-4 (such as Deblocking) when recording, to hide compression artifacts [the little ‘glitches’ from compressing the video]. The speed, and presence of light ‘compression correction’ from this hardware implementation of MPEG4 has spoiled me now, and I am finding it hard to go back to the slightly more obvious artifacting in ‘older’ codecs, such as MPEG-1 or Xvid (which is ‘older’ MPEG-4), especially when those codecs are used at lower quality settings, to try and save hard drive space. (Turning up the Quality settings for these codecs helps a lot, if your system can handle it)

As CPU architecture evolves and modern CPUs have ‘mini-GPUs’ built into them, the differentiation of capability between ‘gaming rigs’ and ‘gaming laptops’ blurs [as far as game recording goes], as GPU-accelerated game recording is possible now by less and less expensive hardware (AMD APUs) and processors (INTEL’s QuickSync), even within laptops [as opposed to full desktop systems]. This means that “gaming laptops” now have much more capability when it comes to game recording, today. If your laptop is capable of using GPU-accelerated recording, give it a try. If it is not, systems that do not use the GPU to compress their video can still perform well recording games, as is shown with the above article, by using Xvid. “If you can’t choose the H.264 encoder in Bandicam, choose ‘Xvid'” ~ Quote from the Bandicam.com website.

Do some testing of your own dear reader – and have fun experimenting, finding a codec that you will eventually prefer to record with – and See You In The Games…
Last Remarks (in addition/continuation to the Prologue of this article): 
Another thing to keep in mind is, that my settings (both for Recording and Editing/Rendering) change slightly over time… I may have been able to purchase a new disk drive recently for instance, so then I will allow my recordings to take up more space [for a while anyway]. I may be trying out a Demo/Trial of a new version of a Video Editing Application, so I have been experimenting with some different Rendering settings. Perhaps a videocard driver or codec was updated, so now I will experiment a bit with the recording application settings, seeing if I can squeeze a little more Quality out of my recordings, while keeping the Performance high. All of these reasons and a few more, are why my settings constantly change over time. Don’t worry, I’ll try to remember to come here and share them with you, anytime I find a “Good Combination” that works well for either High Quality or Fast Performance, the ‘Holy Grail’ of course being a Perfect balance of both. 
As I have begun more dedicated testing over the past few years, I have found that specific games themselves ‘prefer’ certain recording and rendering settings over others. What I mean by “prefer” is: as new game rendering engines are written, hardware architectures change, and programmers utilize ‘something over another’ in general during a game’s development, this affects what settings a game ‘works better with’, whether it is a specific game recording program, hardware/GPU, or specific recording and rendering settings; hence my usage of the word “prefer”. 
This is why, for example, some games will perform better on an AMD/ATi-based videocard in Benchmarks and Reviews than an NVIDIA-based GPU – and then other games will have better results on an NVIDIA-based videocard over an AMD/ATi-based GPU – those games were simply being developed [the programmers wrote the code] on a system with that certain GPU installed in it at the time. This also means there is a chance of specific optimizations in programming that slightly favour one brand of GPU over another [and they may even have been ‘compensated for their efforts’ by that respective company, but *shhh* these things aren’t spoken of outside Mordor]. 
In regards to the above and game recording, I have found that some games will have better performance with different game recording applications as well. For example, one game may have less of a performance hit while recording with Dxtory and then another game will have better performance recording with Bandicam [as an example] – it all depends on the code and how it is written and being rendered. That’s why I ‘change it up’ so often, altering my recording settings (and rendering settings) as each game I play exposes its nuances. That’s what I mean if I ever say a game ‘seems to prefer’ recording with one game recording program over another. 
Keep this all of the above in mind then and also remember dear reader, that I am never telling you “you should use this”, I am always suggesting only a possibility in my posts, and it is always up to you to try it out and decide if you want to use a recommendation of mine or not.
 [I encourage everyone to always take the good ideas from others and leave the bad, making up a composite of their own liking and preferences and what they want to utilize – whether it is with game recording and editing, or Life In General – but, that last part is for another blog…] 

 **[designated as “Xvid(b)”, to show that it is the “Bandicam-Optimized Version of Xvid”]

And More: “An Internal Error Occurred When Overlapped Buffer Is Full” in VideoStudio X10 [Error Workaround]

[This post is currently Text-Only for speed of Posting. I may return and add example Screenshots and more, Soon™]


Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue

Go to “Update 2017-05-02


Just a quick bit of information, for those using Corel’s VideoStudio X10 to edit and render their video projects and running into this error…

I was working on trying to finish some of the many, many, many projects I have in various stages of completion, and ran into an odd error when trying to render a Project in VideoStudio X10. The error said only:


“An Internal Error Occurred When Overlapped Buffer Is Full”


This is somewhat odd, as this is more of a generic Windows Application error than it is a VS (VideoStudio) error. So, I went to the Official Corel Support Forums and did other online searching…






I found a lot of people who have experienced this error, but none that had any solutions, sadly.
So, it was Time To Go Troubleshooting! /maskandcape

Now initially, I was trying to render in 1080p using the more common MPEG-4 Part 10 (h.264/AVC) format. VSx10 offers GPU-acceleration (where it utilizes the power of the videocard), like many video editing programs do these days, to help render and compress the output – and the quality of MPEG-4 can be quite good for the size, when it comes to compression.

BOOM, the error pops up, interrupting the rendering process.
Okay, time to see what could be causing it.

First, I tried to render in the other Formats that VSx10 offered (MPEG2, WMV, etc) and nothing would finish rendering without this error – except for Windows Media Video format (WMV).

Since WMV does not require GPU-acceleration to render, I disabled all GPU-powered optimization in the Preferences of the application (disabling ‘hardware acceleration’ where I could). I was hoping this would render with other formats without acceleration (MPEG-4 does not ‘require’ hardware acceleration, for example, but it renders much faster with it). Still, the error came up in any other format than WMV…

So, to dig in a bit of a different hole than the WMV format to find answers, I took out all elements of the Project except for the first video files (taking out the audio files, the Text added, images, etc) and tried to render again. It worked!

I then added in the Text elements (made with Corel’s built-in Title tools). It worked!

Since it worked with Text and all video files now, I added in the Audio Files.

BOOM, the error popped up again.
That’s okay, it’s progress – now we know that something related to the Audio is having troubles.

I was looking at the Audio Files and noticed that I had some ‘Audio Filters’ and ‘Speed/Time-Lapse’ adjustments on them (to help them synchronize somewhat in the Project), so I took those effects out and tried to render again. It worked!

Okay, so since it works with the Audio Files present – without ‘FX’ on them – then it might have something to do with the Filtering/effects…
I enabled only the Speed/Time-Lapse adjustments and left out the Audio Filters for the Audio Files that utilized them. It worked!
I then enabled the Audio Filters again and BOOM, the error reared up and roared in my face.

So, it appears that there may be something with the Audio Filters in VideoStudio that does not play nicely when you go to render the Project (for those experiencing this problem..). Nothing but WMV would produce output for me, at the time of this posting (this is with VideoStudio X10 Service Pack 1).


My advice then, is to try to utilize audio files that do not require Audio Filters in VSx10, for now (until the source of this problem is fixed in full).


If you must apply some sort of affects or filtering, there are many audio editing tools out there that can be used, at least until this gets looked at/fixed someday. Some suggestions off the top of my head are:

  • Sony’s Sound Forge (recently acquired by MAGIX, I think).
    This is a pretty capable application, with lots of effects, pitch shifting, fading and filtering available – I have used it a lot in the past when it was run by Sony. It costs some money, however.
  • Audacity.
    This is a free (Open Source) audio editing application that is popular and has many of the features and filters that Sound Forge has – I have used this too, before I could afford to buy any editors at all.
  • Adobe Audition.
    Adobe acquired the older-but-popular Cool Edit Pro audio editing program, which I personally used to use and like. I have not used it since Adobe took over, so I cannot vouch for how this one is – I assume that it is similar to how CEP was – which was quite capable. It is not free, however.


For now then, I will bring this up with Corel Support and see what they have to say about it – until this gets ‘fixed’, avoid utilizing Audio Filters in VideoStudio, if you can – for now…


Hopefully this information will be of use to those who, like me, were running into this annoying error in an otherwise decent video editing application – and hopefully it gets fixed soon!


If I remember, I will come back and Update this Post when a ‘Fix’ has been released!



Update 2017-05-02: While not a ‘Fix’ for this issue, I have done more testing and found what is essentially the issue with Corel’s VideoStudio x10 and how it handles some Audio formats (sample rate / bit depth). I am in contact with Corel Support at this time via e-mail, discussing this issue.




Here is what I have found after further testing:


I did some further testing on the audio files, looking at their specific properties. 
I found that the files giving this error were in 24bit depth, 96000Hz format. 

Just to experiment/investigate, I converted the audio file to 16bit depth, 44000Hz format (Standard Compact Disc Audio WAVeform format) and it worked! 

Here is what I found then, during more testing on the bit depth:

– 16bit audio file = Audio Filters and Speed Adjustment can both be used at the same time
– 24bit audio file = Only one or the other can be used at a time

Both Audio Filter and Speed Adjustment added = Error with 24bit audio file at 96000Hz sample rate
(I found that the 24bit depth audio files were also 96000Hz..)

Testing 24bit audio files at 44000Hz resulted in NO ERROR = it worked
(when using both an Audio Filter and a Speed Adjustment at the same time)

The error was repeatable however, with a 96kHz 24bit audio source file (having both a ‘trouble’ Audio Filter (one of those three listed above) and a Speed Adjustment on it).

Although this is not a ‘game breaking’ issue (I personally don’t mind converting any of my 24bit audio source files that are at 96kHz into 16bit depth versions but it is more work), this may be an issue for more novice users, who may not know how to do so. 
[Hmm, maybe I will make a Quick Tip on this, to help those people out…]

Related to this, many commercially available Samples (sound source files) are distributed to the customer as 24bit audio files, for higher fidelity. 
(Example: I purchased Sample Packs from Sony Creative Software and they came in a bundle as 24bit audio files. Another purchased Pack from BigFishAudio also had the source files being delivered as 24bit sources)
If any of those are at 96kHz (I see that most are at 44kHz anyway…), then it may bring up this issue. 

I realize too that it may be my machine, or my specific combination of hardware, interacting (CPU/Sound/etc) and also there does not seem to be many 96kHz 24bit audio files floating around in general usage (from what little I have seen, perhaps there are, but as I stated above, commercially-purchased packs seem to come in 44kHz 24bit format, at most).

Although this is not a ‘Fix’ directly dear readers, hopefully this information can help you VideoStudio users to avoid it, ‘stepping around it’ at least, for now – and perhaps this testing and information can even be utilized improve VideoStudio for the future… (I am in contact with their Support now, discussing these occurrences).






[Note: I am not affiliated with Corel or any of the other companies mentioned herein. I have not and I will not receive any compensation of any kind, for mentioning VideoStudio here. I am merely a user of the product and have used many of the other products mentioned above, including other video editing programs, not omitting Open Source / Free applications. I simply share information I have discovered, in hopes that it will help others.]

5 Tips to Make Your Paperless Classroom Work

I’m now more than 3/4 of the way through my year of 1:1 iPad work with fourth graders, and while I hoped to have a paperless classroom, the reality has been a bit different. We’re definitely using less paper than we would without iPads, but I can’t pretend that we’re paper-free. As I reflect on this school year, here are five things I would do differently next year to make the paperless transition go even better.

1. Begin the year with a typing boot camp.
The biggest obstacle to the paperless classroom at the beginning of fourth grade is simply that the kids (for the most part) don’t know how to type. Tasks that should have been quick ended up taking 3-4 times the length that I’d anticipated just because the kids were hunting for keys on the keyboard. I think if I’d spent the first term of the year working on typing skills, it would have made a big difference. And on a related note, I’d encourage students to get bluetooth keyboards to use with their iPads (assuming the school won’t invest in those, too).

2. Transition gradually.
When my students start fourth grade, they come from a school that does not have 1:1 iPads. As a result, the technology integration is a big adjustment–for both students and parents. Going fully paperless can be a huge culture shock for the students, and the transition can produce some anxiety. Even with tech-savvy students, there can be a huge learning curve with different apps, and it can quickly get frustrating for some kids–especially the ones who were very comfortable with school as they previously knew it. Start small with a few key apps (e.g., Edmodo, Evernote) and build from there.

3. Try to give options.
Some students are far more comfortable with the iPads than others, and sometimes their lack of comfort can impact their work. With writing, for example, I’ve learned to give students the option of drafting on paper, even though there are lots of mind-mapping and word processing apps they could use for drafting. Usually once they have that first draft on paper, they’re more comfortable typing it in to make revisions and edits. For some of my students, that flexibility makes a huge difference in the amount of writing they can endure. For other students, the iPads boost productivity. Either way, we know that choice is important to students, and this is another important way to differentiate in a 1:1 classroom.

4. Don’t force it.
There are still some contexts where it makes more sense to use paper. Math tests are one example for me. I don’t tend to give students multiple choice tests in math, and I want them to have plenty of space to show their work. Yes, they could do the work on GoodReader with a stylus and turn it in on Edmodo, but that’s not necessarily more efficient for me to grade–especially on a multipage test. Similarly, we’re still using paper and a notebook for our word study work. We use differentiated spelling lists with Words Their Way, and I want students to go through the practice of sorting and recording their words each week. Paper makes sense for that.

5. Stay flexible, and have a backup plan.
At the beginning of the year, we were using our iPads for almost everything (we still are). But then I got sick, and I had to write sub plans. I never know who I’m going to have as a sub, but there are two things that are certain: 1) the sub will never be as comfortable managing a class full of iPads as I am, and 2) students will be more apt to misbehave when they have a sub. As a result, I don’t usually include the iPads in my sub plans unless I know that there will be someone there to enforce my expectations (e.g., someone I co-teach with or my student teacher). If students expect to use the iPads for everything, it can really throw a wrench into the system to take those away, even for a day. Therefore, it’s important to be flexible with using them throughout the year so that students aren’t dependent on them. Sure, they might have a preference, but they need to be able to function without them. That’s also true for times when the power goes out, the internet goes down, or a software glitch makes the iPad temporarily unavailable.

Any tips to add? I’d love to hear your thoughts in the comments section.

This post contains affiliate links, but I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

10 Must-Have Tools for the Busy Teacher

This year was uniquely challenging for me. I had my biggest class ever (28 students) , and I was co-teaching all day with teachers and paras from the special ed department–also a first. Meanwhile, I started working on my PhD, and my toddler constantly kept me busy. My plate has never been so full!

If you’re a teacher who often feels pulled in every direction, then this list is for you. These are my top 10 tools for juggling it all. Hopefully you’ll find some to use as well!

1. Nozbe

Nozbe is the ultimate task list manager. You can organize by projects — school, work, home, etc., create recurring tasks, and so much more. I can access it from any device, add attachments, and email stuff to my to-do list. I started out with the free version, and I quickly upgraded to the paid version. At $96/year, the paid version has a hefty price tag, but this app was SO much better than any other task manager I’d tried, and it’s been worth every penny. If you’re someone who has lots of projects going at once, this app is worth exploring.

2. Evernote

This is my brain online. All of my coursework and notes are in Evernote, and all of my anecdotal records and student work samples are in here as well. I was able to use the free version for many years, and then once my husband and I decided to go digital with all of our financial documents, etc., I upgraded to the premium version. At $35/year, it’s pretty affordable.

3. Dropbox

 I don’t think I could function without Dropbox. I switch between so many devices between work, home, and school each day, but Dropbox allows me to keep track of everything. All of my lesson plans, TpT purchases, readings for class, and more are in my Dropbox account. I’m still living off of the free space, but I’m getting the daily reminders that my Dropbox is nearly full. Might need to upgrade that soon, too. Premium accounts offer 100 GB of storage for $99/year.

4. GoodReader


 I’ve used this app a lot with my students, but I’m finding it to be totally clutch for my grad school stuff, too. I’m doing tons of research for my courses and scoping out dissertation ideas, and GoodReader allows me to annotate all of the PDF’s I’m amassing. I’ve created a folder on Dropbox for all of the articles I’ve gathered, and I can sync that folder to GoodReader so I can read it all on my iPad. I can also send it back to Evernote when I finish. One of my dear friends told me that I’d have laundry baskets full of research cluttering my house while I worked on my PhD, but not so…It’s all electronic!

5. GoogleCalendar

I have a variety of calendars on Google — class schedules, deadlines, school events, etc. Some of these I share with my husband so we can both be aware of each other’s events. Other calendars I share with my students and their parents so they can be aware of upcoming events and tests. I like that all of my calendars are color-coded so I know which calendar I’m looking at, and I can select/de-select different calendars to narrow my focus if I’m looking for something in particular.

6. YouCanBook.Me

This free site allows me to share portions of my calendar with parents so they can schedule parent-teacher conferences. I choose the days they can see, set the times they can schedule, and manage the maximum time blocks they can reserve. They don’t get to see any of the events on my calendar, just whether I’m available or not. If they reserve a time slot, it will automatically add it to my calendar and send me an email. It’s eliminated the back-and-forth process of conference scheduling and allowed me to manage my time better.

7. Planbook.com

Since I was co-teaching this year, I needed to find a way to share my plans easily from week to week. I tested out Planbook in August, and I loved it. I like that you can extend or bump lessons, attach files, and customize the fields that appear. It’s a great resource that’s keeping me much more organized. You can get a free trial of it before paying the $12 for an annual subscription.

8. Typinator

This is a tool that’s new to me, but Typinator is a text expander tool. There are several pieces of text that I find myself typing or copying/pasting over and over. Typinator allows me to create typing shortcuts for all of those. For example, if I want to type my blog address as a hyperlink when I comment on someone’s blog, I can simply type “~bl” and it will place the text there for me. I also use it for standard replies to emails such as when parents email me to say their child will be absent. I can type “~abs” and it will write: “Thanks for letting me know about the absence. I hope your child is feeling better soon! Today’s assignments will be posted on our class website, and let me know if there’s anything else you need.” Four key strokes = all of that. I find typing way faster than using the mouse, so this is a time saver that quickly adds up. It’s only available for Macs, and it’s priced in Euros (converts to around $36 US), but I use it all the time.

9. GoodReads


Distinct from GoodReader, GoodReads is an online community surrounding books. It allows me to keep track of the books I’m reading and which books I want to read next. As I’m starting my dissertation research, I’m constantly finding book titles that I want to check out. Similarly, there are lots of teaching books and children’s books that I want to investigate someday, and GoodReads helps me organize all of that. Best of all, I can use its scanning feature to scan barcodes when I’m browsing in the bookstore.

10. Edmodo

I used Edmodo a lot for collecting student work and grading tests/quizzes this year. It managed all of the submissions and kept the work organized for me so I could be more efficient with tracking these things. It also allowed me to create assignments, give and grade quizzes, communicate with students and parents, and so much more. This is a great free learning management system that was a centerpiece of my classroom this year.

With the exception of Typinator, which is only on my computers, all of these apps are cloud-based or mobile-friendly so I can get to them from any device. When I’m shifting between my iPhone, iPad, laptop, and desktop, that’s critical. I may be busy, but I can get to my projects anytime, anywhere, and I’m not hauling around tons of materials everywhere I go. These tools boost efficiency and minimize life clutter.

What are some tools you’re using this year to help with productivity? I’d love to hear more recommendations in the comments.

This post contained some affiliate links meaning that if you click on the link and purchase the app, a small part of your subscription cost will go to me instead of entirely to the company. I’m only recommending products that I highly use and pay for myself, however, and I hope you’ll find value in these resources as well. 

Peanut Benefits for Health

PEANUT BENEFITS FOR HEALTH

Peanut Benefits for Health – Peanuts are legumes that take the benefits to the area of the roots are forming pods, do you know if the bean plants it has the advantage of a very remarkable in the area of agricultural land, the reason is because the beans are plants that collaborate with types of mycorrhizal fungi to synthesize N in the air become available to the plant, N that includes nutrients that are needed by plants in large enough quantities, land former planted beans have levels of N were pretty much up intake N for the next crop is still there. Not only useful for agriculture, but peanuts also have benefits for our health.
Peanut Benefits For Health - 1
Now let us try to discuss specifically about the benefits of the bean plants to our body and how much is the benefit that we can take from this pod peanut plants. Consider the benefits of peanuts below:
Peanut Benefits for Health
1. Helps To Increase Fertility
For you are the woman I’m sure you’ve got the point. Peanuts contain folic acid, according to research women who ate peanuts 400 micrograms of folic acid have a lower risk of having a baby born with a serious neural tube defects up to 70% at the time before pregnancy and early pregnancy
2. It Can Prevent Painful Gallstones
During 20 years of research have shown if by consuming 1 ounce of peanut butter a week can reduce the risk of developing gallstones by 25%.
Peanut Benefits For Health
3. Can Help Reduce Depression And Stress
Peanuts are a good source of tryptophan, the role of these substances can increase serotonin antidepressant effects (which can affect the atmosphere in the heart) if there is an increase in the amount of serotonin in the blood.
4. Can Improve Memory
The beans have a content of vitamin B3 or also often called by naisin content is also beneficial to maintain the health of the brain and improve memory.
5. Lowers Bad Cholesterol
Peanuts contain cholesterol substances that are good for our bodies, as well as the good cholesterol can reduce cholesterol levels and can control the evil by means of dominating it.

Hopefully article Peanut Benefits for Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

High-quality protein

Our bodies are composed mainly of protein, which (after water) is the most abundant substance in the body. It is the major constituent of our muscles, tissues, skin, hormones, enzymes, antibodies and blood. Even after childhood protein plays a vital role in maintaining and rebuilding our bodies as they cope with the wear and tear of daily life.

Proteins are broken down by the process of digestion into units called amino acids, and the body requires 22 amino acids to form human protein. All but nine can be produced in the body. These nine are known as ‘essential amino acids‘ and have to be provided in the diet. Foods that contain all nine are termed ‘complete proteins’, and they include meat, fish, dairy and soya protein. Fruit, vegetables, grains and pulses are ‘incomplete proteins’ and have to be carefully combined to provide sufficient amino acids in the diet.

Diet Start

Protein is fundamental to rebalancing blood-sugar levels, because it encourages production of the hormone glucagon, which helps the body to release stored glycogen for energy and encourages the burning of fat. Glucagon also helps to balance excess insulin production.

What is Biological Value?

In order to be efficient, protein foods have to be of a high quality and have what is termed a high Biological Value (BV) — this indicates how much of theprotein is retained by the body. Eggs used to be classed as having the highest BY, but micro-filtered whey, whey-peptide blends and lactalbumin (whey- protein concentrate) are even higher. Micro-filtered whey protein used to be a useless by-product of cheese manufacturing. Now it is processed at very lowtemperatures and turned into a protein source with a very high BV that contains all essential and non-essential amino acids.

The only whey to go

To maintain a healthy immune system, blood, skin and muscles, you need to consume protein with a high By. Whey protein (which is derived from milk, see Q&A opposite) is an excellent supplement that has long been used by bodybuilders and athletes alike. It has many uses in a dietary regime:

¨ It encourages the formation of lean muscle mass

¨ It increases glutathione levels, which has great antioxidant and immune- boosting properties

¨ It helps to build healthy new collagen

¨ It provides an invaluable source of protein for vegetarians who are attempting to balance their diets

¨ It is a quick and easy way of having a high-protein meal or snack

¨ It can be incorporated into recipes as a replacement for carbohydrate ingredients.

There are a multitude of whey products on the market — some better than others. Many come in sweet flavours, which are great when making shakes and smoothies, but you need to source natural, unflavoured products if you want to incorporate whey-protein powder into savoury dishes such as soups. These are widely available through health-food stores and on the Web. Just make sure you don’t confuse them with slimmer’s meal-replacement powders, which are usually laden with carbohydrates.

The average serving of whey protein is a 25g (1 oz) scoop, but check on the label to see how much of that scoop comprises protein: the lower the protein content, the higher the carbohydrate content. And beware of `blends’: these are likely to be bulked up with milk and soya derivatives. To get the best out of your whey products, go for the highest protein concentration possible.

speed camera major malfunction? Or lazy police not reviewing photos? New Orleans police failed to review tickets generated by the automated cameras, and one guy has 10 tickets over 7 years for his parked truck

Actually, make that 11. After the first story ran last week, Schultz received another ticket on Saturday night. A security camera shows this one was actually triggered by a New Orleans Police Department vehicle speeding down the road, but as usual, Schultz was the unlucky recipient of the fine.

http://www.thedrive.com/news/20011/new-orleans-speed-camera-keeps-issuing-speeding-tickets-to-parked-cars

End result? More proof cops don’t give a shit about their jobs, and neither does the mayor or city of New Orleans. 2 cops certified that the two tickets initiated by speeding police vehicles (as seen in the video) went to Shultz. That’s just bull shit. Cops are speeding in a residential neighborhood, and other cops that are supposed to look at the damn photos, are not, they are rubber stamping them all. 

How to Overcome a Negative Habit



Habits are powerful.  Unfortunately, they often are created outside our consciousness and without our permission. However, we can consciously change habits. Habits shape our lives far more than we realize— they are so strong, in fact, that they can cause our brains to cling to them at the exclusion of all else, including common sense.
At the same time, positive habits can change our lives for the better. So how are habits created and what can we do to influence them in ourselves and our clients?
Three Parts of a Habit
The Cue: a situational trigger that is based on a reward you are seeking.
The Routine:  a physical or emotional action you take to obtain the reward.
The Reward:  the satisfaction you get by following the habit.

The Steps to Changing a Habit
Identify the Routine:  You must identify how you go from a particular cue to the routine of the habit and the reward it gives you.
Understand Cravings and Rewards

The first part of a habit is the cue, but before the cue there is some type of craving.  Cravings drive habits.   Understanding cravings is key to figuring out habits.  In a habit, there is a specific reward that satisfies a particular craving.    In other words, figure out what you are getting from the habit because you ARE getting something from it!
Rewards are powerful because they satisfy cravings. But we’re often not conscious of the cravings that drive our behaviors. For example, when developing the air freshening product Febreze marketers discovered that people craved a fresh scent at the end of a cleaning ritual.  They found a craving that people were not aware of.     This craving is so strong that without added scent most people do not get satisfaction from an air freshener that just removes odors from the air – they have to smell the scent!   It is exactly the same phenomenon with breath freshners which can be made to eliminate odor WITHOUT any taste/scent, but no one buys them!
Most cravings are like this: obvious in hindsight, but difficult to discern when they are in control of your behavior. It is critical to discover the cravings that drive habits to be able to change or create habits!   To figure out which cravings are driving particular habits, it’s useful to experiment with different rewards. For example, say your reward is having a cookie after studying every night.  The next time you study deliberately substitute something else for the cookie such as going for a short walk or having a cup of tea instead. 
The next time eat an apple and another time change call a friend for call, etc. What you choose to do instead of eating a cookie is not important.  The key is to test different hypotheses to determine the exact craving that is driving your routine.   Are you craving the cookie itself, or a break from work? If it’s the cookie, is it because you’re hungry? (In which case the apple should work just as well.) Or is it because you want the burst of energy the cookie provides? (And so coffee may work just as well.) Or is it where you eat the cookie and who you are with?  Do you go to a specific place to get and eat your cookie?  If so maybe the real craving may have to do with a desire to socialize.  
As you test four or five different rewards, use this technique to identify patterns.  After each activity, note the first three things that come to mind after your reward behavior. This can be emotions, random thoughts, reflections on how you’re feeling, or just the first three words that pop into your head. Then, set an alarm on your watch or computer for fifteen minutes. When it goes off, ask yourself: Do you still feel the urge for that cookie? The reason why it’s important to write down three things— even if they are meaningless words— is twofold. First, it forces a momentary awareness of what you are thinking or feeling.
By experimenting with different rewards, you can isolate what you are actually craving, which is essential in changing a habit.
Determine the Specific Cue for the Habit

This is the trigger that initiates the craving for the reward.   So it is very important to learn the cues for habits.   Common cues including being in a particular place, being with a particular person, a particular time of time of day, a specific emotional state, etc.    Asking yourself these five questions can be very helpful for identifying cues:
Where are you when the urge for a reward hits you?
What time is it?
What is your emotional state?
Who else is present?
What did you do right before you had the urge?
Have a Plan!
Once you understand the habit you want to change you need to create a plan to change the habit!   The easiest way to do that is have a specific plan of action whenever you experience the cue or cues.    For example, if you smoke when you have coffee know this and plan to do something else deliberately whenever you have a cup of coffee.   The plan is key or you will slip right back into the old routine.
Another example is having a few beers every night when you get home.  Through the first three steps you discover that having the beer helps you relax after a stressful day.    You also learned that going for a 20-minute walk or doing Tai Chi gives you that same reward of feeling relaxed.   So now you plan to either go for a walk or do Tai Chi ever day as soon as you get home (or even better before you get home!).

Giveaway Winner!

I had so much fun seeing what everyone posted in the Teacher Toolbox Trio linky. Thanks to everyone who linked up.

I went to the Random Number Generator this morning, and drumroll…

I’m excited to announce that Stephanie Ann from Sparkling in Kindergarten was the winner of the $25 Teachers Pay Teachers gift certificate. Congratulations, Stephanie Ann!

And welcome to all of my new followers! I have lots that I look forward to sharing this summer.

Have a great weekend!

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

This small apartment is an example of how to make the most of a limited space.This live well in apartments provided with large windows giving good natural light, open spaces and good storage options, including a large sub basement. The lounge is spacious and decorated in bright materials.

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

INTERIOR DESIGN STYLE FOR A SMALL APARTMENT

Upstairs is a beautiful model Dutch prosecutors. Create the mural are welcomed into a room like this.The the kitchen is located between the lobby and hall, and it offers plenty of cooking space. It is an ingenious closet in the hallway. As you can see, the secret of this event to find creative storage.

INTERIOR DESIGN FOR A SMALL APARTMENT

INTERIOR DESIGN FOR A SMALL APARTMENT

INTERIOR ROOM DESIGN FOR A SMALL APARTMENT

INTERIOR ROOM DESIGN FOR A SMALL APARTMENT

INTERIOR DESIGN BATHROOM FOR A SMALL APARTMENT

INTERIOR DESIGN BATHROOM FOR A SMALL APARTMENT

INTERIOR DESIGN SKETCH FOR A SMALL APARTMENT

INTERIOR DESIGN SKETCH FOR A SMALL APARTMENT

The Game Tips And More Blog’s Ludo Ludi (Game Play) #1-3

I wanted to start a video series that was Random Gameplay Video Clips that I have collected over time. I started out calling it FLASHBACK, creating a logo for it and everything; but I wanted a way to archive/share them out a little bit faster/easier, rather than ‘Featuring’ them every time, so I came up with the concept of “Ludo Ludi”.

It means “game” and “play” in Esperanto. The idea was to not label the gameplay clips or state what they are, in order to have other people enjoy the “surprise reminiscence” of the games. Viewers could try to guess what they are for fun or just enjoy them as part of a playlist where they didn’t know what was coming next. For the most part it would be easy to guess them of course; if you played the game, you’ll know what game it is and what class I played, etc.etc. But, I still thought it would be entertaining to have a bunch on a playlist of some sort, with no obvious names, having a transitory video (without logos/intros) of something loopable such as static – as though changing the channel on a television – in-between videos. With Youtube’s Playlist and Randomize features, this can now be done and one can sit and reminisce on games of yesteryear with my video clips showing snippets of gaming moments recorded from a wide variety of games! Everyone with ADD/ADHD can just click the Next button on the playlist to skip to the next one if the current one isn’t holding their interest! Everyone is a winner! With this in mind then, I now present one long paragraph and the first three installments of :

The Game Tips And More Blog’s New Gameplay Video Series, “Ludo Ludi (Game Play)”





Enjoy and See You In The Games!

And More: Corel’s VideoStudio – Crashing When Using ‘Open With’ To Import Clips Into VideoStudio [Fix/Workaround]

Just last Month, I picked up version 20 of Corel’s recently-updated video editing suite “VideoStudio” (nomenclature “X10”) and am having a lot of fun learning what it can do and how to do it all (coming from mainly editing videos with Sony’s Vegas ‘Movie Studio’ line of products [now taken over by MAGIX]). However, I quickly ran into a little issue with importing clips using the “Open With” option in Windows and wanted to share what I found…

Normally, in Windows you can ‘right-click’ a video file and mouse-over the menu option “Open With..”, which brings up a sub-menu of known applications, to ‘send’ the file to (‘opening the file with the chosen application’). Doing this, whichever application you select will startup and the file will be sent to it to work with.

However, doing this with a video clip and VideoStudio x10 I found, every time the program would open up, it would immediately ‘crash’ (close/stop/etc). Hmm… time for some Troubleshooting! I double-checked that the file in question was not corrupted excessively by playing it, testing it in a couple of video/media players, and even tried a few other clips that were ‘known good’ (that VS worked with before). Each time, using “Open With…”, the Splash Screen for VSx10 would show up and then just as the program itself looked like it was opening, the entire thing would crash and show this message:

Example of the “Corel VideoStudio has stopped working” Error Window Pop-Up
when trying to import a clip into VideoStudio X10 utilizing the “Open With” shortcut in Windows

I then went to the Corel ‘Official’ Fora [Forii?] and did some searching to see if anyone ran into this same issue. Unfortunately, all I could find were people experiencing ‘general crashes’, that is, crashing and non-starts without it being specifically associated with utilizing “Open With..”.

I then decided to try these same ‘testing files’ on some other video editing programs I have installed, such as Sony’s Vegas Movie Studio (now owned by MAGIX, the same company that makes the Movie Edit Pro product line, which I have no experience with yet, at this time). Using the “Open With..” command, Movie Studio was able to open and import all of the video clips without issue – so then, what’s up Corel? /tilthead

I thought of trying VideoStudio ‘on it’s own’, not importing or ‘sending’ anything to it – just opening the program and seeing if it works… Everything opened fine! I was just playing with the program the other day in fact, learning some of the features it offers [I’ll have to write a short ‘Review’ or at least a ‘First Impressions’ sometime of it]. So why was it being ‘fussy’ (to use the highly technical term)? I tried opening and closing the program a few times thinking about it, when I noticed that when I opened VideoStudio X10, I was being greeted by a nice-and-helpful “Welcome” StartUp Page…

The “Welcome” Section of VideoStudio
(Click to see Full Size)

Indeed, ‘The “Welcome” Startup Page’ offers a lot of helpful information on opening VideoStudio. There are Tutorial videos on some of the New Features for that version and even Basic Tutorials and Help File links. But wait – no editing interface! No Timeline, no Media Library to add clips – that’s it! That’s the problem! I went into the Settings to see if there was a Preferences option where I could set the Section to open VideoStudio to be – not the “Welcome” section, but the “Edit” section – the tab/area where all of the editing/mixing and importing takes place. There it was: Default Startup Page – and it was set to “Welcome Book”…

The Corel VideoStudio X10 Preferences Window
showing the Default Startup Area/Section which is shown when the program starts
(Click to see Full Size)

A simple pull-down menu change to “Edit” and that was it! Now, VideoStudio is opening to the “Edit” section/area every time. So, I tested it out: right-clicking on my video clip and mousing-over “Open With..” and then clicking on “Corel VideoStudio” – it worked! VS opened up and in a few seconds more, my little video clip was right there on the Timeline, waiting patiently to be edited. Woohoo!

Example of Corel VideoStudio x10 Starting Up In The EDIT Section
(Click to see Full Size)

Here is a video version of the steps above, made showing the error when trying to use “Open With..”, what happens and how to change it, as well as the final ‘working’ result of changing the option (after I finally figured out what it was):


[VIDEO NOT YET COMPLETE, IT WILL APPEAR HERE ONCE FINALIZED AND UPLOADED TO YOUTUBE]

Hopefully this will help any of you dear readers, who use VideoStudio and were running into this error/crash/issue when opening clips with VS (trying to use “Open With..”).. Enjoy and Have Fun editing your gameplay clips once again!

~Troy from The Game Tips And More Blog


[I’m calling this a Workaround, since this is more of that than a true ‘Fix’… It does not solve the base issue of VS not being able to import a clip using “Open With” without taking taking these steps (whether this is more Microsoft’s fault or Corel’s fault is beyond the scope of this post …and being more experienced in computer hardware than computer software (programming, etc), I would not have completely isolated the very base cause of the issue anyway – or at least, could not offer a 100% explanation of what is occurring)]


Note: I am not affiliated in any way with Corel and I have not, and I will not, be compensated for mentioning VideoStudio or any other of the products herein, in any way.  I have used other video editing products than these in the past, and will do so in the future, including free editing applications, such as VirtualDub, AviDemux, DVDVideoSoft products and more… I am merely an enthusiastic gamer-and-sometime-editor and wanted to share information that I discover about these products to help other gamers record-and-edit and have fun doing it, if I can do so.

Workout Anytime on FOX 19

Workout Anytime on FOX 19

Tony Petrocelli from Workout Anytime was recently featured on a segment on FOX 19 in Cincinnati. The segment is about what women do wrong while working out. Tony then talks about the locations and mentions that there are franchise opportunities.

Cincinnati News, FOX19-WXIX TV

You can view the full segment here.

Quick Tip: Can’t Record Your Game At All? (64-bit/32-bit Fix)

Just a quick tip for when it seems like you cannot record your game ‘at all’:
64-bit computing is still relatively new for home users, which means that not all 64-bit hardware and applications communicate without problems. Many game recording apps simply can’t record games that operate in 64-bit modes. Just look for a 32-bit version of your game/gameclient and then your game recording program (no matter which one you use, be it Dxtory, Bandicam, MSI Afterburner..) should be able to record the screen. [For games that use Java (eg. Minecraft), download the 32-bit Java at their website]

See you in the games!

HOUSE OF INCLUSION Koichi Kimura Architects

House of Inclusion” as-is called the firm FORM / Koichi Kimura Architects, is a home to extraordinary volumes built a new residence in Shiga, Japan …
“Every piece of this house has been designed so as to bathe in natural light to enhance the simple beauty from within” confides the Japanese architecture firm.We observe different windows and niches of light placed at strategic locations and atypical of this house of 151.71 m2.
A small patio is flirting with the wall on the outside and the living / dining room of the house.

HOUSE OF INCLUSION Koichi Kimura Architects
MODEL HOUSE OF INCLUSION Koichi Kimura Architects
EXTERIOR HOUSE OF INCLUSION Koichi Kimura Architects
DESIGN HOUSE OF INCLUSION Koichi Kimura Architects
INTERIOR HOUSE OF INCLUSION Koichi Kimura Architects

Superb materials were used for interior decoration, we welcome in particular the sublime and the bedroom floors polished concrete … WE LOVE IT!
The architects of the firm FORM / Koichi Kimura tell us more about this house. This house, Located in a new residential area, is for a 30-something couple. Surrounded By Other House, The Design Goal Was Set Up to block out the Outside world while Avoiding too much closure, as well as “to Provide Rich and sensuous spaces.
First, a small patio and a path connected to it Were Laid Out Between The living / dining room and exterior. They Are Surrounded by a wall That blocks off the line of sight from outside. Planting and lays out are ugly At The patio, so thats the picturesque images of green and water are Viewed From The rooms.
Enclosed by walls create indirect light That softly filling The Entire room, tea house presents scenes sentimental Here and There. The Living Space And The Life Lived There are enveloped by green and light, Creating an affectionate environment.

How to Organize your Summer Reading

Summer is the perfect time for me to make some progress on the massive stack of books that I accumulate throughout the year. You know that stack — and if you’re like me, that stack may have spawned offspring and multiplied into several stacks around the house. And given the number of summer book studies I keep reading about, I know the stack will continue to grow. Like last week, when I saw that Misty was going to read Number Talks, and I had to get the book.

Or this morning, when I read that Beth at Thinking of Teaching and Brenda at Primary Inspired are hosting a summer book study of Building Mathematical Comprehension: Using Literacy Strategies to Make Meaning by Laney Simmons. I want to read that, too!

With all that I’m currently reading, want to read, and have finished reading, I needed a way to keep track of all these awesome books. Then I remembered GoodReads (this is very distinct from the GoodReader app that I’ve blogged about before).

GoodReads is a social media site focused on reading. I first started using it in 2010 after I finished reading The Book Whisperer by Donalyn Miller (if you haven’t read this book, it is a must-read).

She referenced the site in the book, and I used it through my computer for quite a while. Eventually, as I got busier, I started using it less. I recently got an email update about a friend who was using it, however, and it reminded me that I should revisit the site. My how GoodReads has improved since I used it last! First, GoodReads has mobile apps now to help you keep your reading interests up-to-date.

Now, I’m not such a bibliophile that I need to give status updates of what I’m reading non-stop. But these mobile apps have a fabulous feature that I love: a scanner. (Here’s the view of the app from my iPad. The iPhone version is very similar.)

The scanner allows you to scan the barcode on books and then add it to a virtual shelf. Your GoodReads account has 3 default shelves: read, currently reading, and to-read. Shelves are like tags, and you can create your own shelves based on topics or any other organization you’d like. Books can also be housed on multiple shelves at once.

I love using the scan feature to quickly organize the books that I’m reading or plan to read. Given the iPhone app, it’s also a dangerous helpful feature when I go to bookstores and see books that I’d like to read someday. I just scan them in, and it pulls all sorts of data for me about reviews of the book, average rating of the book, page count, etc. For eBooks I’ve purchased that don’t have a scannable barcode, I can also search by title or author.

In addition to using this to manage my summer reading, I expect to use this app more in my classroom library to inventory my collection, identify books that I’ve read or want to read, write recommendations for my students, and so on.

If you decide to give GoodReads a try, feel free to connect with me there. I’d love to connect with other teachers to see what others are reading.

What are some books that you’re planning to read this summer? Any other ideas for ways to use this app? I’d love to hear your ideas in the comments section, and I hope to connect with you on GoodReads!

Happy summer reading!

a friendly stopped by to say hello, at 5000 feet

The video shows a man flying calmly, when suddenly a military fighter appears out of nowhere. After quickly moving the wings up and down in greeting, the plane disappears from the sky at a speed worthy of a video game or a movie

HOME DESIGN FULL OF COLOR AND INSPIRING

It was probably what the designers had in mind when you fill this place with colorful decoration items such as floor cushions, rugs and rustic small packages. Because the white background, these elements stand out and create a pleasant visual contrast. The living room, dining room and kitchen are connected not only physically, but also intelligent design. We love the way the house seems to be decorated according to a fun pattern, which consists of color and youth.

Home Design Full of Color and Inspiring

Home Design Full of Color and Inspiring

Home Living Room Design Full of Color and Inspiring

Home Living Room Design Full of Color and Inspiring

Home Kitchen Design Full of Color and Inspiring

Home Kitchen Design Full of Color and Inspiring

Home Bedroom Design Full of Color and Inspiring

Home Bedroom Design Full of Color and Inspiring

Home Bathroom Design Full of Color and Inspiring

Home Bathroom Design Full of Color and Inspiring

Carbohydrates, good or bad for dieting

Another distinction that some nutritional counselors make is between refined and unrefined carbohydrates. In dieting index weight loss, we prefer to classify carbohydrates as low-, medium-, or high-dieting. However, because you’re bound to hear carbohydrates defined as refined and unrefined, this section discusses how the terminology relates to the dieting index.

Refined carbohydrates are more highly processed than unrefined carbohydrates. Processing includes such activities as cooking, milling, and separating the whole food into parts. Examples of refined carbohydrates are white bread, white rice, most packaged breakfast cereals, donuts, cakes, cookies, bagels, fruit and vegetable juices, fruit drinks, soda, and candy. The list goes on. Refined carbs are usually high-dieting, but some can be low, as in vegetable juice and some fruit juices.

Diet Start

Unrefined carbohydrates are those kept in their natural state. In general, the unrefined carbohydrates tend to contain more fiber. Examples of unrefined carbohydrates are whole vegetables and fruit, whole grains, dried peas and beans, and nuts and seeds. Some foods are processed more than others. For example, fruit juice is not processed as much as fruit drinks. Usually unrefined carbs are low-dieting, but not always, so be sure to check the dieting index listings before you eat them.

Pastas

Even though regular pasta is a highly refined, processed carbohydrate, its dieting value can be low, medium, or high, depending on how you cook it. If you cook spaghetti for only 5 to 6 minutes, its low-dieting. Other types of pasta may need slightly more or less cooking time. If you open a can of prepared spaghetti in sauce, those noodles will have a higher dieting index because they’re mushy.

Cook pasta just until it softens and you’ll be eating a healthier meal. The longer pasta is cooked the more available the starch in the pasta is for quick digestion—exactly what you don’t want.

The Good and the Bad

Carbohydrates aren’t good or bad; the difference is in how you eat them and how much of them you eat. This is one of the reasons why dieting index weight loss works so well. You don’t need to give up your favorite treat food, whether it’s white bread, bagels, or candy bars. But you do need to eat them in such a way that you don’t cause a quick rise in your blood sugar levels, and you do need to watch portion sizes.

The dieting index gives you a way of managing your blood sugar and insulin levels, thus assuring that you aren’t storing fat and also that you continue to lose weight.

One way to do this is to manage your dieting load by meal and by day. You’ll be balancing the low-dieting foods with some high and some medium, and overall, you can keep your insulin levels low.

Now’s the time to give up the notion of bad and good carbs and of fattening and nonfattening carbs. Instead, accept all carbs as okay, based on how you eat them.

And More: A Simple Explanation Why ‘Loot Boxes’ May Be Considered “Gambling”, In Games Like Star Wars Battlefront II, Et Al… [Editorial]

((Portions of this article
may or may not have
information obtained
from this unidentified
Imperial Officer))

Recently, in the game Star Wars: Battlefront 2 (EA, Dice), there was the introduction of “Loot Boxes”. These are purchasable ‘crates’ that can contain multiple items. These items are generated randomly (RNG, Random Number Generation) and are obtainable by using “RealLife™” Money [my superscript as pun] – and therein lies the problem being discussed.

In an attempt to explain it simply on a Steam Forum Thread a few days ago, I posted the comment below. I replicate it here, to share with others, so that this whole ‘issue’ may be understood more fully:

“If I may pop in, to explain the reason why “loot boxes could be considered gambling”; it is due to a few factors:

– There is an RNG factor in the potential items from the Loot Boxes (the items are random, and some items are worth more than others)

– The inclusion of the possibility of utilizing RealLife™ Currency to obtain them.
[Because of this element, more than anything, it could possibly be construed as “gambling”…]

– Because the items (1) can be exchanged in the game for other items that ‘cost RealLife™ Money (2), they are ‘gambling on the possibility’ that they will ‘save money’ if there are better/higher items in the Box purchased (i.e. they will ‘save money’ if the RNG produces higher/better items in the Box; they will not have to buy much more)

Together, all three points mean the game essentially has “gambling” within it…
I assume the reason why some parents are getting upset about it, is that there is a possibility of a Minor using their RealLife™ Money to obtain the Loot Boxes (in any game).

The solution is simple however; remove the possibility of utilizing RealLife™ money to obtain the Chests/Boxes/etc OR the possibility of getting ‘better items’ that will ‘deconstruct into elements that can accrue to get better items’ (“saving money” if the better items appear via RNG) and there is no longer the possibility of it being “gambling”, as it were.”


The above points, along with the fact that the ‘items’ can actually affect a players’ performance (i.e. a person with more items or better items can actually live longer or do more damage than someone without the items), is the sum of the whole problem that is upsetting many gamers, the entire issue becoming aflame in the recent release (Nov.17th) of “Star Wars: Battlefront II”.

Other games (eg. “Team Fortress 2”), handle this concern for the most part by making sure that the items contained in their ‘loot crates’ are only ‘cosmetic items’ (hats, skins, costumes, etc) that do not affect player performance against other human players. It remains to be seen whether the “RNG Factor” involved in such ‘Crates of Loot’ in these other games, like TF2, are going to still become a ‘gambling’ issue, or not.

Hopefully this helps you dear reader, in understanding the issue at hand and why some people are getting ‘up in arms’ about it at this time. 

~Troy from The Game Tips And More Blog

My Trip to New Delhi & Hyderabad Cont………

My 4th OCA was done for an organization in Hyderabad and I experienced something I came across the last time I did an OCA in Hyderabad. Readers of my Blog may recall my last visit to Hyderabad and the post of 10/12/09. Talk about déjà vu it was very similar on this occasion as well, but the difference was that it was led by the senior members of the board, who were eminent individuals in their own right. (I am talking about an attempt by the organization to cover up facts that directly deals with their capacity during the OCA). What made it very unpalatable was that they gave a presentation on the history and activities of the organization and conveniently omitted these facts from the presentation. This to me is a bad sign and a major put off. The irony is that even with these capacity issues the organization is a relatively capable organization and can be developed to do better; and the purpose for the assessment is exactly to identify these gaps so that they may be able to qualify for a grant to develop their organizational capacity.

Other than this the rest of the assignment went as usual and finished the OCA by 4 PM on the 3rd of March. I went directly to the airport to take a flight to New Delhi for the 5th and last OCA. While waiting to board my flight I noticed a very weird thing. The displays at the Hyderabad airport that give flight departure details were giving a lot more information than it is logically required for passengers waiting to board flights. Let me explain; it starts with the information tag against the flights numbers as “Gate Open” and then as time goes by it proceeds to change the tags to “Final Call”, “Gate Closed”, “Boarding” and finally to “Departed”. In my experience this is the extent of the information which can be relevant to any passenger in the terminal and it stays for at least 10 to 15 minutes on the information board and then it is deleted from the board. However in Hyderabad Airport this is followed by another information tag saying “Airborne”; now who needs to know this? Does it mean that if you are late for the flight and that if the flight is not airborne they will put you on it? Don’t think so; as they say “gate closes 15 minutes before departure time”. Further given today’s security climate well-wishers are not allowed in the terminal. So go figure this one out.

Tom Monaghan, founder of Dominos Pizza, and car collector had a lot of cars in his world

The first Domino’s “Javelin” official delivery vehicle being delivered to Tom Monaghan in 1969.

When Monaghan only had a few stores, he had red, white, and blue AMC Javelins for delivery cars.

When he and his brother started out in pizza delivery, they had a beat up ’59 VW bug, and when his brother wanted out of the company/business/partnership… he got the car as a settlement

His dad died when Tom was four, and his mom put the boys into foster homes that didn’t work out, then into a catholic nun orphanage. After 6 years she got her life together and thought she’d be able to care for her sons and found out, she wasn’t parent material, then committed the boys to juvie.

In his teens, Monaghan had been a penniless car buff; then he joined the Marines, went into pizza after his discharge and dropping out of college, acquired a fleet of automobiles, including a handmade Bugatti Royale, the Type 41 1931 Bugatti Royale Berline De Voyage, and the Packard that conveyed F.D.R. to his second inauguration.

Because he liked to fly, and get to meetings about franchisees faster, he bought a Gulfstream jet and a Sikorsky S-76 helicopter.

He had at least 3 annual antique engine shows on Domino Farms, the event featured eighty-six exhibitors of steam and gas engines, related paraphernalia and other contraptions. Also featured were classic cars from the Domino’s Pizza collection, two steam launches including the Olde English ‘D’ owned by Domino’s and a steam powered boat called Steamer Telegraph, owned by the show’s chairman, Jim Monaghan.

 When his pizza franchises took off, he built a 244-car collection, bought the Detroit Tigers, and became the owner of the largest Frank Lloyd Wright collection in the world. He was worth 480 million.

Eventually, he decided to sell everything. He got rid of his cars, yachts, planes, and baseball team, and in 1999, he sold Domino’s to Bain Capital.

one of the cars in his collection was the Barris AMX 400

another was a Model J Duesenberg he bought for a flat million

http://www.hotrod.com/articles/ccrp-0705-amc-amx/
http://mentalfloss.com/article/65604/11-facts-about-dominos-pizza-founder-tom-monaghan-30-minutes-or-less
https://www.newyorker.com/magazine/2007/02/19/the-deliverer
http://people.com/archive/tom-monaghan-vol-32-no-13/
https://www.nytimes.com/1999/02/14/business/taking-the-gospel-to-the-rich.html
https://www.hemmings.com/blog/2011/03/20/sia-flashback-million-dollar-duesy-harrahs-auctions-over-300-cars/
https://www.farmcollector.com/steam-traction/dominos-farms-sponsors-third-annual-steam-engine-show

Ten Risk Factors That Cause Food Reactions (1-5)

The primary cause of most food reactions is incomplete digestion. At almost every meal, we eat foods that we don’t completely digest. The results are disastrous. When we eat foods we can’t digest, we almost always have some type of reaction.

Food that isn’t completely digested can enter our systems in large food macromolecules that cause a great deal of trouble. The body perceives these macromolecules of partly digested food as foreign invaders, similar to bacteria, viruses, or parasites. Then the body attacks them with the full force of the immune system.

This immune inflammatory attack creates the symptoms that you hate: fatigue, weakness, heartburn, aching joints and muscles, nasal stuffiness — and false fat.

There are several factors that most often cause incomplete digestion. To get started on the False Fat Diet, you’ve got to understand these factors and avoid them. In order of importance, here they are.

Risk Factor 1. We eat too narrow a range of foods.

It’s estimated that the average person gets about 75 per cent of his or her calories from just ten different foods. Most of us have our favourite foods, such as wheat and dairy products, and we rely on them far too much. When we overeat any one food, we exhaust our body’s ability to fully digest it.

Diet Start

Risk Factor 2. We eat too many fake foods.

We eat synthetic foods, such as fake fat and artificial sugar, that are manufactured in factories. No wonder we can’t digest this stuff! Furthermore, most of our packaged foods have been crammed with chemicals that human bodies cannot adequately metabolize. Often, a synthetic food has a long shelf life precisely because it can’t be broken down by nature.

Risk Factor 3. We have digestive enzyme deficiencies.

Many people are dangerously low in the enzymes that digest food. Even when these people eat healthy foods, they don’t have enough pancreatic enzymes to break the foods down properly.

Millions of people haven’t been genetically endowed with the right digestive enzymes to thrive on a modern, industrialized diet. For example, African Americans are ten times more likely than Caucasians to lack the enzyme that breaks down milk. Because a lack of enzymes is a common problem, the False Fat Diet generally includes supplementation with specific enzymes.

Another cause of enzyme insufficiency is our failure to ingest the natural enzymes that exist in foods. Many whole, unprocessed foods automatically come with the enzymes that are needed to help digest them, but before we eat these foods, we often kill the enzymes by cooking, processing, irradiation, and storage.

Because it’s important to eat foods with live enzymes still in them, patients on the False Fat Diet tend to eat a lot of fresh, whole, raw foods.

Another critically important digestive substance that millions of people lack is stomach acid, or hydrochloric acid. Unfortunately, production of this acid decreases as we age, which is why indigestion is more common among older people. Many people mistakenly think they have too much stomach acid, because they often get heartburn — but the opposite can be true. Heartburn can also be a sign of low acid. When you don’t have enough existing stomach acid from day to day, your stomach secretes too much when you eat to make up for the deficiency. Later on, I’ll tell you how to fix this deficiency.

Risk Factor 4. We eat food that is too refined.

Too much of our food is stripped of fibre and then shredded, pulverized, powdered — and finally stuck back together again with gluey fillers. By the time we eat it, it’s not much more than a predigested mush of starch and sugar. Unfortunately, this excessive processing often allows the food to rush into the bloodstream before it undergoes the complete digestive process. If this ‘predigested’ food still had its fibre, it would stay in the gut long enough to be fully digested, or it would be carried all the way through the system by the fibre and eliminated. Because of this factor, I urge people to avoid overly refined foods.

Risk Factor 5. We create our own intestinal problems.

One of the most common and harmful of these problems is a condition that allows undigested food macromolecules to slip through the intestinal wall. This condition is called ‘leaky gut syndrome,’ and doctors have only recently realized how hazardous it is. A leaky gut‘s wall is more permeable than it should be.

This permeability can be caused by eating chemical additives and also by drinking coffee or alcohol with meals. If you’ve noticed that you most frequently have food reactions when you have a cocktail with dinner or coffee with breakfast, you may have leaky gut syndrome.

Another primary cause of leaky gut syndrome is overgrowth of the natural yeast Candida albicans. Candida is usually present in the body and is mostly found in the mucous membranes — especially those in the intestines. It normally stays in balance with other healthy bacteria, but it can get out of control and increase gut wall permeability. It proliferates if you:

  • Take antibiotics, which kill all bacteria.
  • Take birth control pills.
  • Take steroid drugs.
  • Eat foods, such as sugar, that cause yeast to multiply.
  • Eat things that contain lots of yeast, such as bread and beer.
  • Have impaired immunity.

Candida is a major cause of bloating and often causes a ‘beer belly’ look. In fact, I think that many heavy beer drinkers with beer bellies aren’t nearly as far as they look, but are just swollen with candida, reactive gas, and fluids. I had one patient who lost his beer belly in a matter of days on the False Fat Diet. He was thrilled with his quick response, and it motivated him to stay with the diet.

TestRun, Quick ‘End Of The World’ Edition Answers: Does SLI Really Make A Difference? and Where Should I Put PhysX for NVIDIA Videocards? (Text-Only Version)


Update: Added more Tests and Results – Hitman: Absolution Benchmark, Unigine: Valley Benchmark, Left 4 Dead 2 Unscripted Gameplay Test, Tribes: Ascend Gameplay Test and Rollercoaster Tycoon 3: Platinum Gameplay Test


Recently becoming the proud owner of another NVIDIA card, I swapped out my trusty AMD/ATi Radeon HD 6870 from ASUS that has served me so well and lovingly joined together two GTX 560 Ti videocards in electric matrimony to try out some SLI. I share now my experiences, the results of many tests and answers to questions I have seen in many places online, including one I had myself.

This is also a ‘Quick’ Edition, a version of the testing and results that are text-only for now, where I may do a full version as time permits in the future, with screen recordings, graphs and other materials that I would like to share and would help people out.

The Experiment

For this TestRun, with two NVIDIA videocards, I try answer the question: “Does SLI really make a difference?” and also “Where to put PhysX?”. Sure, the answer of ‘if it makes a difference’ is answered other places online, with pretty graphs and numbers; but I am one of those people that, although accepting, don’t ‘truly believe’ things unless I can test it out myself. This is a human stubbornness I know, but it also helps me explore many things I would not have otherwise experienced and allows me to share those results and experiences with others. “Does it really double performance?” is probably a more specific question of what I’m feeling, as of course it should make a difference, after all I am putting another 384 processing cores towards throwing around colorful shapes on my screen. I want to know if it even ‘doubles’ the awesomeness of games that I play. There are two cards in there now, so what’s the difference in performance?

Another aspect I plan to explore is regarding PhysX, NVIDIA’s lovechild of bouncing balls and splattering sparks. Does it affect game performance? Which card should run it if I have it on? Is it better to run it on a dedicated card [that only uses it for that] or off of the CPU? These are my own questions as well since finding a second NVIDIA gpu on sale… PhysX is only in a hamfisted-handful of games – and is only going to be found on NVIDIA GPUs, but it is supposed to improve visual/perceived quality in the games that do use it, due to the fancy waving flags, shattering glass and splattering blood [and the like]. I am going to test the options of having it on the first or second SLI card and how PHysX runs off of the CPU, too.

The Test

For this TestRun, I used utilities such as FurMark and FluidMark, Unigine’s Heaven Benchmark and a handful of games to benchmark and test with, such as Just Cause 2, Alien Vs. Predator, Lost Planet 2, Battlefield 3, Unreal Tournament 3 and Batman: Arkham City (all but the first two utilize PhysX). I am currently running an AMD 6-Core CPU and two GTX560Ti’s in SLI mode on a GIGABYTE 990FXA chipset mainboard.
I assume this is still an average-to-above-average system at the time of this writing (perhaps upper midrange but definitely not top-of-the-line) and it would help out anyone with a similar rig in the future as well with examples of some of the performance difference they will see [if they add a second videocard].

The Data

Here are my benchmarking test results and average framerates, comparing SLI mode with a single GPU:

FurMark: Score (2127), Average Framerate (40fps)
FurMark: Score (3959), Average Framerate (65fps) SLI
Lost Planet 2 – Benchmark B: Average Framerate (44fps)
Lost Planet 2 – Benchmark B: Average Framerate (103fps) SLI
Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (28fps)
Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (51fps) SLI
Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (44fps)
Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (90fps) SLI
Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (960), Average Framerate (38fps)
Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (1717), Average Framerate (68fps) SLI

Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1077), Average Framerate (26fps)
Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1741), Average Framerate (42fps) SLI
Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (32fps)
Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (33fps) SLI
(Hitman: Absolution does not appear to take advantage of SLI and/or is not Optimized for it, despite double-checking that SLI mode is enabled and trying to utilize NVIDIA’s ‘Custom Game Profile’ for it, as well – the following two games also do not appear to take advantage of SLI mode)

Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (51fps)
Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (53fps) SLI
Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (17fps)
Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (19fps) SLI




Here are some unscripted, raw gameplay framerates, averaged:
(multiple samples taken of each with FRAPS’ built-in benchmarking utility)

Alien Vs. Predator: Marine Storyline, Average Framerate (47fps)
Alien Vs. Predator: Marine Storyline, Average Framerate (89fps) SLI
Battlefield 3 : Multiplayer with 64 Players, Average Framerate (33fps)
Battlefield 3 : Multiplayer with 64 Players, Average Framerate (61fps) SLI

Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (128fps)
Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (185fps) SLI

*Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (36fps)
*Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (37fps) SLI
[*Game does not appear to be fully optimized currently, article with more detail here:
http://gametipsandmore.blogspot.ca/2012/11/planetside-2-and-ultra-settings-quality.html)


Here are the PhysX tests, done with FluidMark:

FluidMark: Score (5338) single-card mode, PhysX on the card, Average Framerate (87fps)
FluidMark: Score (5449) SLI, PhysX set to (GPU1), Average Framerate (89fps)
FluidMark: Score (7512) SLI, PhysX auto-selected (GPU2), Average Framerate (123fps)
FluidMark: Score (7379) SLI, PhysX set on (GPU2) Dedicated, Average Framerate (121fps)
FluidMark: Score (1291) SLI, PhysX set on (CPU), Average Framerate (21fps)

The Conclusion

So, does putting in a second videocard practically ‘double’ your gaming performance? Dang right it does. Now, I have read that it ‘should’ in many other articles online, but again, I had to test it out for myself. Almost across the board, in every game I threw at it, the performance was almost doubled. Wonderful stuff.

For those about to spend money on a second GPU for SLI because now they know it ‘will definitely make a difference’, I should mention as a Tip here that the more cards you add in (for 3-way or 4x SLI or Crossfire, for instance) the lower the rate-of-return you actually get on the investment.
In other words, adding a third card won’t ‘double the performance again‘ and adding a fourth card won’t ‘double that performance yet again’ –  it won’t even give you 300% and 400% performance [for the third and fourth videocards added]. You will actually see diminishing returns as you add more cards.
Still, if you have enough money for only a second GPU that matches your ‘old’ one, but not enough money to splurge on a new, faster one, clearly SLI/Crossfire is the way to go, it really does make a huge difference.

The PhysX tests are interesting, as they answer a question that I myself was wondering: does it matter whether you set PhysX on GPU1, GPU2 or the CPU, and should a GPU be dedicated to it?

It seems to make sense, that although a powerful, complex 6-core processor, my CPU is nowhere near the raw number-crunching [if ‘simpler’] streamlined data-geyser that the 384-core video card is. The difference can be clearly seen in the results. On the CPU, PhysX calculations [alone/isolated] gave a 23fps output of gushing blood on the screen, while even just one videocard running PhysX by itself put out 87fps of crimson data. Adding another card and telling that GPU instead [of utilizing the first card] to ‘calculate the physics if you please’ took the framerate up to over 120fps. Clearly, NVIDIA is showing that the videocards were made to handle the floating leaves, sparks and bouncing balls of PhysX …and ball handle they did.

What is interesting is the difference that was made, depending on which card you chose to handle PhysX. When the PhysX was set to GPU2 (the card not plugged directly into the monitor in my case), the highest score was achieved. When the PhysX was set to GPU1 (the card plugged directly into the monitor), it scored almost exactly the same as if there was no second card in the system at all. Now, the utility (FluidMark) does test ‘only‘ PhysX and there isn’t much to see on the screen other than some bouncing baubles, but it seems to show that if you put PhysX on the same card that you are using as your display card (that your monitor plugs into), then it might in fact affect performance of that card to display the pretty images on your screen slightly – or at least, to ‘deal with PhysX and show pretty colors on your screen’ at the same time.

Either way, they are both better than utilizing the CPU, as the pitiful performance when on the CPU (at least for ‘mainly PhysX only’ calculations) is over 500% slower than the performance seen when PhysX calculations are put on the second video card, and still calculated at over 400% slower compared to when PhysX is put on the first video card in an SLI setup. Clearly it is better to have PhysX calculations done on a GPU – and perhaps not put it on the main display card if you can.

Testing the ramification of this in actual gameplay, I played some Unreal Tournament 3 and Batman: Arkham City, while juggling the PhysX of both games to be calculated on the CPU, GPU2 and GPU1 (the main display card where the monitor is plugged in). Using FRAPS for collecting benchmark data in Average Frames Per Second, I saw no more than a few frames difference between all modes.
That is, playing with PhysX set to GPU2, PhysX set on GPU1 or putting the PhysX onto the CPU, I saw only a few frames of difference in actual gameplay performance. Mind you, it can be argued that I didn’t see as many sparks, blood, snow or leaves float across my screen at times; but overall, if you are concerned with only “the game performance ramifications” of where to put PhysX, The Answer Is: playing a game, it doesn’t really matter (but the CPU calculates PhysX slower than putting it on any card, as seen in the data).

Overall, if you can’t afford that fast, newly-released videocard you want, but you can afford to get another GPU of the same type as the one you have now – and your motherboard and powersupply can support it – it’s totally worth it to get a second videocard for SLI/Crossfire performance (and if you’re going the NVIDIA route, it doesn’t really matter where you put PhysX).

Have fun upgrading and See You In The Games If The World Doesn’t End Soon!

High-quality protein continue…

Soya’s starring role

Soya is another star player on the protein front, and although it doesn’t have as high a BV as whey protein, meat, fish or eggs, it has a multitude of health benefits which more than justify its inclusion in a low-carb diet; and it is a great vegetarian option.

Soya contains all-important isoflavones, which can reduce insulin levels, decrease arteriosclerosis (thickening of the arterial walls) and lower levels of LDL (Low-Density Lipoproteins, or poor cholesterol). It has also been shown to reduce the risk of osteoporosis (softening of the bones), increase bone mass and enhance the body’s ability to retain calcium.

Diet Start

Soya is also of particular benefit to women, as the isoflavones it contains mimic the action of the female sex hormone oestrogen. It is believed that a diet high in soya can reduce the density of breast tissue, therefore lowering the risk of developing breast cancer.

Make it organic

The quality of the meat and fish we consume has dropped dramatically during the last century. Gone are the days when we were eating meat that came from animals allowed to graze freely on nutritious grass, and fish caught inunpolluted rivers and seas. Today, most farm animals are fed on grains that are high in carbohydrates and omega-6 fatty acids, then pumped full of antibiotics and hormones. And fish are being farmed in restrictive conditions, rendering them more fatty than their wild counterparts.

The only real answer is to buy the best that you can afford – the organic option being the healthiest and most nutritious. Organic is better because the quality of the food is better. It isn’t loaded with drugs and hormones, isallowed to graze naturally, and quite often comes from wild sources, so that the level of omega-3’s is higher, levels of saturated fats lower.

Protein Q&A

Q. Where does whey come from?

A, Whey comes from milk. During the process of turning milk into cheese, the whey protein is separated from the curds.

Q. Why use whey?

A. It contains the perfect combination of amino acids, in just the right concentrations for optimal performance in the body. Both hormonal and cellular responses seem to be greatly enhanced by whey supplementation. If you are trying to increase muscle mass, whey protein is invaluable in building and retaining muscle tissue.

Q. How do I know how much protein I need?

A. Easy-just follow these simple calculations. If you are sedentary you need 0.8g protein per kilogram of bodyweight (0.36g per pound of bodyweight). If you are active, you need 1.4g protein per kilogram of bodyweight (0.64g per pound of bodyweight). So a woman weighing 63kg (1401b) who exercises needs 88.2g of protein per day. A woman weighing 63kg (140Ib) who isn’t active would be fine on 50.4g of protein per day.

Q. Can I have all my protein in one meal?

A. No, it is best to spread it out over the day, so divide it between your three meals and two snacks. You can do this by having eggs at breakfast, a portion of nuts for your morning snack, some fish at lunchtime, a whey protein shake as an afternoon snack, and finally by including a piece of lean meat in your evening meal.

And More: Deal and Sales – Battlefield 4 Expansion, Second Assault is Free from EA – Two Days Left [Notification]

Just a quick mention, for those who didn’t catch it yet or for those who play [or never stopped playing!] Battlefield 4Second Assault, the Expansion pack that adds Four Maps, Five Weapons, Ten Assignments and more, is currently being given away Free from EA/Origin until the 28th – that’s only two days left to go get it!

Battlefield 4: Second Assault Expansion Pack Information Panel
in the “On The House” Section [ Free Games > On The House] in EA’s Origin Game Client (Click to see Full Size)

Note that you need to already own Battlefield 4, as this is an Expansion Pack, but you can still get it now – even if you don’t own BF4 – and play it later. Go and Download it now! GOGOGO

Battlefield 4: Second Assault Expansion Promotional Wallpaper by EA, Unedited
(Click to see Full Size)

See You In The Game!

Quick Tip: Guild Wars 2 – How To Split Stacks Of Items

Just a quick tip for GW2 and those of us who were tying to split stacks of things, only to link them into Chat and ‘shout’ the item’s link to people around us, the entire Map, etc. The way to actually sort things in a more private manner, is to hold down the ALT key and then drag the stack of items to an open slot. A dialog box should come up asking you how you want to split the stack of items (as seen in the example below):

Pressing the Shift key, as most know, will link the item in the chat box, and pressing Control, will link it and shout it out in Chat automagically – which is nice and embarrassing. I’ve seen some random linkages in the Chat Box [of things that aren’t of any interest] so I know it isn’t just me! I hope that this helps someone out and saves them from this atrocious “Faux Pas”…

See You In The Games!

Why you will lose false fat

Donna didn’t look fat, at least not in the leggings and long sweater she was wearing as she entered my office. Her legs looked slender and fit, and her sweater hid the rest. But she felt fat.

`I’ve got a guy’s type of weight problem,’ she said as she sat down. She was animated and energetic, but obviously frustrated. ‘Women are supposed to collect fat in their hips and thighs — aren’t they? — but mine sticks right here.’ She patted her stomach. When she was sitting, I could see that it bulged, even under the thick sweater. ‘I hardly ever overeat,’ she said, `but since I’ve hit 40, I get no forgiveness from my body. It’s like my metabolism took early retirement. I take two bites and I can feel the fat cells around my waist start to expand. Literally. I pinch my love handles, and they’re thicker before I even get up from the table.’ She looked at me expectantly, as if I might not believe her. ‘My last doctor,’ she said with a sour look, ‘told me there’s no way that food could make me fat that fast. But I can feel it happening.’ Again, she searched my face for reassurance. She had an upbeat personality, but she was almost ready to give up. She ate carefully, exercised hard, and still carried 20 extra pounds.

Diet Start

`It’s not your imagination,’ I said. ‘That feeling of instant weight gain happens to a lot of people. But it’s not fat you’re gaining. It’s fluid retention and bloating, and you’re probably getting it from food reactions. A lot of the swelling and bloating from food reactions occurs directly in and around the gut.

That’s why you feel it in your midsection right away.’

`If it’s not fat,’ she said, ‘why doesn’t it leave as fast as it comes? I look like this almost all the time.’

`Your biochemistry won’t allow it to go away, because your body is trying to protect you. When you eat reactive foods, your body sees them as foreign substances, almost as poisons, and it goes all out to protect you. It can take two to three days to stop reacting to some foods.’

Tut it’s not like I eat junk. I’m an old-time you-are-what you-eat type. I was eating granola before they even had a name for it.’ She smiled, but I could see she felt cheated. For many years, she’d followed all the rules — but the rules had been wrong.

`People can become reactive to healthy foods,’ I said, ‘even granola, if you eat it all the time. Do you eat a lot of non-fat and artificially sweetened foods?’

`Now that my metabolism has slowed down, I’ve got to.’

`I hate to say it, but some of those “lite” foods may be doing you more harm than good. If you’re reactive to a food, it can be virtually calorie-free and still make you gain weight. Even diet soda can cause bloating and swelling.’ She looked surprised. Most people these days are so accustomed to counting calories and fat grams — the quantity of their food — that they forget about the importance of quality.

`I don’t think you’re eating too many calories,’ I said. ‘And I don’t think your age is the real problem. Your metabolism is slowing down just 5 per cent every decade, and that’s not enough to cause what you’re experiencing. I think you’ve just developed some food reactions over a long period of time. When you resolve them, you’ll lost your weight.’

Tut I was tested for allergies and they didn’t find any.’ `Did they explain that not all food reactions are allergies?’ I asked.

`No.’

I wasn’t surprised. Most doctors don’t really understand food reactions. They usually have an all-or-nothing attitude; they think that you either have a classic food allergy, with hives and wheezing, or you have nothing at all.

I gave Donna a brief rundown on how food reactions work and how they cause bloating and swelling. I explained it out of respect for her. Some doctors think it’s acceptable to tell patients what to do, without telling them why, but I object to that approach. If patients are willing to change their lives by taking my advice, they deserve to know exactly why these changes will help.

As I gave all the details to Donna, she listened attentively and took notes. Over the next few weeks, she eliminated her false fat foods — one of which was oats, a primary ingredient in most granola — and dropped about 15 pounds.

Now I’ll give you the details on how food reactions get started. Then we’ll look at how they cause bloating and swelling.

If you’re going to make changes in your life, you deserve to know exactly what’s going on.

I’m sure some of this information will hit home. Often, when I tell patients about food reactions, they say, ‘That’s me you’re describing.’

Exercise and Fall Prevention

As people get older one of the biggest threats to their health and independence are falls.  A brief review of the statistics on falls provides a sobering view of the threat.

 Falls are the #1 cause of death as a result of unintentional injury among people 75 and older and the #2 cause of death as a result of unintentional injury among people age 65 – 74.
Falls are the #1 cause of non-fatal unintentional injuries treated in hospital emergency rooms in every age group except ages 15 – 24.
Fall result in the second most expensive worker’s compensation claims with an average cost of $23,929.
One out of every three people older than 65 will fall this year.
50% of the people older than 65 who have fallen will fall again in the next 12 months.
Most falls are unreported (even serious falls) because senior fear losing their independence, and many seniors would rather die than lose their independence.
The treatment of osteoporosis with drugs is very ineffective at preventing fractures because it does nothing to prevent the primary cause of fractures which is falls.
Modifiable Risk Factors for Falls

Strength (in particular lower body and core strength)
Mobility (of ankle, knee and hip in particular)
Fear of falling from previous fall/s resulting in altered gate and restricted activity levels which further increases fall risk
Poor Balance which has three systems (visual, inner ear, proprioception)
Impaired Vision
Cognitive Status/Mood
Environmental Factors (slippery floors, rugs, poor lighting, etc.
Medication Side Effects
Exercise for Fall Prevention
Exercise can help address several fall risk factors including strength, mobility, balance along with improved cognitive status.
The most effective exercise boosts lower body and core strength while including a balance component that can be adjusted to each individual’s current capabilities.   This exercise should be weight bearing whenever possible and functional in nature.
reACT – Rapid Eccentric Anaerobic Core Trainer

One of the finest ways to address the exercise component of a fall prevention program is the use of the reACT Trainer.    The reACT Trainer provides a no impact training stimulus with a self-selected range of motion and allows for progressive balance challenge to fit just about any ability level.  
The reACT Trainer is a functional eccentric trainer meaning it provides eccentric dominant exercise that is highly functional in nature with strong emphasis on integrated functional movements in multiple planes of motion with the ability to adjust movement speed to increase or decrease the challenge level.   It is also a very safe training modality.
For more information on how the reACT Trainer can help prevent falls check out the following videos:
https://www.youtube.com/watch?v=IBjKkvuXrYE&t=213s

https://www.youtube.com/watch?v=WXljK8BbhLg&t=309s– instructional video

My Trip to Bangladesh June 2011. Cont…..

The assignment is now over; managed to progress the milestones without much trouble given that I lost a total of 4 days to strikes. The draft evaluation report was well accepted by the client; now comes the tricky part getting comments on the report. There are basically 2 types of comments that a consultant is likely to get on a report. The first being, comments regarding the structure / formatting and style of the report and some times regarding the language. We have all had different educations and are used to a particular vocabulary; further at some point in our lives we have written a report and we generally stick to that structure while accommodating subject related topics. My rule of thumb is that I give in to these requests as it is just not worth the discussion regarding it. I prefer to use that time for some thing else. The second being, comments regarding the contents such as findings, recommendations etc. Here I generally play hard ball, unless I am presented with an argument backed by facts / proof. This goes to the hart of your position as an independent, unbiased professional consultant. I look forward to these comments as they challenge your thinking and help you to be a better consultant as well. I am supposed to get all the comments by next Friday as the end of the assignment / submission of the final report scheduled after 2 days of receiving all the comments.
During my last week in Dhaka my health deteriorated (food poisoning). My fault for eating some pastries (short eats) offered to me during a meeting. Momentary laps of concentration. . I have been coming to Bangladesh since 2006 and this is the first time this happened to me. My dread was the journey back to Colombo which I made with the aid of Imodium. I know this drug is banned in some countries but it is a life saver when traveling.
I do not have any other assignments lined up at this moment. Now that I am back in Colombo I need to tie up some outstanding issues. These are in fact 3 reports, 1) finalizing the report for the current Bangladesh Assignment, 2) finalize the Strategic Plan for my client in Batticaloa and 3) Submit a reflection I did for myself for the institute of consulting.

Fast DietaryTrack rules

During this first two weeks you need to:

  • Eat about 150g (5oz) of protein per day, which should come from a portion about the size of your palm at each meal, plus two all-protein snacks per day.
  • Eat around 20g of carbohydrates per day. A simple way to work this out is to use a set of measuring cups (a cup holds 250m1/8 fl oz). You should aim to eat approximately 3 cups of low GI vegetables or 2 cups of low GI vegetables and 1/2cup low GI fruit — at least half of which should be eaten raw.
  • Get 30 per cent of your daily calorific intake from fats, which may include: olive oil, walnut oil, grapeseed oil, coconut oil, homemade mayonnaise, flaxseed oil, small amounts of butter, small amounts of sour cream
  • Drink 8-10 glasses of water daily; you can also drink herbal teas, but avoid alcohol, soft drinks, tea and coffee, because caffeine interferes with ketosis
  • Avoid artificial sweeteners, which can stimulate insulin secretion
  • Rev up your protein levels by including at least one whey-protein drink per day
  • Eat enough — otherwise you may start to burn muscle tissue
  • Avoid starchy, carbohydrate-heavy foods such as pasta, bread and potatoes
  • Beware of hidden carbohydrates in sauces and dressings
  • Check the labels of all foodstuffs and avoid all processed foods
  • Not give up!

Diet Start

Dietary Q&A

Q. I have been restricting my carbohydrate intake for days now and I have no energy. I thought this plan was supposed to make me feel better, not worse.

A. Your body is adapting to the metabolic conversion of burning fat for energy instead of glucose. This takes about three days in most people, which is why it is usually best to start the diet over a weekend when you are able to relax more. After three days you should see a rise in your energy levels, but if you continue to feel lethargic or unwell, stop the plan and check with your doctor.

Q. Will I get enough fibre on this plan?

A. Fibre is provided by the inclusion of fibrous vegetables and fruit, and is increased if you eat most of these raw. However, if you experience constipation during the initial stages, try adding psyllium husks or psyllium- husk powder to your whey smoothies, because they comprise 100 per cent soluble fibre. Psyllium husks are pure dietary fibre, composed mostly of cellulose. They swell when they come into contact with water and release

a gelatinous mass (mucilage) which passes through the colon and aids easy elimination.

Q. Why does a lowcarbohydrate diet cause bad breath?

A. When you are on the Fast-Track Plan and restricting your carbohydrates to around 20g (3/40z) per day, you will be burning ketones, which may cause your breath to smell a little unpleasant. Don’t worry, this is easily masked by chewing parsley-oil capsules or by using a natural breath-freshener spray. Make sure that you drink plenty of water because this will help to neutralize the odour.

Paperless Mission #7: Annotating Rubrics with GoodReader (iPad)

This is the seventh post in my Go Paperless! Challenge Series. If you haven’t completed the previous missions, be sure to complete those first.

  • Mission #1: Gather Your Tools
  • Mission #2: Build Evernote Notebooks
  • Mission #3: Email Notes to Evernote
  • Mission #4: Create Checklists in Evernote
  • Mission #5: Organize Your Files in Dropbox
  • Mission #6: Setting Up GoodReader (iPad)
Also be sure to link up at the Go Paperless! Linky.

Mission #7: Annotating Rubrics with GoodReader (iPad)

I try to give my students high-quality feedback whenever possible, especially on their writing assignments. In the past, it would take me days to grade all of their papers and write hand-write comments on their rubrics. So when I passed those papers and rubrics back to students, it would kill me to see students stuff them into the abyss of their backpacks, or worse — toss them into the recycling bin. I wanted them to take it home and share it with their parents, and I wanted them to be able to refer back to that feedback. Eventually I learned to photocopy the rubrics before I passed them back, but that still wasn’t ideal. It created more paper clutter and one more thing for me to work on organizing.
When I say that GoodReader has become one of my all-time favorite apps, I mean it. I now use GoodReader to fill out rubrics and other student feedback. To start, make sure that you have the rubric saved as .pdf in Dropbox. While GoodReader can read any type of document, it will only annotate a .pdf. Then open up the .pdf of the rubric in GoodReader (see previous tutorial).

Choose the highlighter tool to highlight the appropriate categories on the rubric. The first time that you go to annotate a document, it will ask you if you want to save to this file or create an annotated copy. If it’s a document that I’m only planning to use once or student work, I typically select “Save to this file.” When I’m planning to use the document over and over again, though, I’ll create an annotated copy. That’s what I’d choose when using a rubric to grade student work.

Once I’ve made my selection, I’ll be able to annotate all over the document. Once you’re in the highlighter tool, you can drag your finger over the text that you want to highlight. You can change the color of your highlighter, and you can also delete highlights by tapping on the highlighted area.

At the end of the rubric, I like to type specific comments for my students. To do that, choose the typewriter tool. A little window will pop up for you to type your comments, and then it will save them to the document. If it saves it in the wrong spot, simply tap on the text and a new menu of options will appear.

You can drag and drop the text into the correct space and re-size the text area to get it formatted the way you’d like.

 When you’re done annotating the rubric, tap the center of your screen to see the “My Documents” option.

From there, you’ll want to rename your file. To do this, select “Manage Files,” then tap on the annotated copy of your rubric and select “rename.”

Once you’ve renamed your document, you’ll have some options for moving it. First, I send a copy to the student’s notebook in Evernote. To do this, tap “Manage Files” again, select your newly renamed document, and select “Open In.” A new window will pop up asking how you’ll want to save the file. Select “Flatten annotations” because that will preserve your edits and merge it into the document so that you don’t lose your work.

Once you’ve chosen that, another window will open showing which of your installed programs you can open it in. As you can see, I’ve get several options available. You could also upload it directly to Dropbox if you would like to back up your work there rather than in your student notebook. This might be a good option if you have a folder shared with the student for passing back work.

When I’m ready to hand back the rubric to students, I open it in Edmodo and attach it as a direct message to the individual student. This allows the student and his or her parents to see it. They could also download a copy if they’re using a computer. (I’ve had mixed results with document downloads through Edmodo on the iPad.)

This system has been incredibly helpful for me. It’s easy to manage because I don’t have to keep track of paper or make sure that I’ve made enough copies of the grading rubric before I start grading. Just one more step in the quest to curb paper clutter.

What are some other ways you can imagine using GoodReader in the classroom? I’d love to hear your ideas in the comments section!

Multi-Protocol Label Switching (MPLS) continue…

Adding a Label

MPLS is a method that takes the best of both worlds and creates a concept that allows IP packets to travel through the network as if IP were a connection-oriented protocol (which it isn’t). Using special routers called Label Switching Routers (LSRs) does this. These routers connect a traditional IP network to an MPLS network. A packet enters the MPLS network through an ingress LSR, which attaches a label to the packet, and exits the MPLS switched network through an egress LSR. The ingress LSR is the router that performs the necessary processing to determine the path a packet will need to take through the switched network. This can be done using traditional routing protocols such as OSPF. The path is identified by the label that the ingress router attaches to the packet. As you can see, the ingress router must perform the traditional role that a router fills. It must perform a lookup in the routing table and decide to which network the packet needs to be sent for eventual delivery to the host computer.

Internet 2010

However, as the packet passes through the switched network, it is only necessary for the switch to take a quick look at the label to make a decision on which port to output the packet. A table called the Label Information Base (LIB) is used in a manner similar to a routing table to determine the correct port based on the packet’s label information. The switch doesn’t perform IP header processing, looking at the IP address, the TTL value, and so on. It just spends a small amount of time doing a lookup of the label in the table and outputting the packet on the correct port.

When the packet reaches the egress LSR, the label is removed by the router, and then the IP packet is processed in the normal manner by traditional routers on the destination network.

If this sounds like a simple concept, that’s because it is. MPLS still is in the development stages, so you’ll find that different vendors implement it in different ways. Several Internet draft documents attempt to create a standard for MPLS. Other features, such as Quality of Service (QoS) and traffic management techniques, are being developed to make MPLS a long-term solution.

Using Frame Relay and ATM with MPLS

One of the best features about the current design of MPLS is that it separates the label-switching concept from the underlying technology. That is, you don’t have to build special switches that are meant for just MPLS networks. MPLS doesn’t care what the underlying transport is. It is concerned only with setting up a path and reducing the amount of processing a packet takes as it travels through the circuit.

Because of this, it’s a simple matter for an ATM or Frame Relay switch vendor to reprogram or upgrade its product line to use MPLS. For ATM switches, the VPI (virtual path identifier) and VCI (virtual channel identifier) fields in the ATM cell are used for the Label field. In Frame Relay switches, an extra field is added to the IP header to store the label. However, don’t get confused and think that an MPLS network is an ATM network or a Frame Relay network. These switches must be reprogrammed to understand the label concept. It’s even possible, for example, for an ATM switch to switch both ATM and MPLS traffic at the same time. By allowing for the continued use of existing equipment (and

these switches are not inexpensive items), large ISPs or network providers can leverage their current investment, while preparing to install newer MPLS equipment when the standards evolve to a stage that makes it a good investment.

For the long term it’s most likely that MPLS will be implemented using technology similar to Frame Relay instead of ATM. This is because of the small cell size of the ATM cell (53 bytes) combined with a high overhead (the 5-byte cell header). In a small network with little traffic, this 5-byte cell header seems insignificant. However, when you scale this to large bandwidth network pipes, this amount of overhead consumes a large amount of bandwidth given the small amount of data carried in the 53- byte cell. Thus, variable-length frames are most likely to become the basis for MPLS networks in the next few years.

Battlefield Play4Free – PlayTesting The AEK-971 Assault Rifle (One Full Round – Myanmar – Raw Gameplay [Unedited] Video)

Battlefield Play4Free and The Daily Draw

Just a quick primer for those that don’t know; Battlefield Play4Free is a Free-To-Play title, which means it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money. In this game, you do so by purchasing “Play4Free Funds” that you can then use in the in-game Store. There is also a nice feature offered where you can win ‘prizes’ (weapons, armor, clothing, etc) from a game called The Daily Draw at the main Battlefield Play4Free website. You can play once every day, choosing a card from a random draw of eight and the card you choose will be an item ‘underneath’.

The items possible to win range from temporary one-day-use-only weapons and clothing, to seven-day-use ones, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future. The Daily Draw also gives a chance to win ‘Boosts’, where you can earn extra Credits [for instance], as seen in the screenshot below:

The AEK-971 Assault Rifle

I recently won the AEK-971 in The Daily Draw on my Assault class soldier and thought I’d try it out and see how it felt and quickly write a post about it [I call these ‘PlayTests’]. Now, I am not a gun expert or know a lot about the statistics of the guns, so I will mainly be discussing briefly here how the gun ‘feels’ and ‘plays’, especially compared to the default G3A4 Assault Rifle.

The AEK-971 unlocks nice and early at Soldier Level 3, but the main reason for this seems to be that it isn’t supposed to be very different from the Default Assault Class Rifle. As you can see from the comparison above, which is the main Store/Inventory screen information for the weapons, the only real difference is the amount of damage it can do. It has the same accuracy rating as the G3A4, the same range, and the same amount of ammo in the mags. After winning it in The Daily Draw, I played a few rounds with AEK-971 and originally recorded a couple of full matches. Here is one full match, shared unedited for you [a ‘Raw Gameplay’ video], testing out the AEK-971:

I was also testing out the Trial of CyberLink’s PowerDirector 12 for editing.
A Review article about that application – with Tips – Coming Soon™!

Despite not being listed as any more accurate than the G3, I felt more ‘capable’ with the AEK (as though I could ‘put up a fight’ a lot better), probably due to the increased damage. It feels a little more accurate too, even though it isn’t really supposed to be, according to the Store/Inventory info for the gun. So, I figured this is a great time to do some testing! [Yay, tests! lol]

AEK-971 Accuracy Analysis

I did some basic analysis on the recoil pattern of this rifle and it is indeed similar to the default assault rifle, but the AEK is ever-so-slightly more accurate, in my opinion. Here is an example of a test I did, a screenshot of the spread patterns, collecting the bullet markings, below:

Coloured spray paint marking the AEK-971’s Bullet Spread, on average
(Click to see Full Size)
  • The left side is the spread while ‘shooting from the hip’, not using the sights, just standing there holding down the trigger  [the spray painted arrow is red-coloured as in, ‘try not to do this at all if you can, unless in very close quarters combat’]
  • The right side is the spread while ‘zoomed in’, that is, using the sights on the gun (it would use a scope if there was one), still just standing there holding down the trigger  [the spray painted arrow is yellow-coloured as in, ‘try to avoid this’]
  • In the middle is the spread while zoomed in/using the sights, crouching down, still holding down the trigger though – but also now compensating for the recoil of the gun (attempting to contain the spread into a small area) – in this case, slowly pulling DOWN the mouse while firing since the recoil of this gun pulls the barrel UP  [the spray painted box is green-coloured as in, it is recommended to do this (even better if you can tap the trigger instead of holding it down)]

As you can see, even though the rated accuracy for this gun is “Low”, you can get a pretty decent containment of the spread, by kneeling down, using the sights, and compensating for the recoil by moving the mouse accordingly [this little tip helps with all guns].

In most games, you can try to compensate for the recoil of a gun by slowly moving the mouse in the opposing direction to where the barrel travels. For instance, if the recoil pulls the barrel of the gun left, when shooting, moving the mouse to the right then, will cancel out some of the recoil and make for a smaller spread of bullets and easier/faster repositioning for the next shot. Try to remember that each gun will be  different in it’s recoil and which direction you should compensate, when using each weapon though. 
[Note that due to game programmers making bullets ‘miss’ (no matter what), in an attempt to imitate reality (which has imperfections in the gun and bullets, air changes, etc), it will never be possible to fully compensate/correct for the ‘spread’ of bullets in a gun (this goes for most games)]. 



In my tests, the Assault Default G3A4 seemed to pull up and away to the left slightly, when shooting it. Holding down the trigger longer, the gun climbs way up into the sky easily (hence the “Low” Accuracy rating, I assume). For the AEK-971, it does still pull up, but it does not pull to the left in the same way as the G3A4, especially when using the sights. It sort of does a light ‘stepping’ to the left and then to the right, somewhat randomly [whatever the algorithm is in the programming]. This, to me, makes it ever-so-slightly more accurate in the ‘feel’ of the gun, because while it still ‘goes all over the place’ when shooting, it sort of compensates for itself just a bit, and the end result is more of a direct climb up in the recoil, something that felt, to me, easier to compensate for than with the Assault default G3. (I assume this very slight change in the spread/recoil is not enough to win this gun a “Medium” rating in Accuracy, but it is enough to make you have to Level to 3 in order to be able to purchase it..).

Close-To-Medium Range Kill with the AEK-971 in Myanmar. Even with the ‘side-stepping’ that the gun does (and the enemy strafed around as he ran out towards me from behind the rock in the center of the screen) I still got the kill, mostly due to the Very High Damage Rating of the weapon
(Click to see Full Size)

In Conclusion

Overall, the AEK-971 was similar to the default Assault class rifle, the G3A4, when playing. To me, it did feel slightly more accurate, but not by much. If you are having a really hard time hitting people with the G3A4, your accuracy won’t increase very much at all if you purchased this rifle. However, if you are getting used to the default Assault gun, this one packs a lot more punch, and you’ll be getting more kills overall if you upgrade to it. Because I recently won this gun Permanently [during the course of compiling this article, yes it does happen in The Daily Draw! woot] I can’t see the current price for this rifle anymore, to purchase it from the in-game Store; but last time checking, it was only 300 Credits to try it out for one full day. It was also listed as [what I call] ‘Earnable’ because, if you can rack up 45,000 Credits, you won’t have to pay for upgrading to this rifle with any Real Money at all (you can just use the Credits). If you did buy some Play4Free Funds and have 1,250 to spare, you can purchase it at anytime (not having to wait until Soldier Level 3), permanently. So in closing, PlayTesting the AEK-971, I found it slightly better than the Default Assault Class Rifle, even if it only ‘felt’ that way due to the higher damage it does.

Long Range Kill with the AEK-971 in Myanmar. The thin iron sights of the gun (default sights) help a lot with targeting farther away. With the Very High Damage Rating – even though the gun has a Low Accuracy Rating – single-shot/tap shooting can still make it lethal at range, when needed
(Click to see Full Size)

Have fun trying it out for yourself sometime and See You In The Games!

Gameplay Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

Trip to Hyderabad cont…..

The assignments are over and I am on my way home. The drive from Chilakaluripet to Vijayawada was uneventful; so was the flight back to Hyderabad. I had arranged to be picked up and was met at the airport; the drive back from the Hyderabad airport to my guest house was not usual as the vehicle I traveled did not have air conditioning. So my senses were overloaded by the melting pot that is India; the sights, the sounds and the smells greeted me along the way to my guest house. The only disconcerting factor was the pollution levels. The smoke from the vehicles combined with the dust that they kicked up hung as an orangish grey cloud over the city. There were times that I found it difficult to breathe so had to cover my mouth and nose.

On reaching my guest house I packed all my bags and turned in for the night as I had to get up at 3.30 AM to start my last leg of the journey. Before turning in I had spoken to the driver who was supposed to drive me to the air port in the morning. As a matter of caution I obtained his mobile number for contingencies. He faithfully promised to be there at 4.20 AM to drive me to the airport. The plan was that I had to be at the airport one hour before (Domestic flight from Hyderabad to Chennai) and it took one hour to drive to the airport.)the scheduled time of 6.20 AM

The next morning I was ready by 4.20 and SMSed the driver; then came 4.30 still no driver. I got a bit concerned since we had not planned for any delays. So I went to the security post of the compound and hailed the security. As usual the security guard was huddled up in a corner of the security hut fast asleep. I woke him up and found that he did not speak a word of English. So using sign language and my broken Hindi/Urdu managed to convey the situation to him; finally he got on his bike (Literally) and went and woke the driver who slept in the other corner of this large compound.

I left for the airport around 4.50 AM and made it on time for the flight. The rest of the journey went as scheduled and without incident. I am back at home; and finishing all my reporting before the next assignment.

Fallout 4 – “Starting Out: On Settlements, Building, Crafting, Materials And More” – A Beginner’s Guide of Tips and Concepts to Settlement Building and Development [UNDER CONSTRUCTION]

Update: Added images for Main Concepts sections (Food, Defense, etc)
Update: Added steps for How To Assign a Settler to a Work Station/Shop/etc
Update: Added how to Give Yourself Any Building Components, or Food, with Commands (Cheats Section)
Update: Added how to Build past the Size Limit in Settlements (Not a Cheat, Doable on Console as well as PC)

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there is a Steam Sale on now (go get it! heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]




I have been having a ton of fun playing Fallout 4 lately… and while I am taking forever to finish up a ‘First Impressions’ of the game [I keep playing and building up my Settlements instead of writing!], I wanted to share some Tips on handling Settlements; some concepts and ideas that might help new users to the game, players that may not have developed their Settlements very much yet, or players that are looking for ways to possibly improve or increase their Settlements and their Production and associated benefits (Bottlecaps income from Stores, Settlers roaming around and finding/providing you with Supplies, Clinics for healing and removing Radiation, and more).

Screenshot showing the Workshop Area of The Sunshine Tidings Cooperative, Decorated (Work In Progress).
(High Resolution Texture Pack enabled [not 100% sure, sorry, but I think it was at this time]
The Automatron DLC Robot Workbench can be seen, center background. Minuteman Flag seen, left wall, foreground)
Click to see Full Size

[Settlements and their development and growth is one of my favourite aspects of the game, not only because it supplies you with Junk/Scrap/Materials to build with and Money as well, but also because of the ‘life it breathes into the game’… every Settlement becomes ‘alive’ with people coming and going, working and resting, asking for help or talking amongst themselves around you. After getting a few Settlements set up and running smoothly, they become a place to restock, sell and collect, modify and improve gear, rest and maybe enjoy some scenery, taking a break from the action by building and re-working, improving and creating a place of solitude and pride, in each little ‘town’ in The Commonwealth…]

Example of the Workshop Mode interface bar, normally seen at the top of the screen in Workshop Mode (Building mode)
Click to see Full Size 

Here then, are some main ideas to start off with or to keep in mind  – hopefully helpful to fellow gamers who are either starting out in Fallout 4 [from the latest Steam Sale], or are looking for ways to improve their currently-undeveloped Settlements (colour-coded somewhat-by-importance to help separate them for easier reference):

1.  In the very beginning, build Food and Water and Beds, as much as you can.  

These three things (Beds, Water, Food) are the main limiting factors to how many people will come to live in a Settlement. 

 [The maximum amount of people that can ‘live in your town’ is supposed to be your Charisma+10 (so if you have 5 Charisma, that would be 15 people); Provisioners who run Supply Lines (more on them later on down further) don’t seem to count towards this calcuated total (by my experience so far). Also, this limitation is stated in many places online – however, I have Settlements that are much higher than this number (over 30!) so I have not finalized the concept of Settlement Limitation Amount, at this time] 

Don’t worry about Guard Posts and Turrets, at least, as much as you might think at the start – because although they do help with the overall safety of your Settlement; reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in the Raids, and setting a higher Security rating (which seems to affect Happiness, but not Immigration rate – more on Happiness later on…) – you can actually put the responsibility on yourself to take care of Raids at first [and get the bonus experience and loot that comes with it!] by Fast Travelling to the Settlements as soon as you see the ‘Help Defend’ tasks come up – or making ’rounds’ between your Settlements as they are starting up, as Raiders sometimes attack while you are there and you can then help clear them out – and get all the Loot they drop, too! 

[The game leads you towards building Turrets at your Settlements near the beginning, too – in the form of a ‘tutorial’ of sorts, somewhat-early on]


2.  Plant any Food (Corn, Tatos, Mutfruit, Gourds, Watermelon and Razorgrain) you find, at first.

Starting out, you want to maximize your growth, so re-planting food you pick up not only increases how much food a Settlement can produce/feed for the Settlers, it also multiplies how much you can harvest!

You can harvest any plants by ‘picking them’ (hitting the Action key while close to them). You can then immediately re-plant the food you just picked, by entering Workshop Mode and going to the Resources>Food section.

A while later, you can start to Cook with your Food – not only do the meals you prepare have special bonuses (they are all different!) but boiling up some VEGETABLE STARCH, made from all materials that you can gather at any Settlement, is a great way to create your own Adhesive building material. Used for almost everything, Adhesive is a very important material to have!



Vegetable Starch, a source of Adhesive, you can create yourself by cooking together Corn (3), Mutfruit (3), Tatos (3) and using Purified Water (1). Purified Water, you can either find as you travel, cook yourself [3 Dirty Water can be boiled up to make 1 Purified Water], or use Water leftover from your Water Sources in your Settlement – as any extra Water that is not used by your Settlers will be ‘kept by the Settlers in the Workshop inventory’ [in the Workshop Bench]. You need Adhesive for Modifications to Weapons and Armor and even for Building – it is used for almost everything and is therefore very important to keep stocked!




3. Tied for the third most important thing/things to start thinking about, are these two concepts:

    • As you can, increase your Turrets and Guard Posts, to increase the Security of the Settlements, and as stated above, reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in Raids, and keeping your Settlers ‘feeling secure and more relaxed’ (Happier), too. 

    Although the Security Rating of a Settlement (“Defense”) does not effect the speed at which Settlers will immigrate to your little town, the Defense Rating of a Settlement affects the Happiness Rating – which affects how ‘Productive’ the Settlers are in that Settlement (speed of gathering resources, amount of Caps earned, etc) – more on Happiness later on…

    If you have more Guard Posts than you have assigned Guards, they will ‘patrol’ around the Settlement, going between them, back and forth. If you have the same amount of Guard Posts to Guards, they will each stay at one, standing ‘on guard’, most of the time.

    [I personally like to have a couple extra Guard Posts created in my Settlements just to have the Guards move around more… It creates more movement in the Settlements overall and makes them ‘feel more alive’ – something I really like in my Settlements!]

    • Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, “automatically” for you to then use!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time – they will even ‘break down’ the items at the Scavenging Station – and you can watch them do it! 

    [If you have the Automatron DLC/Expansion, you will find that robots Assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    ‘How do you Assign Settlers to Scavenging Stations?’
    Further down, there are Steps with Screenshots for each,
    in the Section “How To Assign Settlers To Work Stations”


    After a while, with more Settlers coming in (sometimes they will migrate to your Settlements quite fast, seeing a solid place to find food, water, beds and have some security/safety), you’ll start to see Junk/Scrap/Materials pile up slowly, even Bottlecaps flowing in, sitting there waiting for you in the Workshops of your Settlements. 

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    Don’t forget to ‘make your rounds’ and periodically travel around to check all of the Workshops, grabbing these extra ‘Caps and ‘Mats, snatching-up the extra Purified Water you’ll see in them, to sell for even more Bottlecaps (especially if you are more desperate for money sometime). Purified Water is created by extra Water production of the Settlement; water that the Settlers aren’t using from the Sources you have set up. This extra Water gets placed in the Workshop for general use and Supply Line provisioning to other Settlements – but since it sells for a decent price and ‘piles up for free’, grab it and Sell it, if you really need ‘Caps!



    4.  As you find more Settlements, start up Supply Lines between them all…

    Supply Lines are ways to ‘share’ the resources of the Workshops between Settlements. You assign a Settler to create a Supply Line between two Settlements, and they then become a “Provisioner”, leading a Caravan between the two Settlements, taking supplies between them so that you can effectively ‘use the Junk/Scrap/Materials/Components of both of them’, no matter which one you are in!

    Supply Lines are started by entering Workshop Mode, then going up to a Settler (one that is Unassigned with no ‘job to do’, or one that you want to make run a Supply Line instead of the job they are currently assigned to) and choosing Supply Line from the bottom menu bar.

    That townsperson will then become a Provisioner, leading a caravan and a wacky Brahmin through the wilds of The Commonwealth… between the Settlement that they originated in and the one that you assigned them to make a Supply Line to.
    Between these two Settlements then, you can utilize any* Junk/Scrap/Components between them, in their Workshops.

    *Note that it appears you cannot share any Weapons or Apparel that you put in [I have not tested Miscellaneous items yet]; you can only share Junk [as of the time of this posting, this may change in a future Update/Patch in the game, of course].

    Requirement: Supply Lines require the Local Leader Perk to be able to ‘organize the people’, which requires a Charisma of 6 – but it has no Level requirement, so you can get it at the start of the game if your Character has a Charisma of 6. If your Character does not have a Charisma of 6, you can also put Perk Points into Charisma as you Level – you get one Perk Point every time you gain a Level – thereby slowly increasing your Charisma to 6, eventually. You can also put on Gear and Clothes that ‘accentuate your Charisma rating’ [eg. Apparel that says “CHR 1”], to get your Charisma up to 6 ‘instantly’!

    [With places like Tenpines Bluff, a Settlement you find somewhat-early on, that has barely any resources at all and barely anything to Scrap for Building Materials – the game seems to even be encouraging you to think about Supply Lines… at least, this is my interpretation..]

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!


    Workshops will create Scrap building materials (Components) for you ‘automatically’ from any Junk Items you store in them – just ‘keep building’ and if you have the Junk that can be broken down into the Components you need, it will do it for you!



    What I mean by the above Tip is, if you put in a bunch of Forks and Knives you have found (for example), and you want to build something in your Settlement that requires Steel to build with, just go ahead and start Building – your Workshop will ‘smelt/breakdown the Junk items (in this example, the Forks and Knives) into Steel’ automatically, so you can essentially ‘use the Fork and Knife to build with’ – you do not need to “drop the items on the ground and then go into Workshop Mode and Scrap the items one by one” to get the Materials from your Junk items to Build; just select your part to Build and it will let you build it – if there is enough “components from junk parts” to do so!

    [I’m not sure if this changed from an early Patch or something, but I see a bunch of people asking in forums, even recently, if there is an easier way to get Scrap (building materials) from Junk items besides manually ‘Scrapping them one-by-one on the ground in Workshop Mode’ – there should have been a better Tutorial for this, in a way, in the game itself; but I hope this information above clears it up and helps people out]

    Remember: 
    Junk Items = Scrap Components = 
    Building Materials!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!
    • Repeated, Scavenging Station concept from above, as a Reminder:

      Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, ‘automatically’ for you!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time.

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    [If you have the Automatron DLC/Expansion, you will find that robots assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    How To Assign Settlers To Work Stations (To Get Them To Perform Jobs In Your Settlement, Such As Running Shops/Stores Or Gathering Items For You To Use)

    Below, are the five simple steps to Assigning a Settler to any Work Station, getting them to utilize it and start contributing to the income of Supplies/Income of the Settlement. In this example, we are going to Assign a Settler to a Scavenging Station:

    1. When you first build/place a Station or Store/Shop or other useable buildings in your Settlement, it will show up as “Unassigned”, in the Workshop Mode interface. All buildings that are Assignable in a Settlement will show a ‘person icon’, in Red, to show that the building has a Requirement that needs to be fulfilled, for it to begin functioning.

    2. Find a Settler that you want to Assign to the Station. This can be a Settler that is already “Assigned” to something (so you can change their Job they are Performing in your Settlement), or a Settler who is “Unassigned” (doing nothing specific). Highlight the Settler by looking directly at them, then press the ACTION button to begin to ‘COMMAND them to do something’…

    Settlers who are Unassigned still gather Junk Items they find while walking around and put them in the Workshop Inventory for use by everyone. However, this happens slower than if they were Assigned to a Scavenging Station (which gives them ‘access to tools’). “Unassigned Settlers” contribute to ‘making people feel uneasy’ in the Settlement – which negatively affects the overall Happiness of that Settlement (resulting in lowered Production for that Settlement). Assign all Settlers to Tasks, or Relocate them to another Settlement (“Move” them), if there are no Jobs/Tasks for them to do.

    3. Go back to the Station/Shop/Building that you want to Assign the Settler to, and highlight it by looking directly at it. Then click the ACTION button to ASSIGN the Settler you just started COMMANDing, to ‘utilize this Station’ (in this example, the Scavenging Station, shown below).

    4. After clicking ASSIGN on a Station/Shop/Building, the ‘person icon’ should change from Red to Green, to show that a person is now assigned to the Station/Shop/Building (for example, the ‘Requirement for the Station to function’ is fulfilled). You should also see a message in the upper-left saying, “This resource is now assigned.” – that’s it! In this example, you have now Assigned a Settler to the Scavenging Station.

    5. If you go back to the Settler, you can check to make sure they are properly Assigned, by looking at them directly in Workshop Mode. They should now show the Task they are Assigned to (in this example, the Settler now shows a “Scavenging Station Icon” (a Buzzard, ‘the scavenger bird’)).

    Perform the above steps whenever you want to Assign a Settler to any Work Station, Guard Post, Shop or Store – the steps are the same, no matter what you need to have Assigned.

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Example of a Crafting Station, which allows you to create or modify items in the game. This is a Weapons Workbench (from Sanctuary), used to Modify found Weapons, adding higher capacity, faster firing rates, more powerful scopes, and more.
    (Click to see Full Size)


    Starting out with Weapons (Similar Concept to Armor, Below)

    In the beginning, other than the best Weapons you can save for yourself to use (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Weapons to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Weapons you find and improve them as you Unlock Perks with your Points (using the Blacksmith skill) – it will also let you find other parts/materials as you ‘break down’ the Weapons you find into typical weapon-type-materials like Steel, Wood, Plastic and Screws – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Example of a Crafting Station, that allows you to create or modify items in the game. This is an Armor Workbench (from Sanctuary, seen in the rain), used to Modify found Armor, adding bonuses like more defense (adding more material to armor), or putting pockets in it (to allow you carry more weight), and more.
    (Click to see Full Size)




    Starting out with Armor (Similar Concept to Weapons, Above)

    In the beginning, other than the best Armor you can save for yourself to use, (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Armor to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Armor you find and improve them as you Unlock Perks with your Points (using the Armorer skill) – it will also let you find other parts/materials, as you ‘break down’ the Armor you find into typical armor-type-materials like Rubber, Cloth, Leather and Steel – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Short Story/Example About Armor: Because I could Modify and Customize Raider Arm armor near the beginning, I gave up the higher-protection “DC Guard Left/Right Arm” armor pieces that I picked off of a poor dead DC Guard, [because it does not seem to Modify-able in the game and] because I ‘knew how to Modify’ the Raider Armor to be POCKETED for higher Inventory/Carry space [you need to ‘learn how’, by putting Perk Points (‘skill points earned every Level’) into Armorer, a Strength 3 skill]. I put the DC Guard Armor in a Dresser at the beginning for the time being, using the ‘Pocketed Raider Arms’ I could Modify, then – a higher Carry Weight Limit is a valuable commodity – especially at the beginning!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Did someone say CHEATS?

    Sick of trudging around The Commonwealth like a Brahmin with two heads cut off, looking for junk to break down into materials to ‘just build’ with? Tired of picking up every piece of Junk you find, trekking in and out of town constantly and thinking “I just want to build up my base…” or “can’t there be an easy way of getting junk” or “there’s gotta be a faster way to get junk”..?


    Then wonder/wander no more – there is a way to instantly get all the materials you want!

    In Fallout 4 [and most Bethesda games], you can type the item you want and how many you want, of any item in the game, into the Command Console. However, you need to know the item’s Unique Identification Number, first (known as the “Base ID” of the item, in Bethesda games). 

    One way to find the Base ID of any item or object in Fallout 4, is to open the Console (by hitting the Tilde key, “~”, usually found next to the Number 1, in the line of numbers across the top of QWERTY keyboards), and clicking on the item or object in the game. It will then show the BaseID of the object at the top/center of the Command Console area.
    For an example; if you wanted to find out the Base ID of that Deathclaw running at you (and since we are in the ‘Cheat Section’ of this article, say… you want to kill it instantly), then you would find out the ID for it by opening the Console (“~”) and clicking once on the Deathclaw (it should be ‘frozen’ by opening the Console), which would show the BaseID of it just below, at the top of the Console area. Now, for this example of ‘killing it instantly’; you just have to type in “kill”, then a space, then type in the BaseID you see on the screen, and hit Enter. BOOM. That Deathclaw that was running at you (and you were unprepared for, full of inventory and unable to run, no doubt)? It’s dead. “First Crack At The Gear!” 

    [Note1: If you try ‘clicking on the enemy, then typing KILL, then just hitting ENTER’ right away; it may not work as desired. You may end up killing yourself… Although those steps do work, they do not seem to work 100% of the time [in my testing], therefore, the Suggestion of doing the steps from just a bit above (“clicking to get the ID, but typing in KILL and the ID number”), is recommended – to save from accidentally killing yourself and having to LOAD…]

    [Note2: The BaseID seems to change [in my testing], as in, when a Deathclaw (from our example above) ‘spawns’ (comes out of the ground), it will have one ID (and it seems to be ‘unkillable’ for a short time), and then when it starts to come at you and attack, it will change to another ID – which can then be used in the Command Console to ‘kill’ it. Also, Base Identifiers may be ‘Procedurally Generated’, which is, automatically and repeatedly created and changed, as a game goes on. Although this does not seem to happen for items like Food and Materials, it does seem to happen with Enemies and Gear (Weapons/Armor) – so be sure to take the steps above when trying to manipulate objects around you (eg. ‘kill’-ing an enemy), finding the BaseID each time, to be sure that there will not be a mistake or missed opportunity, to utilize the BaseID in the Console.]

    Want nearly-infinite food?
    Want nearly-infinite materials to build with?
    Want to ‘just build and not worry about going around collecting Junk (to build with)’? 

    Then wonder/wander no more – here is a way to instantly get all the building materials you want!


    [WARNING/Suggestion: Although getting all of the items you could ever want, whenever you want, to ‘Just Build’ – effectively turning the game into “Fallout 4: The Sims Apocalypse” where you just Build and Decorate and work on keeping your Settlers at bases Happy (not that that’s a bad thing) – it can potentially contribute to making the game ‘less exciting’, as it takes away much of the need to go anywhere or do anything (other than keep your Settlers’ Happiness maintained). This isn’t a bad thing necessarily (I have one Character I created just to play around and learn the Build Mechanics with and have fun just building and decorating..). I only mention this because I would like to Suggest to create a separate Character to do this with, or remember that when the game ‘gets kind of boring’, to create a Character where you ‘don’t cheat at all’, to create suspense/tension within the game. No matter how you prefer to play though, I hope you enjoy Fallout 4 as much as I have – and still do… Have fun!]

    I have some Batch Files for Fallout 4 below, which will allow you to ‘type in to the Console what you want’ [Materials to build with, or Food (so you won’t have to worry about Farming or feeding your Settlers)] and you will instantly have a ton of those items on your character.
    With the Items in them listed in Alphabetical Order, I have one file that is for getting Materials (Scrap/Junk to Build with), one file that is for getting Food (to Eat/Cook with) and one that is for getting huge amounts of both in one shot…

    To use these Batch Files in Fallout 4, simply download the Text file(s) and place them into the Fallout 4 game directory/folder, where the game data/files are.
    [Don’t worry, they are just Text Files, but I give directions on how to make your own further down, if you ‘don’t like to download things unknown very much’.]


    To quickly find the Fallout 4 game files location [in Steam, on PC]:

    Go to the Library section in Steam and Right-Click on the “Fallout 4” listing, choosing ‘Properties’.

    In the Properties window that comes up, click on the ‘Local Files’ tab.

    It shows you what Drive the game is on; but to quickly get to the game files themselves, click on the ‘Browse Local Files’ button, which will open a new File Explorer window (Windows).

    This location is where you want to Save the Text Files to (the ‘Batch Files for Fallout 4’), usually it will have a Path like “SteamLibrarysteamappscommonFallout 4” on whatever Drive/Partition you installed the game to.

    In that folder, Download/Save (or ‘Paste’, if you ‘Copied’ the files from another location) the .TXT files, to be able to call them up from the Command Console in-game. 

    Example of how the ‘Batch Files’ (Text Files) look, after being placed in the Fallout 4 Game Folder
    (Click to see Full Size)
    Here are the steps to use the .TXT-format ‘Batch Files’ once they are in the game directory (shown for the file for getting Food, the file for getting Building Materials, and then the file for getting Huge Amounts Of Everything To ‘Just Build’ if you want...):

    1A. To use the file that gives you 1000 of all types of Food (so you don’t have to worry about Farming or Feeding your Settlers for a long time); type in

     bat allbasefood

     in the Command Console and hit Enter. That’s it!  

    1B. You can now close the Console and you’ll find you have 1000 of every type of Food in the game, on your person.

    1C. Go to a Workshop to Store the Food there (otherwise you will be ‘overburdened’ with all of that Food in your pockets) – you will find the Food items under the AID section in your Pip-Boy, as shown below:

    2A. To use the file that gives you 1000 of all types of Materials to build with (all of the Crafting Components, so you don’t have to worry about going out and looking for and collecting Junk items to Scrap for a long time and can ‘Just Build’, if you want to play that way for a while); type in

    bat allbasematerials

     in the Command Console and hit Enter. That’s it! 

    2B. You can now close the Console and you’ll find you have 1000 of every type of Building and Crafting Material in the game, on your person.

    2C. Go to a Workshop to Store the Materials in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Crafting Components in your pockets) – you can just hit the STORE ALL JUNK button, to do it in one step.

    For the last one, which gives 9001 of every single type of Food AND Crafting Component in the game [maybe I should have named it “IJUSTWANTTOBUILD.txt”], use the steps below:

    3A. To use the file that gives you 9001 Of All Types Of Everything To ‘Just Build’ With (all of the Crafting Components in the game, so you don’t have to worry about going out and looking for and collecting Food OR Junk items to Scrap, for a long time and can ‘Just Build’); type in

     bat allyourbase9k

    in the Command Console and hit Enter. That’s it! 

    3B. You can now close the Console and you’ll find you have 9001 of every type of Building and Crafting Material in the game, on your person.

    3C. Go to a Workshop to Store the Junk Items (Materials) and the Food (from the AID section in the Pip-Boy), in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Every Frelling Thing In The Game For Settlement Building in your pockets).  

    Here is where to Download the Text Files to place into the Fallout 4 directory/folder (the ‘Batch Files’ to use), from the GoogleDrive for The Blog:

    allbasefood.txt file
    allbasematerials.txt file
    allyourbase9k.txt file

    If you don’t like to normally Download things ‘from unknown places/people’ [aren’t we just ‘Friends That Haven’t Met Yet, though, my dear reader?], here is what the Google Drive link looks like when you click on it:

    Still, feel free to Scan the files with your installed Anti-Virus Program(s), or online through something like Virustotal.com (this is actually a good idea to do with anything Downloaded..).

    If you you rather create your own Text Files, to place into your Fallout 4 directory/folder, to run as ‘Batch Files’, to give yourself an amount of these items, instead of fully Downloading the Text Files offered above – then here are the steps to create your own files:

    Is There A Way To Build More, Past The Limit?

    Sadly, there is a limit to how much you can Build in a Settlement – indicated by the SIZE bar in the Upper-Right corner of the screen in Workshop Mode. While this limitation is there to stop us from building so much that it makes the game go down to 1fps in that area, the SIZE limit is pretty conservative [in my opinion] and I found out that there is an easy way to ‘Build More’ – getting past that Build Size Limitation….

    When you see the message, “Nothing More Can Be Built.”, you can just press your lips together and blow, making that weird trumpet sound, after reading the steps below. No Limitations for you! Just follow these steps and you can continue to Build in that Settlement:

    (Note that this is not a Cheat, it does not affect Achievements and it is doable on Console as well as PC)

    • Get some Weapons together on your Character (specifically Guns, as this specific technique does not appear to work with Melee or Thrown in my testing). Apparel and Junk does not work for this either.
    • Bring up the Pip-Boy and Drop the Guns on the ground
    • Close the Pip-Boy and enter Workshop Mode (by Activating the Workshop Bench or holding ‘V’ (on PC) to open Workshop Mode)
    • Look down at the Guns on the ground and STORE them in the Workshop Inventory (careful not to SCRAP them, that is not what we are doing here at the moment!)
    • You should now see your SIZE bar going in reverse and it will even change from Red to Yellow to Green. BOOM. More Room To Bloom. 

    That’s it! You can now build more in that Settlement. Enjoy! If you want to retrieve your Weapons, you can just go into the Workshop Inventory (“Transfer”) and get them back – which means you can repeat these steps over and over, as needed! (Don’t forget to Share your Screenshots on Steam or elsewhere – other people want to see what you can do – and it gives them new ideas, too)

    Although it is possible to get past the Build Limit by simply dropping ‘any item’ and Scrapping it [I recently learned this on the Steam Forum for Fallout 4], this is still not what I was trying to do, with the Steps above. My intention was to STORE the Guns, so that they can still be utilized later – selling them for Bottlecaps, or ‘Breaking Them Down’ and taking their Modifications off to use on other Weapons, or just using them as Weapons in the game on the Character (or given to Settlers to help them fight off Raids/Attackers) –  that is why the Steps above utilize my method. Storing the Guns allows you to continue to use them (as opposed to Scrapping them into Components to Build/Craft with).



    [……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful, for either starting out in the game or improving your Settlements (there are more advanced concepts to come….. Have fun with Fallout 4!]

    Georgia Bloggers Blog Hop

    It’s time to teach the country about yes ma’am and ya’ll.
    Down here in Georgia, we talk with a drawl.
    We’re bringing you some freebies as sweet as our tea.
    Enter our contest, you might get some things free!


    I moved to the Atlanta area eight years ago when my husband decided to go to law school at Emory. It didn’t take long for us to decide that we’d say goodbye to the cold Michigan winters and make Georgia our permanent home. 


    We eventually settled in Decatur, a quaint suburb of Atlanta, and we love our little town. Decatur has more festivals than any town I know, and we have a thriving downtown with local shops, concerts, and amazing restaurants. We’re minutes from downtown Atlanta, but we’ve somehow captured a small town feel, and I love it. 

    Image of Concerts on the Square in Decatur via visitdecaturga.wordpress.com

    This weekend, we’ve paused from our peach picking to give you a taste of Georgia. Twenty-five teachers invite you to take a road trip through our southern state. Hop through our blogs to get freebies.
                                              
    This weekend only, I’m giving away my Standards for Mathematical Practice posters from TpT for FREE! You can pick up mine just by clicking here. 



    My entire TpT store will also be 20% off this weekend only — June 20-22, so check it out! 

    We’d also like to give you a chance to win a bushel basket full of our products. To enter from my page, you just need to follow my blog on Bloglovin’. Already do that? I’d also love for you to follow by email in the link at the top! You can enter once from each person’s blog.

    a Rafflecopter giveaway

    a Rafflecopter giveaway

    So what are you waiting for?! Time’s a wastin’. Go get more free stuff and sign up to win!

    An InLinkz Link-up

    And More: Deals and Sales – Guild Wars 2 is $24.99 Right Now

    Woohoo! I have no idea when it started and no idea when it will end, but I just saw this with my own two eyes… if you are looking for one last reason to get GW2, it is now on sale for just under $25 American Dollars. That’s about £15 British Pounds if you are from the UK, руб890 Rubles if you are from Russia, 1500 Rupees if you are from India and what works out to be about $10,000,000 Canadian Dollars:

    I just might get my own copy finally and be able to stop begging others to play theirs (you know who you are)… Go to http://buy.guildwars2.com/ to get it while it’s On Sale and See You In the Game!

    Paperless Mission #9: Setting Up Your Class with Evernote

    This is the ninth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

    Mission #9: Set Up Your Class with Evernote

    Today’s mission assumes that your class has easy access to technology. I teach in a 1:1 iPad setting, but I realize how blessed I am to have this and how few people — especially at the elementary level — get to do this. For those of you who have less access to classroom technology, I’m including modifications that you’ll be able to use at the end of the article.

    It’s been a couple months since I started drinking the Evernote Kool-Aid, and I’m still loving it. I don’t have to worry about losing papers or information, and it has become my repository for just about everything. For the first time in my professional live, I feel like I’m getting a handle on organization. But then I see this:

    And I’m reminded that just because I’m organized, doesn’t mean that my students are. In fact, all year long my fourth graders have been struggling with keeping track of class notes, transporting work between home and school, and remembering what materials to use to study for tests and quizzes. Part of that unquestionably comes with the age and maturity levels of 10-year-olds, but given how awesome technology has become, I knew there had to be a better way.

    Enter student Evernote accounts. My students used Evernote on their iPads for the last 6 weeks of school, and I’ve been very pleased with the results. Here’s how we set it up.

    Step #1: Register for new Evernote accounts.

    This step can be done on either a computer or an iPad. (My pics will show the iPad view.) Students will need to have an email address in order to complete registration, but this can be tricky with students who are under the age of 13 since many of the students don’t have email yet. One work around that we found was to set up a class email address on Gmail (ex: [email protected]). Then, you can add the “+”symbol to the end of the username along with a string of letters and/or numbers before the “@gmail.com” ending. Evernote thinks all of these are different addresses, but Gmail doesn’t pay attention to anything after the “+” symbol, so everything will go back to the “fakeeberopolis” account. This lets students register without ever giving them an email address.

    I had students put their lunch account numbers after the plus symbol, but names or other number combinations would work too. You just have to have the info after the “+” symbol be unique to each student so Evernote doesn’t think they’ve already registered. 

    I let the students choose their own usernames and passwords, and I had them record those in a safe place so they could share them with parents. Next year, I’m likely to collect the information as well so I can easily help the students recover it. They don’t sign in and out of Evernote usually — they just stay logged in, so many of them forget.

    Step #2: Build Notebooks for the Subject Areas

    My students created notebooks for Reading, Writing, Word Study, Math, Science, and Social Studies. They later added notebooks for their Spanish and Music classes. During the set-up phase, we talked about the differences between notebooks and notes and how to move notes from one notebook to another. Next year, when I start this from the beginning of the year, we’ll also talk a lot about tagging notes to make them easier to find.
     

    Why Student Evernote Notebooks Rock

    1. More instructional time because transitions are so easy. Transitions between subjects used to take us forever because students would forget to grab a notebook or not have all the materials ready on time. Now transitions are just a quick stretch or brain break. They have all of their notes right in front of them already. We’re abandoning the cluttered bins and drawers.

    2. Students are more accountable and prepared. We don’t have to worry about forgetting work at home or getting lost between home and school. It’s all in one place. In addition, students are able to create more comprehensive class notes. If we read an article using GoodReader, students can save it to their Evernote notebook. If we develop an anchor chart as a class, students can take a picture of it and add it to their notes to refer back to long after it’s gone from the classroom display. If they make a model of different types of triangles using toothpicks, they can photograph their work and add in captions later. More learning gets archived than we’d ever accomplish with a paper model.

    3. Everything is portable between home and school. Students don’t get to take their iPads home, but as long as they save their work in Evernote, they can access it from any computer or mobile device. It also means that students aren’t leaving important readings or materials at school when they need to study for a test. I’ve had many frustrated parents complain that their child wasn’t bringing home the right materials to review for tests this year — especially because we don’t use traditional textbooks at my school — and this remedies all of that.

    Another portability example is that I’ve also had students use Evernote as a word processor when they’re working on longer writing assignments because they can pick up their work between home and school. (In the future, I’d like to use Google Drive as their word processor, but until we get there as a school, this is an acceptable alternative.) Once students are ready to turn in a finished piece of writing, they copy and paste it into Pages, clean up the formatting, and turn it in through Edmodo. It has worked brilliantly this term, and I’m seeing much longer, more developed pieces of writing at all stages of the writing process now. I really think the ease of this process has played a role.

    Now that we’re using Evernote regularly in the classroom, I can’t imagine ever going back. While I will miss the massive influx of office supplies (composition books, notebooks, etc) at the start of the next school year, I’m falling in love with the fact that the only things I take home with me each night are my laptop and iPad. Going paperless has been a glorious thing.

    What are some ways you could use Evernote with your students? I’d love to hear about it in the comments section!

    My recommendation: The 3-step dietary programme Do what I did, look the results

    The dietary plans that follow offer simple, nutritious and delicious recipes on a staged regime that should take you from overweight to optimum weight and enhanced well-being.

    The reason many people depend on junk and convenience foods is because they lead such busy lives. Most of the recipes in these plans are quick to prepare, and should be within the capabilities of even the most reluctant cook. There are exceptions: preparing the Chicken Soup will take a couple of hours, but it makes a lot and you can freeze separate portions, ensuring that you can have a nutritious low-carb meal even when the clock is ticking away.

    So blitz your cupboards and discard any foodstuffs that don’t fit the bill. The journey to a healthy, lean body begins here.

    The Plans

    The 3-step programme includes 3 eating plans. The Fast-Track Plan will help you lose weight quickly and give you that all-important boost on a 50 per cent protein/20 per cent carbohydrate/30 per cent fat regime that will initiate benign dietary ketosis. It should last for 7-21 days, after which you are ready to move on to the next stage. Your weight loss should be around 2-5.5kg (4-121b) if you are a woman and 4-7.25kg (8-161b) if you are a man, depending on how long you remain on this plan.

    Diet Start

    During the Keep on Tracking Plan you increase your levels of low-tomedium GI carbohydrates and move into a 35 per cent protein/35 per cent carbohydrate/30 per cent fat regime. You still monitor ketosis and watch how introducing higher levels of carbohydrates affects your weight loss, which should now even out to 0.25-1 kg (1/2-21b) per week.

    The No Backtracking Plan is your eating regime for life. You can gradually introduce fruit and vegetables, grains and pulses from the higher GI ranges, in moderation. It is important to keep an eye on how your body reacts to these and to establish your perfect weight-management level.

    If you are a vegetarian, there is plenty of advice on how to adapt the plans and recipes to suit your dietary requirements. Granted, your choice isn’t as varied as that of a non-vegetarian, but don’t use this as an excuse not to give it a go. If you follow the basic guidelines and make simple changes to the recipes where necessary, you should lose weight and eradicate insulin resistance successfully.

    FOOD TO THROW OUT

    • White flour and sugar
    • Honey
    • Biscuits
    • Crisps
    • Sweets
    • Sugary drinks
    • White rice, bread, pasta
    • Processed foods high in carbohydrates
    • Ready-made sauces
    • Gravy mixes

    Customize the plans to suit your lifestyle and dietary preferences

    The suggested menu plans are not set in stone – they are templates to encourage you to eat the right sort and amount of food.

    If you wish to change a recipe – because you don’t like lamb and would rather have chicken, say – it really doesn’t matter. Just try to use foods of a similar dietary value. When swapping vegetables and fruit, go for ones in the same GI category; try to exchange meat for meat, or fish for fish, in the same amounts. If you change a recipe from meat to fish, you may need to use slightly more fish to give you the same level of protein. For example, 125g (4oz) of poultry or lean meat should be replaced with 175g (6oz) of fish.

    Simplify the recipes

    If you are short of time, or like your food a bit plainer, simplify the recipe. If you don’t fancy Baked Tuna with Tomato and Herbs, adapt the ingredients, ensuring that you still have sufficient protein, carbohydrates and healthy fats – have a tuna salad with tomatoes and dark green leaves.

    On a budget

    If money is short and you find some of the suggested ingredients a little expensive, use some budgetary ingenuity to bring down the cost. Fresh salmon can be replaced with coley or whiting, or even tinned salmon.

    Use the suggested meals as inspiration. In order to manage your weight in the future, you will have to experiment and be prepared to adapt.

    The “Basic Seven” Foods

    1. Green and yellow leafy vegetables. These may be used either cooked or raw, fresh or frozen. They include cabbage, lettuce, broccoli, sprouts, asparagus, spinach, celery, and similar greens. These provide vitamin A to protect eyes and skin and to guard against infection. They also provide iron for the blood and roughage for elimination.

    2. Fruits—at least two each day. One may be an orange or some other citrus fruit. Another may be a banana, tomato, apple, pear, peach, a bunch of grapes, or some tropical fruit. For variety use strawberries, canteloupe, or some type of melon. These fruits provide vitamin C, which is essential for strong blood vessels and healthy gums and teeth. They also provide roughage for better elimination. Fresh fruits are best for these purposes. Heat destroys vitamin C.

    3. Potatoes and other vegetables. Two or more servings should be eaten each day. These include Irish potatoes, sweet potatoes, yams, beets, carrots, parsnips, lentils, onions, peas, beans, soybeans, and many more. Vitamins and minerals are present in all vegetables. Potatoes are a good source, especially when cooked in their skins. Vegetables may be used in various ways. Raw carrots are an excellent source of vitamin A. Vegetables provide bulk, which aids digestion.

    Diet Start

    4. Milk and dairy products. The very minimum for an adult should be a pint a day, or more, and a quart a day for each growing child or pregnant mother. Nursing mothers need even more. The milk may be in fluid form, as whole milk, buttermilk, skim milk, canned or evaporated milk, condensed milk, dried milk, or some form of cheese. One ounce of cheddar cheese is equal to a cup of milk. The milk can be used as a beverage or in cooking, such as soups, puddings, and desserts. Milk is a fine source of protein. It also provides minerals, vitamins, and especially calcium, which is needed for bones, teeth, nerves, and muscles.

    5. Protein foods. Foods that are rich in proteins include beans, peas, soybeans, nuts, peanuts, eggs, meat, or fish. Soybeans are the richest source of proteins known. They are far richer than eggs, liver, kidney, or any other meat products and far less expensive. They have been used in the Orient for many generations. Dried peas, beans, lentils, and peanuts are all similar to meat in food value.

    6. Whole-grain breads and cereals, at least two or three slices of bread and one dish of cooked cereal each day. These are particularly valuable for growing children and adults who work hard. Whole grains include wheat, rice, barley, corn, and other grains. “Enriched white flour” is better than ordinary white flour, but it is still lacking in certain essential elements. Grains and cereals provide calories for energy, as well as vitamins, minerals, and roughage. Whole grains, freshly ground, are best.

    7. Butter, cream, fortified margarine, or other vegetable fats. A certain amount of fat is essential in every diet. Salad oils, olive oil, corn oil, and similar products may be substituted to meet the daily requirements for fat in the diet. Fats provide calories for heat and energy. They yield more than twice as much energy as carbohydrates.

    Other foods rich in fats are egg yolk, vegetable oils, olives, nuts, and soybeans.

    These are the “basic seven” food groups. One or two from each group should be included in the diet of the whole family every day. The quantities need not be large. The wider the variety, the better. Serve each food attractively. Eye appeal is always important.

    In considering the “basic seven,” you will notice that there is no mention of white sugar, spices, or condiments. None of these is essential in the diet. Ordinary white sugar does provide energy, but that is all. There are no vitamins or minerals in refined sugar.

    In addition to these “basic seven” food groups one should include at least six to eight glasses of water each day. Water is necessary for removing wastes from the body. It aids in maintaining a normal temperature and in moistening the air we breathe. We do get some water from our foods, but not nearly enough to supply all our needs. Many who complain of sluggishness, fatigue, and nervous headaches would feel better if they were taking more water. It is best to drink between meals. Drinking water should be pure and free from harmful germs. If in doubt, boil the water before using it.

    Over two thirds of the human body is composed of water in some form or other. This means that a person weighing 150 pounds has more than one hundred pounds of water in his physical make-up. Even the bones are one-third water. Without sufficient water, the blood cannot circulate properly. Nor can the digestive organs work as they should. All the cells need water. This is the remarkable fluid in which myriads of chemical and electrical reactions are taking place all the time.

    A reliable supply of pure water is essential to the life and health of every family. One may live quite a while without food, but not more than a few days without water. There is no substitute for water. It is indeed the liquid of life. Those who follow the “basic seven” in their choice of foods and include a generous supply of pure water need never fear. They will be taking a balanced diet, and they will feel the benefits of good health all their lives.

    Battlefield 1 – DirectX Error “GetDeviceRemovedReason” [Workaround]

    At first, because of the phrasing of the error, I thought it might be Hardware, namely my GPU (Graphics Processing Unit, the Videocard); but since that was working fine with literally, all other games – playing in longer gaming sessions even [and I know for sure that I wasn’t actually physically pulling out my videocard while playing …I think] – I omitted that possibility (for now) and focused on a potential Software approach, which meant checking configuration…

    Looking at the Settings for the game then, I tried reducing everything down to the Lowest Possible Settings; to reduce the load on the GPU and the load in the processing of the game itself. (With lowered settings, there would be less data being streamed from the game, less being extracted from the compressed/encrypted files of the game, less being calculated and drawn, less everything). If there was a problem with how game data was being handled, this might being it to light [note: an issue with integrity of the files would not be detected this way, this is more of a data handling troubleshooting step; integrity of the game files can usually be checked/verified with a Repair/Verify through the game client or if that doesn’t help, a Reinstall of the game usually assures accurate game files (barring Drive/RAM file handling (Hardware) issues – which is another tangent/issue altogether, heh) – screenshot of where to run a Repair/Verify of the game files for BF1, below].

    Example of the Location of where to Repair the game files in the Origin Game Client, showing Battlefield 1 in 2017
    (Click to see Full Size)

    Nope. Crash. Error [which I lost the clean Screenshot of, of course – but a version of it is in the Header for this posting – I will add a clear Screenshot of the error window to this post when I can capture it again, if it occurs]. Hmmm…. Since it was a DirectX error (and I am 93.33-repeating-percent-sure that I did not “remove the video card” while playing..), I tried one last thing. Instead of swapping out the GPU to try with something else (a GPU from a friend’s PC, for example), which is approaching a Hardware type issue; I tried something else: I changed the DirectX level in the game from DirectX 12 to DirectX11 [this may not have been solely ‘my idea’ – although I am sure I would have eventually arrived at it as a troubleshooting step, I looked up this error and found many, many locations and sources of others stating they have this issue and encountered this error and I may have read it somewhere, for it to have come up – merely mentioning because I just don’t want to take sole credit for something I may not have come up with entirely by myself…].

    Example of where to ‘Disable DirectX 12’ and ‘Enable DirectX 11’ in the Video Settings, in Battlefield 1
    [Hmm, this is more of a Workaround than a ‘Fix’ for this issue…]
    (Click to see Full Size)

    Success! I played a good couple of hours this way, with no crashing, closing, freezing, or errors at all – great! After trying it after re-opening the game, rebooting and playing some more, testing it the next day or two after as well, it seemed ‘solidified’; changing the DirectX level/version from 12 to 11 seemed to ‘solve’ the issue [for me, for now].

    I think this is more of a ‘Workaround’ than a ‘Fix’, since it doesn’t solve the issue permanently… there is still something in the game engine or how it communicates with DirectX/Windows/theGPU, which is causing something that is not ‘fixed’ by this step; but, since it does work to get past the issue, I thought I would share, to help others that may be running into this seemingly-popular problem (‘popular’ judging from the queries I found about this issue on both the Battlelog forum and EA Support Forums, spanning a few years now..). I hope this works for you, dear reader, as it seems to have done, for me.

    [Since this is not a true ‘fix’ (I do not know if this is permanent nor do I know the actual source/nature of the issue, therefore I cannot say this is a ‘fix’, imo); I will post this with the title “workaround”…]

    Addendum:

    Other helpful tips/steps that can possibly help, if the above step does not work (and some additional information), can be found in multiple places on the Battlefield and EA forums, such as this list by a helpful poster named STEEiL:
    https://forums.battlefield.com/en-us/discussion/54605/directx-function-error-amd-getdeviceremovedreason-error-in-battlefield-1

    Good Luck – I hope it gets working for you soon – and See You In The Game!

    Battlefield Hardline: Beginning July 15th, A Double XP Boost is Active ! [Notification]

    Just a quick notification to notify those interested in Hardline to note that a Double XP Boost is Currently On! Note that the notification was noted on Battlelog, as of July 15th – unfortunately, I cannot tell at this time if it is a Premium-Only Boost or a Double XP Boost for ‘Everyone’, as I recently subscribed to Origin Access (to test it for one month, to see whether you ‘lose’ patches/etc that you have earned while it is ‘on’, which I will share as soon as I find out). Still, check out Battlelog and see if it is ‘on’ for you! http://battlelog.battlefield.com/bfh/ GOGOGO

    See You In The Game!


    [Update: As of July 20th, the Double XP Boost is now over… See you next time!]

    Popcorn Cart, Warren, Ohio, circa early 1910s

    https://www.facebook.com/neatoldphotos.m.lucas2/photos/a.400823796751664.1073741829.400758923424818/908779272622778/?type=3

    Teenager’s Room Rockstar Design For Real RockStar

    Design of this room is reserved for your child who likes to play music and have a dream to be a rockstar. where in this room like rockstar there are some tools to play music, like a music studio in the bedroom. with a very attractive color design coupled with music playing equipment such as guitar, drums and other. expected to design the rooms in such a way to make your child feel more comfortable at home and hone his ability in terms of playing music

    Teenager’s Room Rockstar or Musician Themed

    Teenager’s Room Rockstar or Musician Themed

    Teenager’s Room Rockstar Design For Real RockStar

    Teenager’s Room Rockstar Design For Real RockStar

    Teenager’s Room Rockstar or Musician Design

    Teenager’s Room Rockstar or Musician Design

    My trip to Delhi and Hyderabad cont…………….

    Today I finished the 3rd Organizational Capacity Assessment (OCA). The first organization was The National Council of Applied Economic Research of India (www.ncaer.org). The second organization was the Indian Institute of Dalit Studies (www.dalitstudies.org.in). The third organization is the National Institute of Public Finance and Policy (www.nipfp.org.in).

    I must say that I have never met a group of such eminent people working passionately as I witnessed in the past 6 days. Most of the people I met for the OCA’s are individually academics of international standing. What struck me most was the passion and the objectivity of their work as well as the humility they show when compared to the major results they have achieved. I wish all not for profit organizations had such an ethos when it comes to measuring there results.

    I have to record the results of the interviews conducted over the last few days as soon as I can as I will be traveling to Hyderabad on the 1st. for the 4th OCA. Tomorrow is the only non working day in this assignment but I guess I will be doing the documentation. Hope I get a chance to finish early so that I can go out for the evening.

    The 1st of March is a holiday in India (festival of colours) and hope I don’t get splashed with coloured powder on the way to the airport.

    Franchisee Profile: Bill and Bob Aicklen

    Franchisee Profile: Bill and Bob Aicklen

    Bill Aicklen and his brother Bob, who is currently based in Texas, will be opening their fifth Workout Anytime gym in May. The brothers opened their first gym in Decatur in November 2009; bought the company’s flagship store in Dunwoody in 2012; purchased the brand’s first franchise location in Douglasville in 2013, and built their fourth store in Rome in June 2013. 

    Bill, 63, received a Bachelor of Arts in philosophy from Old Dominion University in Virginia, and landed his first job in the banking industry working in the operations and financial systems department. From there, Bill moved on to spend the next 30 years of his career in the computer software business, performing various roles including post-sales, training and support. 

    In 2006, Bill decided that he wanted to get out of corporate America and Bob, who was interested in investing in businesses, invited Bill to manage the operations. 

    The first business that the brothers partnered in was an express oil change franchise. They built and operated two stores in Woodstock before selling in 2012 to focus their time and effort on Workout Anytime. 
    How did you learn about Workout Anytime? 
    We were looking for other business opportunities, and Bob came across Workout Anytime on the Internet. A business broker also presented the concept to us. 
    Why did you choose an opportunity with Workout Anytime? 
    From a franchise standpoint, it’s an easy business to get into; it’s simple. There’s not a lot of moving parts and you can staff the gym with just one or two people. Also, we both have strong customer service backgrounds and understand the importance of hiring the right people and providing excellent service. 
    How has business been since joining the brand? 
    We have between 1000-1700 active members at each location. Since we took over the Douglasville store and invested money into upgrading the equipment, we have turned it around. Our club in Rome is based in a small city with very little competition in terms of big name brands, and we have been very successful there. I expect Suwannee to also do well because it’s in a highly concentrated residential area. 
    Are you involved in any charities or community outreach?
    We localize our charity work depending on the club, and we usually donate free memberships for silent 
    auctions. We also partner with Red Cross by allowing them to park their blood drive buses in our parking lots every quarter – the next drive will be in Douglasville at 3pm on May 12. We have also previously put buckets in our gyms for people to donate pet supplies for the Humane Society.

    And More: Deals and Sales – Black Friday Weekend 2013 Deals Are On Now


    I don’t usually talk about current sales/promotions on this site [or haven’t so far], but after seeing all of the sales on out there, I had to make a quick post just to say that there are some great deals on now! 

    Even if you don’t live in the United States (for instance, I’m in Canada [eh]) you can still take advantage of them, as most electronics and entertainment companies are on the Black Friday/Cyber Monday weekend bandwagon, with tons of purchases available online – and it’s all “nuthin’ but good” for gamers… Steam, Origin, Gamefly and other digital gaming distribution platforms are all chock full of great sales, as is Amazon, TigerDirect, MemoryExpress and other local and online hardware stores, allowing you to finally get that Upgrade you’ve been wanting, should you decide to jump on a deal out there.

    Some examples of games on sale are below; but whether you buy a few games this weekend or save your money and just play with the new influx of players in your own favourite online game – I hope you enjoy your weekend and have some fun:

    An example of the Black Friday Weekend Sales for 2013 on Steam

    A small example of the Black Friday Weekend Sales for 2013 on Origin

    An example of the Black Friday Weekend Sales for 2013 on Gamefly

    See You In The Games!

    Speedrun – Hitman: Blood Money – A Vintage Year (Silent Assassin, Pro Difficulty, Suit Only, Targets Only, “No Coins”)

    Messing around trying another Speedrun, this time booting up some good’ol Hitman: Blood Money, “A Vintage Year” level.

    Hitman is a wonderfully crafted, enjoyable game. In my opinion, every single installment in this series has been. People have enjoyed the ‘puzzle-play’ aspects of it, people have enjoyed the gunplay, the stealth. Players have also enjoyed trying to run as-fast-as-they-can through levels that were probably not designed with this intention. Now, Hitman: Blood Money may not win any awards for “realism” in some areas of gameplay, but I personally have something against the concept that an Assassin, wearing a nice suit, most likely a millionaire, is carrying around twenty dollars in pocket change. Heck, I am sometimes annoyed at the jingle in my own pocket of a couple of quarters when I come across them. Thus, my personal aim with this level: to do a Suit-Only, Targets-Only, Silent Assassin, ‘No Coins’ Speedrun (on Professional Difficulty). I am probably not the fastest at this sort of thing, I have only done a couple of intentional Speedruns in the past; but it was still fun to make and I figured it was ‘decently fast’, so I wanted to share. Enjoy!

    Recorded game:  Hitman-Blood Money, First/Third Person Shooter/Stealth/Action
    Recorded with:  Bandicam (Registered Version) @ 1080p
    Recording codec:  MPEG-1 @ 80% Quality (Default Setting), 30fps

    This was actually not as hard as I thought it would be – after finding out that Delgado.Sr is snipe-able up out on his balcony. It was his Son that gave me trouble (as it seems to do with everyone, after a few forum finds on the subject). I started just pushing him down the stairs and also setting up the Barrels to fall on him; but eventually I settled on just a good-old-fashioned-assassin-stand-by: the single bullet to the head. This felt ‘right’, after sniping dear-ol’Dad, anyway. Instead of pushing the Guards at the bottom into the water, I just walked non-chalantly by them, as they didn’t seem to care anyway.
    [On the actual Playthrough, I seem to get some guards’ attention, but I assumed this was for going into the areas I wasn’t supposed to, not for being witnessed killing anyone]

    I also wanted to do things like ‘leave nothing behind’, such as ‘just dropping weapons’ (like the Sniper Rifle) to save time. This sort of stems from the multitude-of-coins thing… Don’t get me wrong by the way, I appreciate the time so many have taken to figure out their own ways to complete Hitman levels by using distractions. I just for some reason [OCD?lol] find it hard to extend my fantasy thinking within the game ‘that far’ – to where a so-called Silent-Assassin-slash-Hitman is always carrying around and actually utilizes enough laundry money to make the homeless cry on every mission. [I didn’t actually mean to rant here, hah] I just think if an assassin wanted to throw anything around to distract guards, it could more realistically at least be a found weapon of some sort, as opposed to a ton of coinage everywhere (pebbles could even make more sense).

    At any rate, whether you use coins (a mechanic that is indeed offered directly within the game) or you don’t, there you have it; not the fastest run [or the most ‘Silent’ lol], but hopefully an enjoyable little watch, nonetheless.

    See you in the games!

    Eat more and more, do you know chemicals in foods blow you appetite?

    In a very real sense, everybody has direct reactions to foods. Direct reactions are reactions caused directly to cells by chemicals in foods. Among the most obvious direct reactions are those caused by alcohol. If you drink alcohol, you are almost certain to experience sedative effects, due to the direct effect of alcohol on your brain cells.

    Often, people with Asian heritage react quite negatively to alcohol, and the common belief is that they’re allergic to it. Technically, though, they don’t have an allergy; they have a sensitivity — because this is a direct reaction, which doesn’t involve the immune system. I believe that it’s clearer and more sensible to say simply that Asians often have a food reaction to alcohol, since food reactions include both allergies and sensitivities.

    Diet Start

    Direct reactions, however, can eventually involve the immune system, because sooner or later the immune system is called in to repair the mess that direct food reactions cause. Therefore, the symptoms of direct reactions can feel much like allergies. Because of this, direct food reactions are sometimes called false food allergies.

    Alcohol has obvious direct actions, but most direct food reactions are more subtle. Often, direct reactions occur when chemicals in foods bind with the cells that produce histamine; these cells are called mast cells. When this happens, it can cause the release of histamine. The food chemicals that are most likely to do this are lectins, which are most often found in wheat, peanuts, and beans. Another cause can be certain partial proteins, or peptides, that are found in tomatoes, strawberries, shellfish, pork, chocolate, and eggs.

    Other foods that often seem to cause direct food reactions are mustard, pineapple, papaya, buckwheat, and sunflower seeds. Ironically, one patient of mine had terrible digestive symptoms, including severe heartburn, and took large amounts of digestive enzymes to help the problem. However, his enzymes were full of papaya, which he later found he was reactive to. When he stopped taking the digestive aids, his digestion improved immeasurably. Moral of the story: don’t trust common knowledge about what’s healthy — trust your own experiences. Everyone is different.

    Other foods that sometimes cause direct reactions are those that contain high levels of natural histamines. Histamines are formed in foods that are allowed to age and ferment. Therefore, histamines are often found in aged cheese, sausage, and salami.

    Other foods that can cause direct reactions are those that contain the partial proteins tyramine, phenylethylamine, and octopamine. These chemicals, like histamines, can cause blood vessels to expand and contract, which causes tissue swelling. In the head, blood vessel constriction and expansion can cause migraine headaches. That’s why people who get migraines often shun the foods that are high in these partial proteins, such as wine, aged cheese, citrus fruit and yeast.

    Another common foodstuff that often causes direct reactions is the artificial sweetener aspartame. Aspartame is mostly composed of the partial protein, or amino acid, called phenylalanine. In some people, it acts directly on brain cells, causing symptoms such as agitation and depression. In other people, it causes blood vessels to contract and expand, triggering migraines. In most people, though, it causes no reaction at all.

    Many people also react to MSG, or monosodium glutamate, with headaches, nausea, dizziness, heart palpitations, and confusion. Others react to various additives, including nitrates, sulphites, and artificial food colours.

    Another name for direct food reactions is pharmacologic reactions. That’s a good description, because it implies an important point: foods, like drugs, are chemicals. Not all drugs are good for you — and not all foods are, either.

    Now let’s look at the last type of food reaction: immune complex reactions. This type of reaction is not well known. But it should be. It can be a killer.

    Foods, like drugs, are chemicals. Not all drugs are good for you, and not all foods are, either.

    Globesity

    THE RISKS FROM OBESITY

    Being overweight can induce:

    ¨ Diabetes (type 2: non-insulin‑dependent)

    ¨ Coronary heart disease and strokes.

    It increases the risks of:

    ¨ Cancer of the colon, prostate, uterus, cervix, breasts and ovaries

    ¨ Gall-bladder disease

    ¨ Musculoskeletal disorders and respiratory problems.

    We live in a world where half the population seems to be obsessed by dieting, while the other half is suffering from starvation and malnutrition. We have no control over the natural disasters that leave millions fighting to find enough food to survive, but why is it that so many people — not just in the Western world, but also in developing countries — are becoming overweight, leading to soaring levels of diabetes, cardiovascular disease and certain cancers?

    We may have made huge advances in technology, but we seem to have lost our connection to nature, and nowhere is this better illustrated than in the food we eat. Our meat is sold in sterile packaging, and contains antibiotics, growth hormones and pesticide residue. We eat (well, some of us eat) fruit and vegetables that are sprayed, waxed, dyed and sometimes irradiated to make them look attractive. The grains that form the bulk of many people’s diets are stripped of their fibre and nutrient content. And the milk we drink is pasteurized.

    Diet Start

    Because there is so much choice, so little time and sometimes so little money, many people choose the convenient pre-packaged or fast-food option, rather than insisting on good-quality, naturally produced, locally available produce. They would rather sit and watch a cookery programme on television while eating a TV dinner or a take-out than get into the kitchen and cook a healthy meal for themselves.

    According to the World Health Organization (WHO), in 1995 there were an estimated 200 million obese adults worldwide, and by 2000 that figure had increased to 300 million. But obesity is not just a problem restricted to adults -25 per cent of children and adolescents in the US are overweight. The problem is beginning to replace malnutrition and infectious diseases as the most significant contributor to ill health worldwide. Obesity is now recognized as a disease in its own right, but one that is largely preventable through changes in lifestyle – especially diet.

    A lesson from dietary history

    For years we have been fed the information that a low-fat/high-carbohydrate diet is the healthiest one for us. The ideal ratio, based on our calorie intake, is 55 per cent carbs, 15 per cent protein and 30 per cent fats. This ratio may work for some individuals, but it certainly isn’t right for everyone, particularly those whose carbohydrate intake is based on the wrong sort of carbs.

    One of the most thought-provoking arguments for reducing the amount and type of carbohydrates that we eat is the story of Palaeolithic people. Genetically, there is very little difference between ourselves and our hunter- gatherer ancestors, although our diet has certainly changed.

    Palaeolithic people were treading the Earth thousands of years before we started to cultivate crops and rear animals for food, and according to scientists they existed on a diet that was primarily protein. Between 60 and 90 per cent of their diet consisted of game animals, eggs, birds, reptiles and insects. The rest comprised green leafy vegetables and berries. Obviously they were leading a far more active life than the average 21st-century human being, but their diet must have been in part responsible for their healthy bones, flawless teeth and good musculature.

    It was only at around the time of the agricultural revolution, about 10,000 years ago, that we started to rely on starchy vegetables such as potatoes and cereal crops for the bulk of our diet, and lifestyles became more sedentary. By 4,000 years ago the effects of the change in diet were beginning to be seen in the human body:

    ¨ There was a reduction in people’s stature

    ¨ Dental decay and malformation of the jaw had become widespread

    ¨ Disease and epidemics were starting to shorten the human lifespan.

    In One Sentence™ – Heroes Of The Storm – Hero Overviews [Very Short Reviews Of Each, Currently Text-Only]

    [In light of the recent ‘Heroes Of The Storm 2.0’ release – even though this was a ‘work in progress’ since I started playing ‘Heroes’ again a bit ago and it is not fully compiled yet – I wanted to get this hopefully-slightly-helpful information up right away for everyone… So here it is – being added to as I complete it but without any Screenshots yet – I am collecting some together and plan to place them in-line within …Soon™]


    Update: Last Added – Arthas on 2017.05.04



    In One Sentence™


    A Heroes Of The Storm

    Hero Thingy Overview  


    By: The Game Tips And More Blog


    Presented in Alphabetical Order, in a Document-sorta-but-not-really format



    [Initially, was invited to the Heroes Of The Storm Beta; but was not able to play much at the time and so I didn’t write about it much back then. I did work on a few articles, such as this one, adding to it the bit that I did play. Only recently (before I knew about “Heroes Of The Storm 2.0”) I got back into this fun game, tallying up my own opinions and favourites, of each and every hero in the game. Seeing “Version 2.0” come along, I felt that, even though I have not fully compiled every singly hero yet, I wanted to share what I did have done, so that everyone – and especially newcomers to the game – could get a quick idea of each Hero and how they played in the game, helping them make a choice as to which one to try. I will be returning to this post and adding more Heroes as I play them… I hope you enjoy these little snippets of info for each one – and See You In The Game!]




    Rating Key (if applicable to Hero, when used):

    * = Heroes I ‘Liked’ (fit my personal playstyle(s), or is unique in some way)

    ** = Heroes that are A Personal Favourite (I myself would play often or ‘mainly’ would use (may not match your individual preferences dear reader, this is just a Personal Rating of mine))






    Auriel = Finding myself playing more offensively than defensively with this Hero, I enjoyed her AOE and healing capabilities.
    Alarak = With skills focusing on mainly attacking Heroes, in the right hands this high-damage-potential Assassin could be quite deadly.

    Artanis * = Another Hero with skills focused on killing other Heroes, Artanis comes with high damage output potential – and although I was left feeling oddly ‘limited’ playing him, Artanis was fun to play overall.

    Arthas = A mobile tank – big, tough, but a little slow [in my opinion] – with some light healing (and the possibility to heal yourself) and some nice offensive moves as well, Arthas can become quite competent in The Nexus.

    Azmodan ** = This large and lumbering behemoth is capable of dealing out huge damage as a “Ranged Specialist” – just be careful as you have fun creating your own armies on the way to dish it out on the enemies’ base, as you are also a ‘heavy target’, so to speak. A Personal Favourite.

    Dehaka * = With deceptively simple gameplay [or is that ‘deceptively difficult’?], high damage output potential – and with the ability to ‘tunnel to any bushes on the map’ instead of a mount [with a cooldown], this Hero has some nice unique gameplay to fiddle around with in The Nexus.

    Diablo = Huge and tough – as he should be – with some care taken and strategy used, this “Melee Warrior” will be a force to be reckoned with.

    E.T.C. * = With strong yet simpler gameplay, ETC and his unique ‘rocker’ attitude is a fun handful of Tauren to Melee with.

    Gazlowe ** = With the ability to plop down temporary turrets and shoot what eventually becomes HUGE DETH LAZORZ – not to mention being able to recover Scrap Parts for mana – Gazlowe The Goblin Engineer, though more complicated than many Heroes, was a joy to play and kill with. A Personal Favourite.

    Jaina * = With straightforward damage and easy gameplay, Jaina The Mage is fun to use and fun to take out other Heroes with …if mages only had Unlimited Mana [in any game]…

    Johanna = Johanna The Paladin is a little more difficult than most melee Heroes – she is far more offensive than defensive as I first thought she might be – with many life-saving capabilities, in the right hands she could be quite a formidable Hero to run with.

    Leoric * = With the unique ability to ‘remain undead’ and re-spawn wherever you desire after a time, along with simple melee gameplay, this Hero was neat to play – in the right hands perhaps this one could do a lot of damage in The Nexus.

    Lunara = With mainly indirect damage (DOT or Damage Over Time), this Hero was difficult to gauge; with the ability to always move faster than most Heroes (not needing a Mount) and her ranged attacks, perhaps in the right hands she could be quite effective.

    Malfurion** = A multi-faceted Support Hero with both healing and offensive capabilities, if you like to play Support in other games (such as an Engineer, or Medic/Cleric), this ambidextrous Hero should be fun for you to play in The Nexus. A Personal Favourite.

    Probius * = If I had to sum up Probius I would say words like ‘difficulter’ (because I say that’s a real word now) …and ‘cool’ …and ‘overpowered’ …and ‘work’ …and ‘cute’ …and ‘fun’ …and…other words like that with ellipsis between them.

    Raynor = With simpler gameplay and the ability to buff any allies around you – along with the possibility of some light self-healing – Rayor the “Ranged Assassin” is a helpful addition to play in The Nexus.

    Rexxar ** = If you’ve ever wanted to handle two Heroes at once, now you can with this ‘hunter-pet’ combination which promises good damage output and a lot of fun – if at a slight cost of easier gameplay. A Personal Favourite.

    Samuro ** = If you like to be stealthy, confusing opponents and striking from the shadows, this is a fun Hero to do all that and more with. A Personal Favourite.

    Sgt. Hammer ** = This spunky Ranged Hero in a Siege Tank has huge long-range capability – if she can be handled with caring hands. A Personal Favourite.

    Sylvanas * = Capable of not only high damage but also ‘converting’ mercenary units to your side, this “Ranged Specialist” also has sleek gameplay and a powerful (translation: annoying to other people) Mind Control ability.

    Thrall ** = Fast melee and a bit of spellcasting – along with being easier to play – makes this Hero a fun brute to run with. A Personal Favourite.

    Tychus = With good offensive capability, this Hero is easy to learn and practice with.

    Valla ** = With fast and smooth gameplay that is fun and easy to get used to – especially if you have played The Demon Hunter in Diablo III as many of the Demon Hunter ‘basic moves’ come into play in The Arena. A Personal Favourite.

    Zul’jin ** = Focusing on Ranged damage and even doing more damage as his health lowers, this Assassin felt like it could take out both Heroes and swaths of mercenaries with ease, thanks to his light self-healing – just don’t get caught surrounded while trying to do the highest damage possible! A Personal Favourite.





    Repeat  of top comment: [In light of the recent ‘Heroes Of The Storm 2.0’ release – even though this was a ‘work in progress’ since I started playing ‘Heroes’ again a bit ago and it is not fully compiled yet – I wanted to get this hopefully-slightly-helpful information up right away for everyone… So here it is – being added to as I complete it but without any Screenshots yet – I am collecting some together and plan to place them in-line within …Soon™]

    The Elder Scrolls Online – “PatchManifestError” In TESO Launcher [Workaround]


    [Text-Only – This post is initially Text-Only, to allow posting this as fast as possible, to help others.
    I may return and add additional graphics/screenshots pertaining to the article… Soon™]


    Just now, I ran into an issue starting up TESO, where the Launcher gave an error message – oddly, it was slightly different than the message my Gamer Wife beside me got – one of us got “Error 210” while the other got “Error 206”. Here is an example of what the Error Message within the TESO Client Launcher looks like:



    Popping into the Steam forum and the Official Bethesda/Zenimax Forum for the game, I saw a number of people mentioning they are getting this too, just today, like me. So, I wanted to come here and post a ‘quick fix’ that can get past the error message and allow fellow gamers, like me, to be able to play the game as quickly as right now, tonight [actually it’s more of a ‘workaround’ than a true ‘fix’, as it doesn’t solve whatever issue is happening with the Launcher/Client/Servers… I will post this as a “Workaround”].

    Similar to an earlier issue with the TESO Launcher I talked about here at The Blog, the ‘workaround’ involves bypassing the Launcher itself and starting up the game manually via the Executable files… The instructions to do this are below.

    For the Steam Version of TESO:

    • Open Steam
    • Right-Click on TESO in the Library and choose Properties
    • Click on the “Local Files” tab
    • Click on the “Browse Local Files” button to show the directory/folder of the game
    • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
    • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game

      For the Standalone Version of TESO:

      • Right-Click on the Shortcut (the icon that runs the game) on the Desktop (or in the Start Menu) for TESO and choose Properties
      • Click on the “Open File Location” button in the Properties of the game shortcut
      • You should find yourself in a Windows Explorer windows, looking at the “Launcher” folder of Zenimax Online
      • Go up one folder level to “Zenimax Online” (click on the Zenimax Online folder in Explorer)
      • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
      • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game)
        That’s it! Now the game should start up and you will just have to Login within the game itself.

        Unfortunately, I do not know what has caused this error, and I have not seen any Official Postings by Bethesda/Zenimax to explain it, as of the time of this writing. Although it appears to be some sort of Server/Launcher error, I cannot say specifically at this time. However, having testing this Workaround on different machines and with both the Steam Version of TESO and the Standalone/Web version of TESO, I can safely say that this should work for you, fellow gamer.

        Hopefully that helps – and See You In The Game!

        The Ten Steps of Body Clock Diet

        The ten steps of the Body Clock Prescription that follow don’t take much time or many resources but they go a long way toward helping you stay healthy if you are well or feel better if you are ill.

        1. Follow the Body Clock Diet. Put protein in your morning meal, snacks and lunch, either by drinking the Rhythmic Shake or by emphasizing high protein foods. Move most of your carbohydrates from breakfast, lunch and morning snacks to the evening.
        2. If you scored high on the insulin resistance test, adhere as rigorously as you can to the Body Clock Diet. Because insulin resistance is at the root of so many conditions, you want to capitalize on your ability to bring down your serum insulin level. Eat the maximum tolerable amount of your protein during the day and save as many of your carbohydrates as possible for one meal in the evening. Craving carbohydrates is your enemy in this regard; you will probably need to make a gradual transition to the level of strictness that I’m recommending. That way, your insulin levels will come down step by step; they will not be screaming for carbohydrates while I’m screaming at you not to eat them.
        3. Excess alcohol and caffeine interfere with circadian rhythm. The definition of excess depends on the person and on the time of day. In the early evening, the effects of alcohol are minimized by most people’s capacity to easily metabolize two to four ounces of liquor over a two- to four-hour period. But efficient alcohol metabolism declines dramatically after 10:00 p.m., making late night drinking particularly disruptive. Avoid caffeine except at around 4:00 p.m., the one time of day when its circadian effects are neutral.
        4. Stay away from diet drinks because they send a false signal to your body. They promise the potential arrival of sugar and then, after engaging your body’s mechanism for raising insulin, let you down when the sugar doesn’t arrive.
        5. Get plenty of full spectrum sunlight in your eyes and on some part of your skin every day. When you expose your eyes to sunlight — and I hope it’s obvious that I don’t mean staring at the sun — do it without wearing spectacles. These days spectacles of all kinds block both the healthy and the injurious types of ultraviolet rays. So get out in the sun, take off your glasses and soak up a moderate amount of sunlight — at least one-half hour near dawn or dusk — every day. This does not require sunbathing, simply being out in the sun. If you live in a northern latitude where the winter days are short and there are lots of rainy, snowy or cloudy days, then consider getting a light box like those prescribed for people with seasonal affective disorder. Expose yourself to the light box for at least a couple of hours every day.
        6. Establish a regular time for going to bed at night and getting up in the morning and get sufficient sleep every night, preferably during the natural period of darkness between sundown and sunrise. While you’re asleep, expose yourself to light as little as possible. If you wake up in the middle of the night to pee, don’t turn on the light. Instead, use a dim flashlight or nightlight to light your way to the bathroom. Even a tiny amount of light at night will squash your melatonin peak. Remember that melatonin is an antioxidant and informational substance whose narrowly timed peak in the middle of the night, following a healthy exposure to light during the day, may be suppressed by ill-timed light. Failure to have a peak release of melatonin at night is like missing a bus that comes only once a day.
        7. Encourage rhythmic harmony by learning to breathe with your diaphragm. When you relinquish control to your diaphragm, your breathing will take on the normal rhythm directed by the unconscious part of your brain rather than the potentially asynchronous rhythm generated by your chest muscles. This works especially well when you engage in stressful activities that make you unconsciously hold your breath. For example, when I am on top of a ladder trying to hammer in a nail that is slightly out of reach and I dislodge the nail, bang my thumb or bend the nail, I stop and say to myself, ‘Baker, stop holding your breath and take a deep one with your diaphragm.’ Then the nail goes right in. The same is true for threading a needle, looking for lost keys, worrying about finding a restroom when you’re downtown with a filling bladder, waiting in line at the bank or driving on the freeway.
        8. Engage in some form of rhythmic exercise at the same time every day, preferably in the afternoon when muscle strength is at its peak and most people perform best. If you can walk, walk. If you can swim, do that, especially if you can find nonchlorinated water to swim in and are strong enough to swim with a good steady rhythm. If you prefer, ride a bike. But whatever you do, remember to breathe in a relaxed way, using your diaphragm, so that the effort of your exercise reinforces rhythmic harmony in your body instead of allowing unnatural chest breathing to interfere with it.
        9. Working out to music takes exercise one step farther by permitting you to synchronize your activity with the beat of the music. Of course, the ultimate refinement of exercising to music is dance. If you are ill and unable to move about, then simply listen to music, but really listen so that the music penetrates your being rather than simply acting as a background to whatever you are doing. Some types of music are more healing than others. I asked Millie Grenough, a music therapist and author of Sing It! Learn English Through Song, what would be the best choice of music for a person with inflammatory illness.3 She said, ‘It can be anything from Mozart and Vivaldi to favorite Broadway tunes, from long-remembered lullabies or Tibetan chants to your favorite song when you were sixteen. The main thing is that it be music the person loves.’
        10. Meditate daily to reinforce and integrate your body’s rhythms. And if you’re ill, use meditation as the platform from which you launch the powerful tool of visualization. When you dance, you put your whole body’s movement into the embrace of something bigger than yourself — the music. When you are fully the captive of the music, you are free to receive its blessing. And every step of the dance is a choice you make to stay with the music.

        WORKOUT ANYTIME on Cincinnati.com

        WORKOUT ANYTIME on Cincinnati.com

        The article was written by Cincinnati Enquirer Business Reporter Bowdeya Tweh and was based on interviews coordinated with Tony Petrocelli and WORKOUT ANYTIME Vice President of Development Randy Trotter. The article begins with details about the opening of the WORKOUT ANYTIME in Montford Heights. The article gives information about the gym and about the company, as well as information on development plans in Ohio.        
        Workout Anytime

        You can view the full article here, and view contact information about WORKOUT ANYTIME’S new gym in Montford Heights here.

        reACT Trainer Total Body Circuit Workout

        One of the best tools we have at our disposal at Workout Anytime is the reACT Trainer.  Staff who know how to use the product properly and teach others to use it can make a great impression on any member or guest and help to differentiate their club from competitors.

        Although the reACT Trainer is a lower body and core trainer it is easy to create full body circuits using the reACT Trainer along with the key upper body movements including:

        Horizontal Press (chest press of some type)

        Horizontal Pull (Row of some type)

        Overhead Press

        Vertical Pull – (some type of vertical pulling movement)

        Here is a sample reACT Trainer Total Body Circuit:

        Number Talks Book Study – Chapter 2

        The farther I get into the book Number Talks, the more excited I am about implementing them next year. This is such a great resource, and I’m only on Chapter 2!

        I’m linking up with Misty at Think, Wonder, & Teach for her fabulous book study. If you haven’t checked it out yet, be sure to visit her because she’s already offering some great resources to support the book (whereas mine are still works in progress!).

        This chapter walks through some of the nuts and bolts of setting up number talks, and it describes how to manage some of the procedures and expectations. One of the sections that really resonated with me in this chapter was about building accountability with the students. So often, there are a few students who are eager to share their mathematical thinking, and there are many others who are willing to sit back and let those students shine. I don’t like pulling sticks with students’ names for something like this, but I also don’t want students to feel like they don’t need to participate. This book offered some great strategies for dealing with that:

        1. Once all of the strategies have been shared, number them and have students show with fingers which one they found to be the most efficient strategy. This will get them thinking about the math involved.

        2. Keep records of the problems posed and strategies used, and label them with the students’ names. I plan to use my iPad to track this. I’ve talked before about setting up student data notebooks on Evernote, and I think that would be the perfect platform to track student participation. I can photograph students’ work and add anecdotal records about what I observe. It would also be easy to share with parents at parent-teacher conferences.

        3. Hold small group number talks throughout the week. As I prepare to transition into more of a math workshop/guided math approach, this seems like a very viable option.

        4. Create and post anchor charts of the different strategies that students are using. The book names a variety of strategies, or you could develop names with your students. Having the charts available to reference could scaffold the less confident students.

        5. Use exit cards. The authors recommend giving each student a notecard. On one side, students should record their solution, and on the other side, they should record a strategy that another student shared that they liked.

        6. Give a weekly computation assessment of 5-10 problems. The selected problems should reinforce the concepts and strategies introduced throughout the week. I can also imagine using an app like Show Me or Explain Everything to assess. These are whiteboard apps that allow students to record audio on top of their drawing. Students could record their solutions and narrate them as if they’re presenting them to the class. This would be another important artifact that could be saved in the student’s Evernote portfolio to share with parents or an RTI committee. If it’s only one problem, most students would be able to complete the task on the app in 5-10 minutes as the video they’d be creating should be less than a minute long.

        I think these accountability measures could be effective in getting students to participate more. Of course, the classroom environment will matter, too, and I look forward to setting those factors in place for my Number Talks this fall.

        In other news, I’m excited to share that I’ll be participating in Sabra’s book study of Word Nerds at Teaching with a Touch of Twang. Word Nerds explores strategies for teaching vocabulary to students, and it’s another fantastic resource. It’s published by Stenhouse, and you can preview the entire book online or you can purchase the book in Paperbook or Kindle edition.

        The book study starts on Thursday and runs throughout the summer. You can see the full schedule by clicking on the image above. I’ll be hosting Chapter 7, and I can’t wait!

        Also, have you joined in the Teacher Toolbox Trio Linky Celebration yet?

        You still have time to link up and be eligible to win a $25 Teachers Pay Teachers gift certificate! The linky celebration will close on Friday night, so be sure to join the fun. My wish list has definitely grown as I’ve seen all of the fabulous resources other teachers are sharing and recommending.

        Battlefield Play4Free – PlayTesting The XM8AR LMG (3 Full Rounds – Myanmar, Dalian) Raw Gameplay [Unedited] Gameplay Video

        Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens (now called Play4Free Funds) that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a random draw of eight and it will generate an item for you.

        The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

        I recently won the XM8AR in The Daily Draw (for one day of use) on my Medic and thought I’d try it out and see how it felt and quickly write a post about it [I’ll call these PlayTests]. I am not a gun expert or know a lot about the statistics of the guns, but I will discuss briefly here how the gun actually feels and plays, especially compared to the Medic default, the MG3 Light Machine Gun. I played a few rounds with XM8AR LMG and recorded the first three full rounds. Here they are, shared unedited for you [a ‘Raw Gameplay’ video]:

        Recorded with: Bandicam @1080p (HD) using the x264/H264/AVC Codec
        Recorded game: Battlefield Play4Free (MMOFPS, a F2P game/Microtransactions)
        Recorded levels/maps: Myanmar (Jungle, Assault), Dalian Plant (Rural Industrial Port, Defense then Attack)

        [YouTube did something with the Aspect Ratio of this video and I had to use a command in the Tags section to fix it. Let me know if anyone has problems viewing this video properly]

        Normally locked until Level 15, the XM8 felt great to use on my Level 10 Medic. It’s ammo box is a little smaller at 60 rounds (vs. the default Medic’s MG3 having 80 rounds), but it never felt ‘cramped for shots’ and didn’t feel like it took too long to reload.

        The XM8AR Light Machine Gun is normally locked and cannot be used until your Soldier is Level 15, unless it is bought outright or won in The Daily Draw. Click to see Full Size

        The nicest thing about the XM8 was the accuracy. You could really tell you were going from the “Low” rating of the Medic Default MG3 to the “High” rating of the XM8AR.

        Comparison of basic stats between the default Medic gun, the MG3, and the XM8AR

        Looking down the sights, the three-prong irons of the front sight are quite thin and easy to line up in the view of the rear sight, which is in the form of a circle. There is only a little bit of a pull up and slightly to the right, but the recoil is very small and easy to compensate for once you get used to it. I even felt comfortable shooting from the hip and at a distance because this gun felt so darn accurate compared to the starting weapon for a Medic.

        The thin front prongs of the iron sight feel easy to line up for targets farther away and the XM8AR feels like it is very accurate, as can be seen by this Headshot from across a courtyard in Myanmar. Click to see Full Size

        An all around great gun, it was fun as hell to use for a day. For only 300 Credits you can try out for a day of play, too. If you have 1250 spare Play4Free Funds you can purchase it permanently. It is a nice accurate gun to run with and may be worth it. Try it out for yourself sometime.

        Have fun and See You In The Game!

        Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

        LUXURY GIRLS BEDROOM DESIGN DECOR STYLE GOOD

        The design of a room can be a major problem in the redesign of your home. The problem could grow if you have to do for a child – a girl in particular. But do not worry, because we had some bedroom design ideas for the creative minds of the people working with the Italian girls.

        LUXURY GIRLS BEDROOM DESIGN DECOR

        LUXURY GIRLS BEDROOM DESIGN DECOR

        They work in an atmosphere of classic charm in a contemporary way through a range of unique colors. Most models adopt a classic style, with good curves and cushions, and a pile of wood painted to create the perfect atmosphere for your little princess.

        LUXURY GIRLS BEDROOM METAL DESIGN DECOR

        LUXURY GIRLS BEDROOM METAL DESIGN DECOR

        LUXURY GIRLS BEDROOM DESIGN IDEAS

        LUXURY GIRLS BEDROOM DESIGN IDEAS

        LUXURY GIRLS BEDROOM DESIGN CONCEPT

        LUXURY GIRLS BEDROOM DESIGN CONCEPT

        It’s Not Just You™: AMD’s Crimson Drivers, Radeon ReLive Not Working At First [Possible Fix]

        Just a quick post before I go to bed here, that I wanted to share about the AMD Crimson Drivers that I got notified about just a bit ago, which included AMD’s “ReLive”, their new Game [and Desktop] Recording utility – ‘built-in’ to their 16.12 Drivers… For those who couldn’t get it working right away (I see posts about it already in the Official AMD Forums), I couldn’t either… And although I eventually did, I wanted to let others know, if you are having issues with it: It’s Not Just You™

        I was already starting to get tired when I saw a notification of the Driver Update – and I had no idea there was a nifty Game Recording ‘app’ incoming with it [I haven’t been reading much lately, I have another Cold for pete’s sake!]. For AMD GPU owners, waiting patiently to see if AMD was going to come out with their own Game Recording utility – it’s here! The future is now!

        Check out AMD’s Video on their ReLive edition of Radeon here: 
        https://www.youtube.com/watch?v=nRSm12lwRe4

        [I really wanted to start Testing it all out tonight, running Benchmarks and collecting Data for a TestRun or a Quality Test with it; but my sleepyness is actually building and getting the better of me, so I better go soon – I wanted to share what I did this evening though, to get it working (for me), before I go…]


        Without going over the few things I tried first that didn’t work (setting configuration, testing with different games, etc), here’s the steps to take that finally got it running, for me:

        • Download the Latest AMD Drivers via their main Website (http://support.amd.com/)
        • Uninstall the main AMD Drivers via the Control Panel > Programs > Uninstall/Change Program
        • Reboot
        • Install AMD Drivers via the Download from their Website
        • Reboot

        That’s it!

        After that, even though I have a 200 Series* AMD GPU at the time of this writing**, I was able to get ReLive up and running, even playing a little bit with the configuration and making a couple of short test recordings, before I came here to write this quick ‘tip’ of what might help get it going for others… It’s a larger ‘step’ (messing with Drivers, as opposed to just messing with Configuration/Settings); but I always like to Troubleshoot from the smallest steps first (eg. changing some settings) to larger steps (eg. re-installing software) to huge steps (eg. OS reinstallation, hardware changes). Thankfully, it started working just fine after only a bit of a ‘larger step’ taken.


        Although with the most recent versions of Windows you don’t always have to Reboot it when making changes, it helps to get everything ‘in order’ in the background, re-initializing all hardware and Drivers fully – which is why many installers/software still get you to do it through their installation programs.

        I plan on putting the Game Recorder through it’s paces, working on a TestRun and a QualityTest, to come in the future here at The Blog – for now though, hopefully ReLive can get up and working for you, too – good luck, and if you are having troubles with it, remember – It’s Not Just You™!

        * The AMD page on ReLive at their main website (http://www.amd.com/en-us/innovations/software-technologies/radeon-software/gaming/radeon-relive) shows only 400 Series GPUs as ‘Officially Compatible’. Although it does not state ‘it will not work with earlier Series’, it is unknown 100% at this time if it is possible, hence my mentioning it above

        ** Disclaimer and Personal Veracity Statement: Although I currently own an AMD GPU, I have owned NVIDIA GPUs in the past and will do so in the future. I have no personal preference between the two, purchasing one or the other as Upgrades depending on my needs at the time and my financial limitations at the time I choose to Upgrade. I have not and will not receive any compensation for mentioning or talking about either companies’ products. I am merely an enthusiastic user (of both).

        1960 Lincoln Continental mk 5 Formal Limousine

        in the above photo, lower left side, you can see the air conditioning vent under the grab bar

        and this cool control panel / radio for the passengers in the back seat to control the partition, radio, and air conditioning level

        and the AC takes up about a 1/3rd of the trunk space

        Fabulous Fiber!

        Everyone has heard that they need to eat fiber, but few people really know what it is and why it is so important.     Fiber is a form of carbohydrate along with sugars and starches.      Unlike sugars and starch fiber cannot be used for energy because it cannot be broken down into sugar.     Starch and sugars both end us as blood sugar aka glucose.
        Starches are simply multiple units of sugar hooked together, and we have enzymes that break them apart so we can use the sugar for fuel.   Fiber is also multiple units of sugar hooked together, but humans lack the enzymes necessary to break it down into sugars so it is not absorbed.    This is very important when thinking about carbohydrate containing foods because they are NOT all the same.
        For example, a glass of fruit juice is essentially a glass of sugar water with some beneficial plant chemicals and in many cases a nice dose of vitamin C.    It can dramatically boost blood sugar, and if you consume too much it can definitely drive weight gain.     While a large serving of brocolli is mostly fiber with little sugar and starch and is also chock full of beneficial plant chemicals, but with almost no effect on blood sugar!
        There are two main types of fiber – soluble and insoluble.    Ideally you want to eat both.   There is also a third type of fiber called “Digestive Resistant Starch” (see https://workoutanytime.blogspot.com/2017/10/digestion-resistant-starch-all-starch.html)
        Soluble fiber, found in foods such as cucumbers, blueberries, and beans, has a gel-like consistency and slows down your digestion.     This helps with satiety (feeling satisfied).    It also slows the break down and absorption of cholesterol and other nutrients like starches and sugar which can help lower cholesterol and control blood sugar.    Some foods with soluble fiber also help feed the good bacteria in your digestive tract.
        Insoluble fiberis found in foods like green, leafy veggies, green beans, and celery.    It does not dissolve to a gel and stays intact as it moves through your colon.   By adding bulk, it helps food move more quickly through your digestive tract reducing transit time.  Insoluble Fiber is sometimes referred to as “roughage”, and it along with soluble fiber can help with constipation.
        Benefits of High Fiber Intake
        Fiber intake is very important for keeping blood sugar levels under control, and studies have shown that people who take in at least 26 grams of fiber per day had a much lower risk of developing Type 2 Diabetes.
        There is also an inverse relationship between fiber intake and heart attack, with research showing that people eating a high fiber diet have a 40 percent lower risk of heart disease.    High fiber diets may also help lower blood pressure.
        Another interesting research finding about fiber is that for every 7 grams of fiber you consume each day your stroke risk is decreased 7 percent.      To put this into perspective this equates to about 2 servings of fruits and vegetables.
        Fiber, and psyllium in particular, can help move yeasts and fungus out of your digestive system which may help prevent them from triggering acne and rashes.
        Fiber can also provide relief from irritable bowel syndrome in many people.
        Fiber intake may also help reduce the risk of gallstones and kidney stones probably through its action in controlling blood sugar.
        Sources of Fiber
        Contrary to popular opinion grains are probably not your best source of fiber.    Unfortunately, non-organic grains are chock full of glyphosate which is pesticide banned in most other countries outside the US because they have no allegiance to Monsanto who produces it.    
        A high grain diet promotes insulin and leptin resistance thereby increasing your risk for Type 2 Diabetes, Heart Disease and Cancer. 
        Better choices of fiber includes Organic Whole Husk Psyllium.     If you use this supplement it is critical to get organic psyllium as non-organic psyllium is heavily sprayed with chemicals.     Other great sources include chia seeds, berries, root vegetables such as sweet potato, peas and beans, mushrooms, broccoli, cauliflower, Brussel sprouts and celery.
        How much fiber?
        Experts recommend that woman eat a minimum of 25 grams of fiber per day and men consume 38 grams per day.     However higher intakes may be more beneficial.     
        It is important to SLOWLY increase your fiber intake and keep your water intake high to prevent potential issues caused by eating fiber without sufficient fluid.
        Low-Fiber Diet
        There are circumstances where high fiber intake is contraindicated and timing for fiber intake relative to drugs and supplements is important.   People with chronic digestive issues may need to remove fiber for some period of time because fiber feeds the bacteria in your gut.    Although as a general rule this is highly beneficial there are circumstances where high fiber intake can feed the wrong microorganisms such as pathogenic bacteria.

        Fiber can also bind certain medications and minerals dramatically reducing their absorption so many drugs and mineral supplements should not be taken at the same time as fiber.

        WORKOUT ANYTIME on Entrepreneur

        WORKOUT ANYTIME on Entrepreneur

        WORKOUT ANYTIME Franchisee Chris Gately was recently featured in an article on Entrepreneur. The article titled, “Franchise Players: This Man Signed His Franchise Agreement While Serving in Baghdad” was in celebration of Memorial Day, Entrepreneur was profiling Veterans in Franchising. In this Q&A, Chris gives his insight to running a WORKOUT ANYTIME franchise.

        You can view the full article here. 

        HOME DECORATING WITH ASIAN STYLE

        Asian themes uses bright and vibrant colors, and thus, it might not always be a good idea to do up the whole house using this theme. It is always better to concentrate on some part of the house and use it as the focal point by decorating it using the Asian theme. There is heavy dependence on texture and color in this theme, and this needs to be kept in mind.

        Home Decorating With An Asian ThemeHome Decorating With An Asian Theme


        Home Decorating Room With An Asian ThemeHome Decorating Room With An Asian Theme


        Home Decorating With An Asian Theme Bed RoomHome Decorating With An Asian Theme Bed Room

        One of the best places to decorate using the Asian theme is the dining room of the house. When the dining room is decorated, one obviously can use the vibrant colors but besides one can also add decorative pieces on the table. One can use things made of bamboo or Chinese utensils which are very famous in the Asian area.

        My Trip to Thailand

        When traveling east from Sri Lanka I generally travel through Thailand and transit in Bangkok. However I rarely get an opportunity to meet the people on the road as I am in a rush of checking in and out of hotels and flights. In April I was in Bangkok for a training assignment and had the opportunity to interact with people in Bangkok. I enjoyed the interaction with shop keepers and street vendors. However, I saw a significant difference in the pulse of the ordinary people. There was a more tense feeling with quite a high degree of uncertainty given the political situation in Thailand. Even though the current Prime Minister has promised to hold elections the majority of the Thais feel that the Army has started a war along the Cambodian boarder to postpone or effectively suspend the constitution again.

        The fight between the “old traditional Thai power base” and the “modern Thai power base” led by Thaksim. Some of the expatriates I met seem to think that Thailand is getting into a situation or a case of “Thailand having an Army that owns the country”; something similar to Pakistan. The Army seems to have a great say in the lives of the Thai people and the politicians.

        Thailand still remains a polite and friendly place to visit, however it seems to have shot itself in the foot regarding the tremendous progress it had made in the economic and democratic frontiers. As I come from a country that has seen decades of civil war I hope that sanity will prevail and the Thai people can sort out their differences and get ahead.

        Workout Anytime in Louisville Business First Inbox

        Workout Anytime in Louisville Business First

        Workout Anytime of Louisville, KY was recently in Louisville Business First. The article features Louisville resident, Bobby Paisley. Paisley brought Workout Anytime to the Louisville market, and has been with the brand for four years now. Bobby has been able to successful build the brand and will be opening his third Louisville location this March. Along with fellow fraternity brother from WKU and Regional Developer Greg Parker, they have built the brand in Louisville and surrounding areas in Kentucky.
        You can read the full article here. 

        Now on Instagram!

        I’ve joined in the Instagram love! You can now find me at Eberopolis on Instagram.


        I started using it on Wednesday, so I’m still new, but I’m making it a goal to post something (usually) classroom-related every day. Be sure to follow me so I can find all of my teacher-friends who are already there!

        Have a great weekend!

        Cut your Protein why no Sugar?

        The case against sugar is a complex one. Besides the fact that refined sugar is a totally unnatural substance that has been stripped of its nutritional value—fiber, vitamins, and minerals—apart from the calories it provides, sugar in concentrated form is very hard on the pancreas. The pancreas, which is responsible for the production of insulin and therefore the regulation of blood sugar and energy levels in the body, has adapted through evolution to deal with a steady flow of glucose in small quantities such as those that result from the intake of complex carbohydrates.

        One of the biggest beauty cons of all is the idea that if you eat lots of protein your muscles, skin, hair, and nails will grow strong and you will stay young. Like the old-fashioned high protein diet for building up athletic strength, it doesn’t work. The human need for protein has been grossly exaggerated. At the turn of the century, respected opinion held that we need between 120 and 169 grams of protein per day. Then Chittenden showed in human experiments that far better performance and health were possible on fifty grams, a much lower amount. Another scientist named Hindhede set the figure at thirty grams. Then Oomen in Amsterdam and Hipsley in Canberra discovered a population in Australia which develop not only full health, but exceptional muscular structure and performance on a diet of merely 15 to 20 grams of protein per day.

        Diet Start

        Later in the United States, the American Research Council’s Food and Nutrition Board agreed on a daily requirement of 70 grams for adults. One member of the board, named Sherman, described how this figure was arrived at. The evidence the committee examined indicated that a much lower amount was needed, somewhere around 35 grams, but there was agreement that if so low a figure had been set there would have been a public outcry, so a corresponding “margin of safety” was decided on and the 70-gram figure was published. But because the scientific basis for the figure was nonexistent, the word “recommendation” was chosen instead of “requirement.” Current recommendations for protein intake hover about the 50-gram mark, although there is strong evidence now that we probably need even less.

        Your body needs amino acids, the constituents of protein, for its metabolic processes, for growth and the repair and maintenance of body tissue. Proteins are made up of twenty-two different amino acids; all but eight of them your body can manufacture itself. These eight, which have to be taken in through your foods, are referred to as “essential” amino acids.

        A large portion of a protein molecule is made up of nitrogen, and one of the important things about taking protein is that it helps keep a good nitrogen balance in the body, so there is as much nitrogen coming into the body as there is leaving it. This balance helps maintain body health and muscle strength, so that you don’t go into what is known as a negative nitrogen balance, when you lose muscle tissue from your body. To keep your nitrogen right, 10 to 15 percent of your total calorie intake should be from protein.

        But when a greater percentage than this of your calorie intake comes from protein foods, then your body goes into a negative mineral balance and you start gradually losing precious minerals and trace elements such as zinc, calcium, magnesium, iron, potassium, and chromium from your system. These nutrients, so easily lost from the body, are vital not only to physical health but also to emotional stability and well-being (more about minerals later). Wachmann and Bernstein of the Department of Nutrition at Harvard University investigated the high protein diet and came to the conclusion that the protein-rich (especially the meat-heavy) diet plays a strong role in the genesis of osteoporosis, a softening of the bones, particularly in women after menopause, caused by the loss of minerals. This is probably because of the high protein diet’s tendency to leach valuable minerals (in this case calcium) from the system. And purely from the point of view of physical beauty, many of these lost minerals, such as sulfur, selenium, zinc. magnesium, and calcium, can make the difference between prematurely aging skin caused by a rapid collagen and elastin breakdown, nails that split, or hair in poor condition, and radiant looks glowing with strength and health.

        Finally, the breakdown and metabolism of proteins in the body lead to the formation of a number of complex by-products such as urea, nitrogen, and ammonia, which can be toxic. These wastes need to be eliminated. This isn’t always easy, and it puts great strain on the liver and kidneys. This is why, on the well-known high protein reducing diets, you are advised to drink large amounts of water in order to water down these poisons and help excrete them.

        Workout Anytime on WBIR-Knoxville Afternoon Show

        WORKOUT ANYTIME on WBIR-Knoxville Afternoon Show. Every Thursday WBIR has a healthy living segment that is sponsored by the Governor and April Nitzsche was the guest for this week on their show. April spoke about how viewers can be healthy throughout the day when they have a few minutes to spare to stay in shape in 2014. April talked about how to live healthy, and offer tips to viewers.  You also can view the video here.

        The weight question

        ‘Those desiring to lose weight should perform hard work before food. They should take their meals after exertion and while still panting from fatigue … They should, moreover, eat only once a day and take no baths and sleep on a hard bed and walk naked as long as possible.’

        Theories on the weight-loss benefits of walking around naked and not bathing have not been proven, but Hippocrates’ other dietary advice isn’t completely off the wall and shows that even 2,400 years ago, the relationship between food intake and energy expenditure was recognized.

        Diet Start

        Today ‘obesity’ is becoming universally recognized as a disease in its own right. Obese and overweight are terms that are often used interchangeably, but let’s clarify the difference between them:

        ¨ Overweight refers to an excess of body weight and includes all tissues, such as fat, bone and muscle, but not just excess body fat.

        ¨ Obese means that someone is carrying an excessively high proportion of body fat that could compromise their health.

        If you are an athlete or body-builder, you may weigh more than the desirable weight range for your height, but this is normal because muscle weighs more than fat. Equally, you may be a relatively sedentary person who weighs in at the correct weight for your height, but who still carries too high a proportion of body fat. In this case, a good exercise programme is vital.

        For those of you who feel that you are more ‘lard’ than ‘hard’, and don’t like what you are seeing on the scales, a better way of calculating just how overweight you are is by working out your Body Mass Index (BMI).

        You can tell if you have surplus body fat simply by seeing if you can pinch more than 2.5cm (1 in) on your hips, tummy, underarms and back.

        Alternatively, get your doctor or gym instructor to check out your BMI using callipers, or buy a set yourself from your local pharmacy. If you have more than 25 per cent body fat, then the chances are that you are carrying too much weight, or at the very least need to change your diet and participate in exercise that will burn fat and build muscle.

        Successful weight loss and healthy weight management depend on sensible goals and expectations – losing just 5-10 per cent of your weight is the kind of goal that can help improve your health.

        You may be wondering how you have got this far without hearing about calories. But you don’t need to become obsessed with the calorific value of everything you put in your mouth. Instead, it is much better to check food labels to see if the food contains unnecessary additives, sugar, hydrogenated fats and salt – and, of course, how high the carbohydrate content is.

        Managing the Work/Rest Ratio in HIIT Training

        High Intensity Interval Training aka HIIT training is all the rage and there are many different HIIT training protocols available, but to produce the best results it is important to understand how to manipulate the Work/Rest Ratio.    The Work/Rest Ratio is the ratio of time spent working in the high intensity interval to the time spent in the recovery interval and there is no one ideal Work/Rest Ratio. In fact there are three distinct methods you can use to design interval training programs based on how you manipulate the Work/Rest Ratio.
        Fixed Work, Fixed Recovery
        This is the most common method and often used for group training because it keeps everyone working together.   In this method the amount of time spent in the work phase is fixed as is the amount of time in the recovery phase.   For example the ever popular “Tabata” Protocol is a fixed work, fixed recovery protocol using 20 seconds of work and 10 seconds of recovery done 8 times.    Another example is the Sprint 8 protocol which uses 30 seconds of work and 90 seconds of recovery.  In addition, all MX4 programming uses this method either for a 60/30 work/rest ratio or a 4 to 1 Minute Work to Rest Ratio during Density Workouts.
        Needless to say there are endless variations of fixed work, fixed recovery interval protocols and each one feels different and allows for a different level of relative intensity.    The advantage of these type of protocols is that they are very simple to design and very easy to track using a simple timer, and if using heart rate monitoring you can adjust the actual work intensity and recovery intensity based on individual heart rate response.   Also this is a very easy way for a trainer to manage a group as mentioned previously.
        Fixed Work, Variable Recovery
        In this method the amount of time spent working is fixed, but recovery time varies based on heart rate response.  This method is a more individualized way to do HIIT training where each work interval begins after the heart rate slows to a predetermined point correlated with a specific level of individual recovery.  The advantage of this method is it can be customized to each person based on their goal, age and current fitness level.   An example would be doing a 1 minute work interval with a fit 20 year old and setting the recovery threshold at say 120 beats per minute (a relatively low exercise heart rate for a fit 20 year old).  So he would work as hard as he can for 1 minute then go into recovery and stay in recovery until his heart rate slows to 120 beats per minute.
        Variable Work, Variable Recovery
        This method varies work time AND recovery time based on preset work heart rates and recovery heart rates.   For example using the same example of a fit 20 year old you might set a goal work heart rate threshold at 180 beats per minute – meaning that you keep him working hard until his heart rate hits this work threshold and then immediately begin recovery.    Then you would keep him at a reduced work rate until he hit a predetermined recovery heart rate threshold such as 120 beats per minute.    This is a highly sophisticated and highly individualized way of exercising with precise management of work and rest customized to the individual.
        Have some fun and experiment with each of these to prevent plateaus in your workout progress!

        My trip to Dhaka, Bangladesh, November & December 2010 & January 2011

        January 2011

        Back again at the Hotel De castle; it looks like I have spent more time here in the past 3 months than at home.

        The original brief was to develop a Sustainability Plan for the organization. However, most managers confuse it with Resource Mobilization / Fund Raising Plans. Typically a Sustainability Plan involves a risk analysis of the organization comprising of Board, Executive Leadership, Resource Audits (Man, Money, Material & Technology / knowledge), HR, ICT, Finance and other support services systems audits plus a host of other environmental issues.

        I cleared up this confusion and came to develop a Resource Mobilization Plan (Only Money); however, the team has not completed the budgets. So have to delay the process by a few days. Meanwhile I witnessed riots in Dhaka due to stock market crash yesterday. Stock price manipulation rings were very active in DSE over the past year and sent the stock prices way up beyond the wildest PE ratios possible for some companies. Just like what’s happening at the CSE in Sri Lanka. Most stocks trade much higher than PE ratio. Is this a prelude to what we can expect in the streets of Colombo I wonder?

        Finally managed to develop the RM Plan for the organization; this is the end of the assignment for me and look forward to going back to Colombo.

        December 2010

        It’s good to be back in Dhaka and at the Hotel De Castle. Guess what its Harthal season again! I was in Bangladesh in 2006 and in 2008 for the then famous Harthal “Save Democracy” which was a success in overthrowing the elected government and appointing a caretaker government. However, during Harthal the general public and the visitors to Bangladesh suffers by having severe restrictions in free movement. I will spend 2 weeks in Dhaka for this assignment with the intention of developing the Vision, Mission, Values and Strategies of the organization.

        It was hard work but managed to develop the Vision, Mission, Values and Strategies for the organization. During this process there was a one day Harthal, but it seems to have been a flop! What’s going on here, have the people finally realized not to go on Hartal for silly things? Well, we will just have to wait and see.

        As part of the assignment I had to help the management team present the Vision, Mission, Values and Strategies to the board and get their comments and final approval. However there is an issue. The issue is that; the roles and responsibilities of governance and the executive branches of the organization are not clearly delineated to ensure efficient operations. In short there is a power struggle between the two. I have to manage this delicate process; otherwise all hell may break loose during the meeting and true to form, the consultant will be the fall guy.

        You can read my article titled “Governance – Do we need to build capacity?” published in http://capacitydevelopment.ning.com/

        The meeting with the board went off without any major hiccups and got the necessary approvals and consent for the next stage of the assignment.

        November 2010

        The assignment I undertook was to develop a new Vision, Mission, Values, Strategies and a corresponding Resource Mobilization plan and support services (Finance HR & IT) plans for Acid Survivors Foundation ASF http://www.acidsurvivors.org/ of Bangladesh. I will be staying at the Hotel De castle in Banani, Dhaka.

        I must say that I was quite shocked at the number of people being attacked in Bangladesh and the physical and psychological damage it does to people. The major cause of attacks was economic (Dowry & Land). Given the poverty levels in Bangladesh I must say that I am not surprised. Having enough resources to go around for 160 + Million people is not a joke.

        The irony is that at the United Nations (Put UN Web Site) review of the Millennium Development Goals (Put MDG review results Web Site) it was concluded that mot poor countries (including Bangladesh) were failing miserably in trying to reach the MGD’s. In my Humble opinion this is because most poor countries are not dealing with the white elephant in the room i.e. population growth. This is obviously considered a sensitive subject given the reluctance of politicians to take on the religious establishments head on be it Islam or the many denominations of Christianity. On the contrary this should be the main subject of discussion by far thinking politicians the world over.

        For instance if Bangladesh were to implement strict policies to have ZERO growth in population for the next 10 years it would develop at a faster rate As even the slightest growth in the nations wealth will be held by a content population. This is common sense.

        Most people misunderstand when we talk about zero population growth. They think that you are suggesting that people stop having children. In fact it does not mean that at all. It just means that your birth rate has to be equated to your death rate.

        In the case of developing countries; the way that externally funded development sector project are implemented creates further frustrations within a given population and at times directly create political and social unrest. Most development sector professional (from the north countries as well as the south countries) don’t even understand this themselves. Consider the following. Most western donors advocate rights based projects. This means that all citizens will demand equal levels of services from the state irrespective of economic, social, political, ethnic or religious status. This in a developing country means that “now” 10,000 people line up for services as opposed to 1,000 people. The issue is that the rights based development project itself does not have any or enough funding to cater for the newly generated demand. The funds are only available to create and sustain the demand by the citizenry. So now the poor government has to serve a larger number of people with the same or slightly increased budget. This only means that in order to cater for the quantity the quality of services will be compromised. This is OK with the rich citizens as they can afford to pay for services by the private sector or bribe the state employees or use influence to get a better service from the state service provider.

        One can argue and say that this is a deliberate attempt by some of the donors to create instability within developing countries. I am not a conspiracy theorist but I wouldn’t put it past some of them. The point is that we who hail from the developing countries must act a lot smarter than we currently do if we want to develop.

        As for me the assignment will run in to the New Year and I will have to go to Bangladesh a few more times to finish the assignment.

        Trip to Hyderabad Cont

        The day of leisurely travel to Hyderabad turned in to an interesting experience for me. Here’s how it went.

        There were of course no issues in getting to the Airport or getting checked in. At the checking counter I asked the Jet Airways staff if there were any restrictions of taking a bottle of liquor to India. At which point I was told “NO SIR”. When I checked in however they were unable to check my baggage through to Hyderabad since I was changing from International to Domestic (Still Jet Airways) I was told that I need to put my bag through customs at Chennai.

        Things went smoothly from there; got through Immigration, went and bought 500ML bottle of Black Label, went through security, boarded and arrived in Chennai on time. Jet airways must be congratulated for on time flights between Colombo and Chennai. Their service too was quite good.

        Things turned in to a big process when I got to Chennai. First I had to go through Immigration, it was smooth, then through Customs, also no issue, then physically had to come out of the International Terminal and go in to the Domestic Terminal. I was told that Jet Airways staff would be there to guide the transfer passengers, however there were no staff and there were no sings to direct. I asked for instructions and got to the Jet Airways counter without any trouble. Yes I did change some money as well. At which point I was told that I need to put my luggage through the security scanner again so had to Drag my bag to the end of the terminal and re-put the bag through the security scanner (X-Ray) then had to come back and join the line to check the bag in for a second time. Luckily there weren’t many passengers in line. While I was doing this I was also carrying the Duty Free Bag with the bottle of liquor inside it and in plain sight of the Jet Airways staff.

        So I checked in the bag and went to the Taj Restaurant to quench my thirst; well things really went wrong there, apparently for some Gandhi commemoration the bar was closed. I thought I was back in Sri Lanka where for any frivolous thing they close all the bars. Never mind survived on a cool fresh lime soda.

        When it was time for me to go through the security to board the domestic flight I had to put all my hand luggage again through the security… nothing new I guess. Then came the surprise they said “Sir you cant take wine in the plane, you have to put it into the main luggage” I promptly pointed out to the security guy that I am connecting from a International flight and that I did bring the bottle on board as hand luggage and I was told that it was allowed by the airline staff the time of boarding. “No sir it is not allowed in domestic flights” came the answer right back at me. Knowing not to argue with them went back to the counter. Then the fun started….. apparently the process was that they had to get my checked in luggage out of the cargo container put the bottle back in to the check in luggage then re scan the luggage through the X-Ray machine and so on. No drink can be worth all that trouble. They also agreed with me that the bottle might break in the luggage and I will have to wear a whiskey perfume during my stay in India.

        So I was on the verge of throwing the bottle down the drain when one of the assistants who help with the luggage suggested to the girl at the counter to check the bottle in as a separate piece of luggage. That was funny; I had a grin in my face because it sounded ridiculous. But guess what, he got a small box put the bottle in, taped it up, put fragile stickers on it, and got the girl to weigh it. Guess what, the scale returned a value of zero kilograms. I thought now they are going to make a fuss again, but to my surprise no they checked in a weight of 2 KG the minimum weight of a check in luggage (Good to know I thought) and gave me a baggage tag. So I thought this is all going to be a waste as the bottle is surly going to break. So deciding to ignore a package with a streak of whiskey behind it at the Hyderabad Airport baggage belt went through the security and got in to the boarding area.

        Then came the next surprise, the flight was delayed for two and a half hours. Man now I know why they don’t allow liquor in the domestic flights as they are apparently always delayed and they don’t want disgruntled customers having a few to get over their frustrations of having to wait for an eternity. Well that is the consensus of the few guys I got chatting to.

        Finally the plan did arrive and I made it to Hyderabad. Went to collect the luggage and to my surprise the small box did make it intact. When I saw that it brought a grin to my face so get to the hotel and yes had a drink and went to sleep. So now from tomorrow morning I will be busy with the assignment. Looking forward to it.

        WORKOUT ANYTIME on CNN Money

        WORKOUT ANYTIME on CNN Money in an article titled, “What’s next for Blockbuster’s empty stores.”  The article gives information about the recent announcement that Blockbuster will be closing their remaining locations, and how this benefits franchises looking for real estate in growth markets. WORKOUT ANYTIME is featured at the beginning of the article with info about WORKOUT ANYTIMEopening 20 locations in former Blockbusters and looking to open more. Randy is quoted about why the locations are ideal and how easy it is for them to convert the real estate. Jeff is quoted about the great location and how easy it is to tell members of the community where to find the gym. The article also states that WORKOUT ANYTIME is looking for more Blockbuster stores to convert to WORKOUTANYTIME locations.  Click here for the entire article or begin below.

        What’s next for Blockbuster’s empty stores
        By: Patrick deHahn

        Blockbuster’s closing signals the end of an era, but it also means there’s a lot of retail space to fill.

        Last week, Blockbuster announced plans to shutter its remaining 300 U.S. locations. It was the final nail in the coffin of a steadily declining brand, which was bought by Dish Network (DISH, Fortune 500) in 2010 after the retailer went bankrupt.

        (Read More)

        My Trip to Manila, Philippines

        The assignment in the Philippines is to review a Strategic Plan which has been developed with the assistance of another consultant. On first glance of the plan it was not constructed in a logical way. The SWOT analysis was not used to look at strategic options. The whole plan is just a list of SWOT elements and clubbing of current activities in to 12 areas of work and finally selecting 6 areas which they call strategies and allocating opportunities and threats that are relevant to these selected 6 areas. They have not used the strengths and weaknesses.

        The previous consultant does not seem to have a grasp of the logic in strategic planning; the need to start with the external factors that influence the organization and then move inside the organization.

        The staff of the organization also seems to be very new to planning let alone strategic planning and have an aversion towards prioritizing and selection. As usual they seem to want to do everything. So all in all the previous plan does not have a logical flow as well as the choices the organization has made in order to mobilize resources and achieve the mission.

        My task of reviewing the strategic plan was made a lot more difficult as there were representatives from a funding organization who along with the staff thought they knew everything and in reality they “did not know what they did not know”. I some times wonder why they hired an expert if they think they know everything.

        They are more interested in retrofitting “logic” in to the current plan! Go figure! In effect they want to create a strategic plan breaking all the rules. I had a tough time to pull them into the right path. It seems that the organization/staff are not willing to change their current operating mode of adhocracy to a more strategic, structured logical way. So I explained that until the willingness to change is there the strategic plan will continue to be just a piece of paper.

        Now I have to do the documentation. Hope to finish it as soon as possible. Looking forward to returning to Colombo; Manila is too noisy for me and for some strange reason I do not seem to like Manila. Well I have finally found a city that I do not like.

        Original Mexican Mazel Mex

        • 2.5 cups cold water
        • 1.25 cups cornmeal
        • Generous dash cayenne pepper and/or cinnamon
        • 2-3 Tbs. corn oil
        • 3 onions, peeled and coarsely chopped
        • 8 large tomatoes, coarsely chopped
        • 1-2 fresh green or jalepeno chilis, peeled and coarsely chopped
        • 1-2 cloves garlic, peeled and minced
        • Diet Start
        • 1 Tbs. fresh cilantro, chopped and torn into leaves
        • 1 Tbs. fresh parsley, chopped

        Combine water, cornmeal, and cayenne. Cook, stirring frequently, over medium heat for 5-8 minutes. Pat evenly onto bottom of 8″ x 12″ casserole.

        Sauté onions in corn oil until translucent and fairly soft (10‑15 minutes). Add tomatoes, chilis, and garlic, and cook 2-3 minutes. Pour mixture over cornmeal base and bake in 350° oven for 20-25 minutes. To serve, sprinkle with cilantro and parsley.

        YIELD: 2 servings.

        Although taste is bitter if tomatoes are unpeeled, the peels are an important aid to digestion.

        Hazel Enchiladas

        • 6-8 corn tortillas
        • 0.25 cup corn oil
        • 2 recipes Mazel Cheese Mexican
        • 1 recipe cooked Salsa Mazel
        • 1 recipe fresh Salsa Mazel

        Dip corn tortillas in hot corn oil, then into cooked salsa. Fill with Mazel Cheese Mexican, and roll into enchiladas. Cover with cooked salsa. Bake at 350° for 15-20 minutes. Serve with fresh salsa.

        VARIATION 1 Add I bunch fresh spinach, cooked and chopped, to Mazel Cheese Mexican.

        VARIATION 2 Add 1 tablespoon fresh mixed chives and parsley to Mazel Cheese Mexican.

        VARIATION 3 Use 1 recipe Mazel Cheese and 11/2-2 cups sour cream rather than 2 recipes Mazel Cheese.

        YIELD: 2 servings.

        Depending on size of tortillas and how you fill them, you may wind up with a bit of extra filling. If so, add it to the casserole or reserve it for another use. But better too much than too little.

        TestRun, Video Edition: Recording Gameplay – Rollercoaster Tycoon 2 (Video Samples with Brief Tutorial Video)

        This is a more informal TestRun, where I was merely testing out the perceived quality of some recording codecs while attempting to get gameplay recording of Rollercoaster Tycoon 2 going. As most of you know, recording this game is not just a point-and-shoot affair. Heck, most game recording applications won’t even detect the way it is buffering and utilizing video memory, resulting in a black screen, flashing or very laggy output. After trying years ago and abandoning it temporarily, I was recently searching websites with information on trying it again. With no luck finding a starting point of information, I decided to figure it out on my own – and of course share my findings should anything turn out fruitful…

        First, simply trying to record RCT2 with FRAPS and then Bandicam, turned up nothing as a result. Either it would not detect the screen (it is not using 2D/3D rendering/buffering on the videocard in a standard manner) or it would capture blackness (when trying Bandicam’s ‘Record The Screen’, for instance). Since these are two well-made recording products, I assumed other products would result in the same …result. I also seem to remember trying applications like Camtasia, back in the day..

        So next, I tried good’ol ‘Virtualbox’. A staple Virtual Machine emulator (think of a little computer-running-inside-a-computer), I installed an old version of WindowsXP that I had into the GuestVM. Installing my DRM-free purchase of RCT2 from Good Old Games, I tried recording the screen. No luck, since it wasn’t using Direct3D in a way that I could record (after I finally got Direct3D working in it). I tried playing it in a Windowed VM and recording that. It wouldn’t even run for some reason. It kept trying to ‘take over’ the VM and resizing it. I tried setting my Host Computer desktop resolution to 1280×720 and getting the game to detect that and run it at that resolution, ‘Full Screen’ and ‘Seamless’. Nope. For one thing, the game kept detecting and making available only the most basic of 4:3 aspect resolutions (CRT monitor type sizes), no matter what driver/settings I used for the virtual machine (I of course wanted the more modern widescreen 16:9 ratio, as YouTube uses).

        Third, I tried VMware’s ‘VMware Player’. A free virtual machine app, where the business version (VMware Workstation) is the go-to prog for business virtualization. Installing my XP and then RCT2 into the VM, I got it going in 720p rez and prepared Bandicam to record a “Rectangle On A Screen”. It worked wonderfully. So, with the odd stutter (very few and far between), I can now record RCT2 gameplay and wanted to share my findings of the ability with everyone.

        I was also messing around with different recording codecs, to see what they looked like at different settings with this game at 720p. I quickly threw together this little video showing some settings and results (Sample Video). A summary of what I have set up to record Rollercoaster Tycoon 2 gameplay is just below a short analysis of the video/recordings. Again. this isn’t a ‘full/technical’ TestRun, it is just me sharing some tests I did and showing that one can indeed record RCT2. Further down, there is a video that goes over the steps in summary, then in slightly more detail, showing the steps taken on the screen, a short ‘tutorial’ I suppose. For those who haven’t figured it out or got it working yet, perhaps this information will help you out, too. Enjoy!

        RCT2 testing (codecs/settings) with Bandicam (Samples)

        Recorded with: Bandicam, various quality settings, various codecs @ 1280×720 (720p HD)

        Recorded game: Rollercoaster Tycoon 2 (RCT2)

        Some recording data (per codec) for this test:

        MJPEG @ q80 = 45,000kbps data rate (~330MB per minute of gameplay recording)

        MPEG-1 @ q80 = 11,000kbps data rate (~80MB per minute of gameplay recording)

        MJPEG @ q60 = 34,000kbps data rate (~250MB per minute of gameplay recording)

        MPEG-1 @ q60 = 3,000kbps data rate (~22MB per minute of gameplay recording)

        *XviD and x264 are omitted as results for this test as editing/recompression resulted in corrupted video output (they will be included in a future TestRun with many codecs)

        Brief analysis of sample video:

        • All of the MPEG-1 settings are quite watchable, unless of course the temporal gibbs effects bothers you (the little ‘ghosty/glimmer’ effects that follow around the peeps). Perhaps if I didn’t mention it, you might not have noticed? As with all recording/editing, if it ‘looks fine to you’, then you can run with it if you want. Some people “need” the best quality possible, some can watch any quality and enjoy it. If the MPEG-1 setting at 80% Quality seemed fine to you, go ahead and use that (it is about 1/4 the size of the MJPEG recordings and I have found that editing MPEG-1 is bit slower but quite possible to do in editing applications such as Sony’s Vegas line of products).
        • The MJPEG at a Quality of 50 percent is watchable but messy looking, as expected since a JPG (MJPEG is a series of JPG frames) at only 50% quality would have tons of compression artifacts. 60% is just as bad, with ‘rough blocks’ everywhere (macroblock artifacting). MJPEG at Quality80 isn’t bad and very watchable, but it is much larger in bitrate usage/file size than say, MPEG-1 at the same quality setting (it is about four times larger in file size). It is the easiest codec to edit, however.
        • XviD, an MPEG-4 codec, can potientially looks a lot ‘cleaner’ as it can handle smaller macroblocks/divisions of the screen (inherent in the improvements in MPEG-4 over MPEG-1) – but the output seems to have strong corruption (it leaves ‘trails’ on the screen) when attempting to edit/recompress it into a final product (as seen in the video).
        • x264, a more recent ‘Advanced Video Codec’ version of MPEG-4, it records in wonderful quality and low file sizes – but all of that is hidden behind, again, corruption (‘trails’ left behind on the screen*) and slow editing.
          (The editing can be helped somewhat by specifying a smaller GroupOfPictures (frames inbetween keyframes/information frames, to help seeking through the video.)
          Keep in mind that for the MPEG-4 codecs, the corruption surfaces only when editing/recompressing the source video. The ‘original’ gameplay recording in MPEG-4 is quite clean and watchable, completely fine if you are just going to ‘record-and-upload’ to a video sharing site or personal website.
          *More on this issue and x264 recording in a future article
        • A full Codec Comparison TestRun is coming, where I test out a bunch of different codecs and see how they fare for general game recording, MPEG-1, MPEG-4, AVC/h264 (MPEG-4 Part-10), MJPEG, XviD, RGB24 and more…

          Some related articles:
          Game recording comparison with various codecs and settings (Minecraft)
          http://gametipsandmore.blogspot.ca/2012/10/testrun-video-edition-fraps-vs-dxtory.html
          The ghosting/blurring effect when rendering in Sony Vegas products
          http://gametipsandmore.blogspot.ca/2012/10/and-more-how-to-stop-ghosting-or.html

        There are a couple other ways to do it I think, but here is how I recorded Rollercoaster Tycoon 2 gameplay with Bandicam:

        • Install Windows into a VM Guest (for example, a VMware virtual machine within the VMware Player application)
        • Install RCT2 into that Virtual Machine, running the VM in a window (for example, 1280×720)
        • Set up Bandicam to record a ‘Rectangle On A Screen’ and set the Rectangle to be the same size as the Virtual Machine running in a window (in this case, 1280×720) and line them up. 

        That’s it!

        Tutorial Video on how to record Rollercoaster Tycoon 2 with Bandicam

        I had seen many people on many forums asking for years how to record RCT2 gamplay. I have seen a few videos online now and so some have it working, but if you haven’t been able to get it going or would like to try to make your own Rollercoaster Tycoon 2 videos, here’s how. Good luck with it and have fun!
        See you in the games!

        Rörstrandsgatan Popular Extraordinary Penthouse

        Extraordinary penthouse in the popular Rörstrandsgatan.

        Extraordinary penthouse
        Extraordinary Penthouse
        This confidential loft with windows on all sides there is an optimal location in the circumcircle Birkastan. A rarity in the design and location where the architect has planned floor in every detail to create an open atmosphere where the different rooms in a natural way integrated with each other. This floor will host a social get-together in a bright environment with plenty of space by nearly 5-foot ceilings in the ridge and a large sunny terrace right next to the kitchen. Beams are tastefully built and floor is one of few lofts that are not constrained by snetak. 
        Well-chosen and thoughtful details include floor heating under beautiful oiled oak parquet flooring and dimmable spotlights throughout the whole apartment. In the living room we find a plastered fireplace with adjustable chimney sat on the black painted fire brick. Modern sound systems are drawn into the walls. Windows are fitted with double glazing which means, in principle, completely eliminated the sound inlet and heat protection glass to keep the floor cool in the summer time. The kitchen is very lavish and signed exclusive German manufacturer Bulthaup. The kitchen is consistently white countertops in the unique composite material is white Corian. The machinery in Alufinish come from reputable Gaggenau. The two bedrooms are furnished with site-built wardrobes and the slightly larger bedroom has both big walk-in closet and bathroom adjacent. Both bathrooms enjoy exclusive furnishings and are equipped with underfloor heating. One of the bathrooms have both shower and bath and the other only shower. Modern washing machines and tumble dryers from Miele. 
        Rörstrandsgatan is one of Stockholm’s main restaurant streets with wide range of pubs, cafes and bars. Nearby is also an opportunity to cozy walking and jogging along the Karlberg Canal. Or how about a picnic or playing tennis in Karlberg Palace Park, only a few hundred meters away. Good communications in the form of Karlberg station with both commuter rail and bus service as well as St. Eriksplan underground station.
        LivingsRoom
        LivingsRoom

        BeDroom Design
        BeDroom Design

        Bathroom Desing
        Bathroom Desing

        Design Schema
        Design Schema

        Nutritional Strategies for Allergy and Asthma

        SeasSeason allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
        Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
        What are Allergies Anyway?
        Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
        Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
        Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
        Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
        Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
        Strategies for Allergies
        Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
        Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
        Boos
        Increase your intake of Omega 3 Fatty Acidsfrom cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
        Nutritional Supplements for Allergies
        There are several highly effective nutrition supplements for allergies including some key herbs.
        Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
        Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
        Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
        Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and the best form of quercetin is contained in a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.
        Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
        Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
        NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
        You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

        My Trip to Baticaloa

        On my way to Baticaloa, This was taken on the Polonnaruwa Habarana Road today (12/06/2011) @ 2.00 PM. Wow what a Jumbo!

        Essential fats

        If you have been doggedly avoiding fat in an attempt to lose weight — this approach is WRONG. You need fats in your diet. Your brain consists mostly of fat, and your intelligence, heartbeat and muscular movements all depend on it. The only way in which your body can send electrical messages through living tissue is via your nerve cells and their connectors, which again are made of fat.

        The fact is that some fats (known as lipids) are essential. They act as the second energy reserve behind glycogen, providing most of their energy at around 70 per cent of maximum heart rate. Endurance athletes utilize fat as an energy source more than other sports people and this is why they tend to be lean.

        Fats are not just for energy, though. Their many other functions include insulating important organs, carrying fat-soluble vitamins and regulating hormone levels. If you’re a female athlete and you experience a loss of your periods, this may be due to extremely low body fat, for this plays a vital role in the activation of the female hormone oestrogen.

        Fats also contribute to health in many other ways — provided they are of the right kind. In an attempt to warn people about the risk of consuming toomuch fat, certain groups have created the impression that all fats are bad, but this simply is not true.

        Diet Start

        Are you eating the wrong fats?

        Many people in the Western world are getting 45 per cent of their calorific intake from fats, but these are junk fats that the body cannot use, so these people are just as fat-deficient as those on extremely low-fat regimes.

        THERE ARE TWO MAIN TYPES OF NATURAL FATS:

        1. Saturated fats come primarily from animal sources such as meat and dairy products, and from coconut and palm-kernel oil; they are solid at room temperature. They provide the body with a stored form of energy in fat cells.

        2. Unsaturated fats are found in vegetables, nuts, grains and seeds, and in fish and game; they are liquid at room temperature. They contain two fatty acids that are essential to life and, more importantly, that the body cannot produce itself. These are linoleic acid (omega-6) and linolenic acid (omega-3) From these two ‘essential fatty acids‘ your body can make all the other fatty acids it needs.

        Is it just a case of cutting out saturated fat?

        Saturated fat gets a bad press, and a diet too heavy in it has been closely linked to cardiovascular disease. However, there is another fat with an equal capacity to harm: hydrogenated fat.

        Hydrogenated fat is solid or semi-solid at room temperature (the best example being margarine). It is created when a liquid oil (such as corn oil) has hydrogen added to it, changing its chemical structure. This in turn can interfere with the metabolism of some essential fatty acids. Research has shown that the trans fats in hydrogenated fats can increase LDL (poor) cholesterol,decrease HDL (good) cholesterol and thus raise the risk of coronary heart disease. Hydrogenated fat is found in almost all processed foods, plus frozen convenience foods and deep-fried fast food. This is another good reason to say goodbye to junk food and hello to fresh produce.

        If you usually ingest high amounts of processed fats and use commercially altered oils for cooking, then you are certainly not getting the balance of fats that your body needs.

        Why don’t food manufacturers use healthier oils?

        Even though the food industry uses vegetable oils that contain a reasonable amount of omega-6 fatty acids, they avoid omega-3s because these are more susceptible to oxidization — in other words, they go rancid quickly and don’t have a long shelf life.

        Ironic, isn’t it? Food manufacturers quite happily promote food under the guise of lowering cholesterol and reducing heart disease, but they are ignoring one of the fats essential to health. So unless you are eating high amounts of fish, fish oils, leafy vegetables, nuts, unrefined olive oil, tofu or flaxseed oil, your ratio of omega-6 to omega-3 fats is probably screwed up, and this in turn will be screwing up your health.

        The current Western diet is much higher in omega-6 fatty acids than omega-3’s. Remember those healthy Palaeolithic people we were discussing earlier? They were eating equal amounts of both.

        How is this relevant to body weight?

        If you are eating a diet with a good balance of omega-6 and omega-3 fatty acids, this will affect your body in beneficial fat-burning ways:

        • Your metabolic rate will be increased, as will the metabolism of fats, so more stored fat will be burned for energy
        • Your cells’ sensitivity to insulin will be increased, so that it regulates blood- sugar levels more effectively
        • The ratio of insulin to glucagons will improve, which will unlock the fat- storage banks and again allow fat to be burned as energy
        • Natural appetite suppressants will kick in.

        So if you want to improve your chances of losing weight, you need to up your intake of omega-3 and other healthy fats.

        Essential fats Q&A

        Q. How often should I eat oily fish per week if I want to consume enough omega-3 fatty acids?

        A. You should aim to eat oily fish a minimum of 2-3 times per week, or ensure you use flaxseed oil regularly on salads to raise your levels. Try to eat fish from as safe a source as possible as many coldwater fish are contaminated with heavy metals and pesticides.

        Q. How can I avoid hydrogenated fat?

        A. Cut out processed food and only use cold-pressed un-refined oils such as olive oil, or coconut oil for cooking. Don’t eat fast food that has been deep-fried and avoid butter type spreads. If you did this, then you should be able to avoid consuming dangerous trans fatty acids.

        Chronic Illnesses and Diet part 3

        Visualization and Chronic Disease

        To the ten steps of the Body Clock Prescription, I’d suggest adding visualization, another powerful tool for controlling chronic disease. Life consists of moving forward into images. You get to the dry cleaners to pick up your laundry by making a mental picture of the journey and moving forward into that picture. No picture, no laundry. With visualization, you are going to create an inner picture in order to realize your intention, not just in the outside world of the dry cleaner but in the inside world of your immune system.

        The first step is to get the knack of meditation so that your mind and body are in a receptive posture for visualization. Let’s assume that you’ve learned to enter a meditative state; riding on the letter M, your mind can enter a new space within your consciousness. From here, you can take one step forward into your imagination and make a picture of what you want to accomplish in your body.

        The effectiveness of this approach was initially proven in an experiment conducted with doctors suffering from terminal or advanced cancer. They were shown accurate images of their own cancer cells and of their immune system cells and were asked to create a realistic visualization of the immune system cells attacking the cancer cells. Most of the doctors successfully curbed their cancer — not to the extent of actually curing it, but in most cases there was measurable improvement. Since then, numerous experiments have shown that a less accurate image of the enemy is just as effective.2

        Diet Start

        About twenty years ago I used to meet one evening every month with a group of other doctors, including Dr. Bernie Siegel, one of the pioneers of visualization. Bernie shared fascinating examples of the kinds of imagery cancer patients chose to promote healing of their illnesses. It seemed important that the image be accurate in its intent; it was disconcerting when patients chose wimpy defensive images that were the imaginary equivalent of trying to beat their cancer with a wet noodle. People who chose aggressive images did better; lions, tigers, sharks, polar bears and knights in shining armor do better work than a little girl gathering up cancer cells into snowballs and throwing them over the fence.

        But what’s a good image if you have chronic inflammatory disease? In this case, redness, heat, swelling and pain afflict some part of your body as it reacts to an enemy that the doctor hasn’t been able to discover or that has disappeared from the scene of the crime, leaving your immune system in a perpetual dither. You need a picture that is soothing but not self-defeating by way of quieting your immune reactions to the point of defenselessness. This is where a chemical or an abstract image may be more appropriate. By chemical image, I mean something along the lines of `Let’s put out the fire’. Remember that inflammation is an expression of your body’s fire burning out of control. Whether it is in the skin, the digestive tract, the lungs, the heart, the nose or the eyes or, for that matter, whether or not it is producing palpable heat, some kind of uncontrolled fire is at the bottom of a lot of chronic illness. Parkinson’s disease, for example, has been characterized as a fire in the brain. And the oxidative damage in the chemistry of autistic children constitutes a kind of fiery injury to their RNA and DNA.

        If you are going to employ visual imagery to quench the fire, then why not use pictures that are more effective than merely aiming a fire hose or throwing ice water at it? Instead, try mobilizing your body’s powerful natural resources for quenching the inflammation, calling on your body’s clouds to release rainwater on the brush fires of the prairie where the inflammation resides. This could be your intestine if you have colitis, your joints if you have arthritis, your skin if you have dermatitis, your lungs if you have bronchitis and so on. You can even get technical and make your raindrops into vitamin C, vitamin E, beta-carotene and other potent antioxidants. Communication between your meditating-visualizing brain and the resources of your body is more dynamic and more specific then you know.

        When Bernie Siegel began talking about people’s responsibility for their own health and healing in the face of serious illnesses such as cancer, people accused him of ‘blaming the victim’ by placing an unreasonable burden of guilt on the sick person. But you can’t really take control of your health without believing that your health is to some extent under your control. Even a person who has been a victim of some catastrophic accident must believe that he or she can exercise control over healing, to at least a small but critical degree, through the expression of intention in prayer or visualization or by the exercise of sheer willpower.

        For people with chronic illness, the lines of causation are more ambiguous than they are in an accident. However irrational it may be, all of us feel guilt for things that happen, like the ill-timed flareup of cold sores just before an important public appearance. Feeling guilty won’t get you anywhere, but feeling responsible is the key to taking charge. If you feel like you’re the passive victim of the event, you may miss a chance to engage your body’s resources for healing. Only by feeling that you can take responsibility for your own health will you be able to make the changes that are necessary for regaining that health in the face of chronic illness.

        Personal Log: Might not be able to post for a bit longer still… [Editorial/Personal]


        Personal Log, Stardate 20160901 [I have no idea how that works heh]

        Just a quick Personal Note to say that I apologize to my dear readers for not posting anything for a while, and that I may not be able to post for a while longer yet… I have been experiencing a worsening of my ongoing symptoms… I may be okay in about week or so and finish up some Project irons I have in the fire; but I don’t know, it may take longer than that to get back up to the point where I can play and finish testing some recording programs I was working on, and post about it all…

        < Potentially Sad Talking About Sicknesses Follows, In Case Of Feels, Stop Reading, Play Game >
        I’ve never really mentioned what I have or what I go through before, since starting this Blog five years ago.. I didn’t really want to trouble people or put those thoughts/feelings on them, but I have had a few people ask me personally what it was – and I was looking something up recently about my condition (it’s a condition I (and Doctors as well) are constantly having to learn about) and I read quite a bit about other similar stories, where other suffers were in much worse condition than me… They were literally bed-ridden… And while I was also like that for the first couple of years, I have improved slowly over time to the point where I can sit up, and sometimes even play games, and on good days work on an article and do things around the house… 
        My condition is Myalgic Encephalomyelitis, which is an infection of the brain and spinal column, which gives components of Chronic Fatigue (getting tired easily with a slow recovery rate (as in days) if I go to the store, etc) and Fibromyalgia (inflammation and pain in all areas of the body, like when you get a ‘flu’ and are sore all over? it’s that, all the time…heck, many of your Aunts or Mothers may have Fibromyalgia, so you may have heard about it..). It is not a well-known disorder, despite millions of Americans having it.

        Every year I learn something new about it or studies that found out something new about it; but nothing is ever concrete on ‘how to get rid of it’, unfortunately. The only good part about that is, is that all Doctors have concluded that it is “something that goes away on it’s own, but noone knows when”… Some people have it for a year or so and some have it the remainder of their lives. I am in my 10th year now, but as I have said in the past, I try to always see the positive in things and I have been slowly improving overall, slowly over the years…

        I don’t want to make anyone feel sad, I am sorry if this information does… I merely wanted to inform my readers that I may not be able to post things I have been working on for a while longer… Some of the things I was working on are: GPU-Accelerated Game Recorder Comparisons (Playclaw, Bandicam, Mirillis Action, D3Dgear, and more), First Impressions of some games that I started work on already (The Elder Scrolls Legends Closed Beta, Dropzone Closed Beta, A Return To The Elder Scrolls Online (I was in the Beta for it) and others), bringing back the “Can You Guess Where The Screenshot Below Is From” (there have been no winners so far and I have some Giftable Games a-waiting on Steam and GamersGate) and even more projects that I don’t want to mention yet – to keep them a ‘surprise’, heh).

        I enjoy writing my articles and posts here, helping others with the information I have figured out, found or collected, doing testing, giving tips of games and even Video Editing and showing effects of settings in both, including also creating the Headers and graphics utilized here (they are all done by me)…
        I plan to continue doing this for a long time to come… I just realized there has not been much the past little while and wanted to let you all know there may not be some yet for just a little bit longer (‘recovering’ from a Cold or “doing too much” takes about a week or more each time I do something or get a cold, to get back to where I was, with this illness, everything takes far longer..).
        Thank you for your patience, my wonderful readers, and I hope that I can contribute helpful information again for you, in the near future.

        Sincerely,

        ~Troy from The Game Tips And More Blog

        Sample Dining Room Minimalist Design Idea

        Sample Dining Room Minimalist DesignSample Dining Room Minimalist Design

        Sample Dining Room Elegant DesignSample Dining Room Elegant Design

        Sample Dining Room Classic DesignSample Dining Room Classic Design

        Sample Dining Room DesignSample Dining Room Design
        Sample Dining Room Elegant DesignSample Dining Room Elegant Design

        Modern Side Table Lamps Design

        If you are an artistic creation lover then you must observation for modern side table lamps. It has a funky look which might make you feel as if you are in around future time or in space. Its abstract and artistic design complements the other paintings and art fashionable your home along with elegance and beauty.

        If you’ve a woody environment at your home base decorated in Indian style, then western table lamp design is the best choice for you. The western table lamp comes in a cowboy sort of look. Either there is a cowboy along with a horse of just a horse attached on it. This gives a very classy look to the woodsy type of a house.
        Country style reminds you of Country music only but you can also find a country style table lamp also. It’s farm animals alike cows, cocks and others designed on it. It is considered to be the most colorful sort of lamp with natural color and scene.

        Oriental lamp shows much about Asian culture in its design. The unique Asian roots can be seen in this type of lamp and would best fit if you have a room filled with Asian souvenirs.
        Choosing the perfect table lamp for every room should be your concern as their being complementing the living furniture makes out the atmosphere. There are various styled table lamps for your side tables like western table lamp, modern, urban, Asian and nation but to pick the better for every room needs examination and time. Here is a little guideline for you:
        Now you have a selection of lamps from which you can choose the best for your place. Take care of the existing decoration of your home when you choose the side table lamps.

        DECORATING IDEAS FOR GIRLS BEDROOM GOOD

        True, the fairy tale castles and princesses to provide a wide range of ideas for rooms, but today, we would like to show you something new: the heart. You have seen the newspaper attracted to each student a sheet of paper or sticker. It is a known fact: girls love hearts. Therefore, these six theme rooms under furniture in cardiac function. The colors are also typical of girls (pink, light green, yellow, red, light blue). Chairs, pillows, blankets, nothing has escaped the powerful heart-shaped plan.Some these interiors are a little crowded for our taste, but again, this is not our goal manufacturers.

        DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

        DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

        DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

        DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

        DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

        DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

        DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

        DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

        DECORATING IDEAS FOR GIRLS BEDROOM

        DECORATING IDEAS FOR GIRLS BEDROOM

        INTERIOR DESIGN IN BANKE HOTEL

        BANKE HOTEL

        BANKE HOTEL ROOM DESIGNBANKE HOTEL ROOM DESIGN

        BANKE HOTEL DESIGNBANKE HOTEL DESIGN

        The Banke Hotel is recently installed in the Opera district in Paris-a first for the prestigious hotel chain Derby Hotels Collection. As its name hints at the Banke Hotel is the story of a metamorphosis. That of the body of a conventional bank Haussmann in a luxurious hotel of 94 rooms – which harmoniously blend the baroque style and design

        BLACK WALL INTERIORS DESIGN IDEAS FOR A MODERN HOME

        Are you brave enough to try a deep impression on the black walls at home? A dramatic effect can be created on the walls of blacks is unique, and it takes courage and commitment to create an interior decorated with beautiful black walls. A black-painted walls, chalkboard walls, elegant black background, or even some black accents can change the look of the interior.

        High ceilings and lots of natural light conditions seem to enjoy blacks the walls in my room, but even the smallest spaces can look modern and stylish, if all other elements are chosen to enhance the contrast and the dark walls. Some of you are going to see the inside is a piece of furniture in bright colors and decorations that mitigate the effects of black walls, others will benefit from natural light, some are painted on wood or walls, wallpaper, and applications – but all ideas have two things in common: the courage and well-designed structures.

        BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

        BLACK WALL INTERIORS DESIGN OFFFICE FOR A MODERN HOME

        BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

        BLACK WALL INTERIORS DESIGN FOR A MODERN HOME

        BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

        BLACK WALL INTERIORS DESIGN DINNING ROOM FOR A MODERN HOME

        BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

        BLACK WALL INTERIORS DESIGN BEDROOM FOR A MODERN HOME

        BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

        BLACK WALL INTERIORS DESIGN KITCHEN FOR A MODERN HOME

        My trip to Yapahuwa

        I just completed an assignment for an international networked organization. They are in the process of establishing and sustaining a national level sister organization with district level branches which will belong to the same network.

        The assignment was to critically look at the activities undertaken to sustain the district level branches. Well basically looking at the resource mobilization of each branch.

        When considering resource mobilization for the development sector one automatically recalls the telethons and other fundraising activities done by charities to raise millions of dollars; quite similar to the ones that are going on for the Haiti earthquake relief operations.

        However resource mobilization in the 3rd world is quite a different matter. It is fundamentally handicapped due to the following reasons.

        1. Most INGOs and Local NGOs operate in the 3rd world as project implementers. Therefore their articles of association / constitutions do not provide for resource mobilization (self generated / self raised funds).
        2. Due to above most states (in Asia) do not recognize them as registered charities that qualify for fund raising which is tax exempt.
        3. They are only allowed to receive funds from donors who already have funds or who have access to funds. Generally these funds when received in the implementing country are exempted from income tax.
        4. In fact, the local legislations which facilitate the registration of these entities for legal purposes themselves disallow any kind of activity which earns an income for the organization.

        So, in order for an organization (NGO) to be legally able to engage in resource mobilization they have to:

        1. Ensure that the articles of association / constitutions that they operate under provides for such activities.

        2. Get the governments to recognize them as charities (this is generally done by conforming to already existing legislation or you would need an act of parliament or for parliament to pass new legislation to facilitate this).

        3. Once you are registered as a charity that qualify for fund raising which is tax free you can look at the spectrum of resource mobilization activities which are at your disposal.

        Fund raising activities in general falls in to the following broad categories.

        1. Cause / Issue based (HIV/AIDS, TB, Child Labour, etc.).
        2. Event based (Tsunami, War, Earthquake, etc.).
        3. Faith based donations to religiously affiliated organizations
        4. Bi-lateral funds.
        5. Multi-lateral funds

        There is however another resource mobilization strategy which is “Income Generation Projects” which is: an organization (NGO) can engage in commercial activities such as training, providing a chargeable service, renting of assets, producing some products etc. to generate a profit. This profit is then used for development activities.

        If an organization (NGO) wants to use this strategy they need to ensure that the articles of association / constitutions as well as the legislation / act of parliament clearly addresses’ this activity. Otherwise an organization may become liable for income tax. This risk may jeopardize the sustainability of the organization; therefore careful consideration must be given to the legal landscape before engaging in such activities.

        However my client has started several “Income Generation Projects” without considering the above. There is a huge risk associated with this and no remedial action is being taken.

        As for the income generation projects, they seem to have been started based on good ideas and not based on the profit they can earn to sustain a development project or a part of a project. Further they are being executed by the same staff taken to deliver development services (who by the way have no business skills) to the target groups; needless to say that the “Income Generation Projects” are doing poorly. They are hardly making profits some are making huge losses. In some cases, not only are they making losses, but they have very high turnovers which go beyond the value added tax threshold (VAT). This is a huge risk for the organization.

        The assignment was well received by the client and they have already engaged me for a follow up assignment to develop realistic business plans for the “Income Generation Projects”.

        Yapahuwa is a historic / archaeological town which boasts the second rock fortress of Sri Lankan kings. It is close to many not so famous archaeological sites and now boasts a new hotel – Yapahuwa Paradise. I recommend a visit to Yapahuwa if ever you are in the north west of Sri Lanka.

        And More: Deals and Sales – Free from EA, Battlefield Hardline’s Betrayal Expansion/DLC, Until July 12th [Notification]

        Just a quick Notification, for those interested in Battlefield Hardline, that an Expansion for it is currently being offered Totally Free from EA via their “On The House” promotion:

        Screenshot of the Information Panel in the Origin Client for the Battlefield DLC/Expansion, Betrayal
        (Click to see Full Size)

        Free right now, EA is offering the Expansion for Battlefield: Hardline called Betrayal, which features 4 new maps (Thin Ice, Chinatown, Cemetery and Alcatraz), 2 New Vehicles, New Weapons (Personalize up to 5 Weapons with the Gun Bench and Test Weapons in the Gun Range!), New Assignments, New Camos, New Paints, and more [Inquisition Swooooord!lol]. While it does require the Base Game Battlefield: Hardline, even if you don’t own Hardline itself, you can Add it to your Origin Games Library and then Download it when you get Hardline in the future. If you are a Subscriber to Origin Access, you already have this available, for ‘free’ (it is part of the Vault Games available to you).

        The Expansion/DLC itself was originally released in March of 2016 and although it may not help with there only being a handful of servers in North America on PC with a high number of players on them (there are a lot more if you are part of the EU), it is still worth going and grabbing [in my opinion, especially if people end up coming back or playing more in the future. I have already seen an influx of new players, thanks in part to EA’s recent Up-to-75% Off Sale and DLC Giveaways].

        I have also been working on a “One Sentence Review” of all the Weapons in Battlefield: Hardline that I want to post here at The Blog in the future; but for now, if you are interested at all in Hardline, grab this while you can – and See You In the Game!

        [Personal Note: I am not affiliated with, nor receive any benefits of any kind from EA/Origin (check the Links, there are no ‘Affiliate Tags’ or anything on them); I am merely an enthusiastic gamer who tries to pass on information to other gamers, when I can. Enjoy, dear reader.]

        Easy or Hard to Digest

        The faster your body can digest a carbohydrate, the higher its dieting index value. There are two major types of digestible polysaccharides or complex carbohydrates: amylose and amylopectin. Both contain many glucose units, but the foods with more amylopectin raise the blood glucose levels much more readily than foods containing more amylose. The branches in amylopectin starch have many surface areas, which make it easier for digestive enzymes to break it down faster.

        Diet Start

        These easy-to-break-down starches include foods such as most breads, white potatoes, white flour, and snack foods such as pretzels, donuts, and cookies. Most of these foods are also processed or refined carbohydrates, but some natural unprocessed carbohydrates have higher amylopectin levels, including parsnips, russet potatoes, and rutabagas.

        Starches that contain more amylose include some whole grains and legumes (lentils, dried peas, and beans) and some of the starchy vegetables such as yams and sweet potatoes. These foods are best for your dieting index weight-loss program.

        Dietary Fiber

        Most dietary fiber is not digestible. In other words, you might consume the fiber, but there’s a good chance most of it will not be digested such that the nutrients enter your bloodstream. Instead, the fiber is excreted in your stool. There are two major types of fiber: soluble and insoluble. Mostly it is the insoluble fiber that does not get digested, but both types of fiber slow the rate of carbohydrate breakdown into blood glucose. Because of this, it’s great for you to eat lots of dietary fiber. Ideally, you should consume 25 grams or more every day.

        Don’t overdo the fiber. But you’d need to consume a virtually unpalatable amount of fiber supplements, such as psyllium husks, to eat too much fiber—such as 4 or 5 tablespoons a day. With too much fiber, you could actually block the absorption of important vitamins, minerals, amino acids, and more. Overeating fiber can, in essence, make you undernourished. (And undernourished doesn’t equate to being thinner.) More than 45 grams of fiber a day is generally too much for most of us.

        10 Reasons to Write with Technology

        I’m super excited about the two books that I’m studying this summer as part of my summer series.

        Today, I’m diving into the first one entitled When Writing with Technology Matters by Carol Bedard and Charles Fuhrken. 
        Rather than giving you a laundry list of all of the ways that you could integrate technology into writing, this book goes in-depth into two specific projects. The first project uses reading and writing to launch moviemaking, and the second project is authoring a visual nonfiction essay. As someone who routinely integrates technology in the classroom, I like this book because it examines lots of angles of these types of projects in great detail. But this book is also good for beginners for that same reason. Rather than offering an overwhelming number of ideas, it breaks down projects into manageable and authentic steps. 
        I’ll be examining each of those projects in future posts, but today I want to talk about the first chapter – 10 Reasons Why Writing with Technology Matters.

        The opening chapter is filled with research about how technology integration contributes to student learning. They break it down into a list of the following 10 items:

        Something that I would add to this list that captures many of the items is the notion of “authenticity.” When you engage students in project-based learning such as making a movie or designing a visual essay, students feel like they have a real purpose. Their work will be viewed by others, and this really motivates students to push a little bit harder. Giving students the freedom, space, and resources to work on something meaningful is a powerful recipe for empowering learners.

        I also want to comment on teacher-disposition. A lot of people who visit my classroom think that I have all the answers for technology integration, but let me tell you a secret — I don’t. Almost every day, a student or teacher will ask me a question about how to do something, and I won’t immediately know the answer.

        And that’s okay.

        Because one of the most important things I can model for my students is the act of troubleshooting and problem solving. If I can’t figure out how to do something, I’ll hop on the internet and poke around until I can find the answer. I think a lot of teachers avoid technology because they’re not confident in their ability to work with it, but you can find a whole lot of information just-in-time as you need it online. Don’t let a lack of confidence divert you from trying some of these projects.

        Next week, we’ll dive into Part 1: Reading and Writing to Launch Moviemaking. If you haven’t already picked up a copy of this book, I’d highly recommend it. And it’s not too late to join in the book study! In fact, you’re only 14 pages behind! 🙂

        If you are reading this book, I’d love to know what you think. Leave me a note in the comment section!

        Happy reading (and writing)!

        This post contains affiliate links, but I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

        Workout Anytime Featured in Franchise Times

        Workout Anytime was recently featured in the Franchise Timesin an article titled, “Nest Eggs: Done right, a rollover of retirement funds can be smart option”.

        The article is a trend piece on franchisees using their 401(k) to purchase their business. John Heifner, Workout Anytime franchisee, gives great insight into how he went about purchasing his Workout Anytime with the use of his 401(k). He went on to say “Starting our third year, I can start thinking about funding a retirement again instead of keeping my money more fluid for cash flow.”

        Click HERE for the full article or begin reading below:

        Nest Eggs

        Done right, a rollover of retirement funds can be smart option

        By: Jeffrey McKinney
        More franchisees are using their 401(k) retirement funds to finance the purchase of a franchise. Who should consider the move? Experts explain the do’s and don’ts, including warnings about strict IRS rules.

        Jeremy Turner’s decision to pretty much tap out his retirement funds to buy a Lawn Doctor franchise was very clear: He calls it the best option he had after banks would not lend him the money.
        Turner withdrew $70,000 from his 401(k) plan and another $30,000 he and his wife had in savings to start the lawn care business in St. Louis in 2010. Turner says he discovered companies charge around $5,000 to help complete the financing process. “I would not suggest that someone try to do this on their own because of tax and other risks involved,” he says.

        CONCEPT INTERIOR DECORATORS NYC

        Interior Decorators NYC

        Interior Decorators NYC, there are many different benefits to live. Here, culture, food corners, training, and last but not least, the lounge and bar. If you want to spend a night in the city that never sleeps, then to New York City is a great bar, club and lounge, in particular to go. There are several rooms, and also spread throughout the city. live musicians are the best features of these lounges and bars. You can find indie rock band a lot of volume, and other local bands. Part of the show in New York City, a tremendously well. They are tastefully decorated, and the crowd, which is very appealing. These amazing living space in this late night to win the House, hip hop and youre likely to find one that will fit your musical taste.

        They offer large crowds and expensive liquor and very elegant. The interior decoration of these rooms are for lights, big boost mood of the series, in fact, people also benefit from seeing the crowd warm with loud music and too much light. Interior Decorators NYC always find some very funny and what’s better than a bar, club lounges and especially where you can make your night of fun. Once your stomach is full with the best drinks in the theaters of New York, then is time to rock and roll music and if so, what better than a living room and also in New York, where fun begins.

        In addition, these shows are also very useful during the time of the wedding reception. People are now tired of planning parties in hotels and other places. now part of wedding reception is poured into large halls, where people enjoy the maximum level. New York reception halls are simply incomplete without drinks. Here you can plan a cocktail, and also a bachelor party incurred prior to marriage. You can enjoy unlimited drinks which is great taste and you can also enjoy the loud music here. This part of reception or a cocktail can be fun with friends and other relatives. You know some reception includes dancing and fun, and this is the basic ingredient and that is what makes a great party for everyone. It is therefore the reception of the show is so famous in Interior Decorators NYC.

        Interior Decorators NYC
        Interior Decorators NYC

        1923 Buick Roadster with a cool spare tire lock and tool kit

        And More: Deals and Sales – End Of The Month Specials (February)

        The transition from February to March this year isn’t seeing a ‘ton’ of games on special sales, but there are a few deals on almost every gaming/dealer website (some are only on for the weekend and some last until the middle of March, see each sale you are interested in for details):

        Steam, Valve’s storefront has a Spotlight Sale of Sniper Elite: Nazi Zombie Army (1 & 2), which can be purchased together in bundles or 4-Packs to play with your friends and is their Weekend Deal:

        Sniper Elite Nazi Zombie Army Sale Page
        Sniper Elite Nazi Zombie Army 2 Sale Page

        also on sale
        Trine is on sale for only One Dollar (90% off), or get Trine 1&2 for $3.74
        Warhammer 40K: Dawn of War II: Retribution is on sale for $7.59 (75% off)
        Alternativa is on sale for only $1.29 (90% off)
        The Sims 3 is on sale for $7.99 for those who haven’t played it yet (60% off)
        Kung-Fu Strike: The Warriors Rise is on sale for only $1.99 (80% off)
        Moto GP 13 is $12.00 (70% off)

        Gamefly, the storefront that you can also subscribe to (that took over Direct2Drive in 2011) has a few sales going on, one featuring all 2K Games titles at 75% off:

        (click image to see Full Size)

        also on sale
        Bioshock is $4.99 (75% off)
        Bioshock 2 is $4.99 (75% off)
        Bioshock Infinite is $9.99 (67% off)
        Borderlands, Game Of The Year Edition is $7.49 (75% off)
        Borderlands 2, Game Of The Year Edition is $19.99 (50% off)
        Duke Nukem Forever is $4.99 (75% off)
        Civilization V is $7.49 (75% off)

        GamersGate, the storefront formerly part of Sweden’s Paradox Interactive has a bunch of sales going on as well:

        (click image to see Full Size)

        also on sale
        Call of Juarez: Gunslinger is $9.72 (46% off)
        with Battlefield 4 is out, Battlefield 3 is on sale for $4.99
        Sniper Elite V2 is on sale for $7.50 (75% off) or get the
        Sniper Elite V2 Collection (which includes: Sniper Elite V2, the Sniper Elite V2 Kill Hitler Pack, the Sniper Elite V2 The Neudorf Outpost Pack, the Sniper Elite V2 Original Game Soundtrack, and the Sniper Elite V2 The Landwehr Canal Pack DLC) all for $13.75 (75% off)
        The Tropico Trilogy Bundle (which includes: Tropico, Tropico Paradise Island, Tropico 2 Pirate Cove, Tropico 3, Tropico 3 Absolute Power) all for just $4.99 (75% off)
        and last but certainly not least
        The Total War Master Collection bundle (which includes: Empire: Total War, The Medieval 2 Total War Collection (M2TW and the M2TW Kingdoms Expansion Pack), Napoleon: Total War™ Imperial Edition
        Rome: Total War Gold Edition, Total War Battles: Shogun, Total War SHOGUN 2, the Total War Shogun 2 E-Guide, Total War Shogun 2 Fall of the Samurai, and Viking: Battle for Asgard) all for $25.00 (80% off, regular price $124.99!)

        Once again, some of these are only on for the Weekend and some last until the middle of March, so check out the sale you are interested in for details. I hope you catch something you want – and See You In The Games!

        Deals And Sales – ‘Things Goin’ On This Weekend’ (Weekend of August 11th, 2017) [Notification]

        Just a quick Notification of some things going on… Once in a while, I try to post about Sales going on somewhere – especially the ‘big’ ones, like Summer’s End or Christmas Sales. This weekend, there are a few ‘Free Weekends’ and Sales going on (that I saw so far) and thought I wanted to share them, just in case there were others interested in these games, heh. Here’s what I saw is Goin’ On This Weekend:


        Guild Wars 2 Expansion (Path Of Fire) is Free To Try all weekend:

        https://www.guildwars2.com/en/news/get-ready-for-the-guild-wars-2-path-of-fire-preview-weekend/

        GOG.com (formerly Good Old Games) is having a couple of Sales on games which include series like Master Of Orion, Warhammer 40K, Painkiller, Delta Force, Red Faction and at the same time having a sale on Strategy Games like Codename Panzers, Men of War, Hybrid Wars, Total Annihilation, Empire Earth, and more:

        https://www.gog.com/promo/20170807_weekly_sale
        and
        https://www.gog.com/promo/20170811_special_promo_strategy_sale

        Some other games, which are Free To Try all weekend via Steam, are:

        For Honor, the medieval swordplay/battle game is Free To Try all weekend and selling for half-price
        (for those that remember Die By The Sword, it looks like it may be similar to that, but in an ‘arena’ setting [sorry, but I haven’t been able to try it yet]):

        http://store.steampowered.com/app/304390/FOR_HONOR/

        Saints Row IV, from the crazy “each game is increasingly like GTA-on-drugs” open-world/action
        series, is Free To Try all weekend and selling at a reduced price
        [I haven’t tried it yet, but I am still playing the wacky Saints Row III once in a while and still getting a kick out of it]:

        http://store.steampowered.com/app/206420/Saints_Row_IV/

        Sorry I didn’t get to finishing this sooner, but the weekend isn’t over yet! Get out there and try these games out or grab something you want on sale – and maybe See You In The Game!

        Edit:

        I completely forgot one more I was going to post in here! 

        GamersGate also has some games on Sale right now, including Borderlands (for five bucks!), the Mafia series, Bioshock series, Xcom series, and more:

        https://www.gamersgate.com/offers

        [Note: I am not affiliated with these game sites, nor do I receive any compensation for mentioning them here (the Links do not have any ‘affiliate tags’ or similar additions to them) – I am merely an enthusiastic gamer and like to share deals and other goings-on with other gamers like me. Enjoy!]

        What Kind of Protein is Best?

        There is a lot of confusion about “superior” and “inferior” proteins—so called “complete” and “incomplete” foods. At the beginning of the century, researchers doing animal experiments discovered that rats could live and grow on a single food such as eggs. Eggs, like meat, fish, and cheese, were therefore dubbed “complete” proteins. Vegetable foods such as rice, legumes, seeds, nuts, corn, and wheat were called “incomplete” since on their own they were unable to maintain life and growth. What all this meant is that the so-called “complete” proteins contain all the eight acids which humans cannot make for themselves in adequate amounts. But what they didn’t take into account is that vegetable food—say, corn— together with another—say, red beans—also contains the eight essential amino acids and, provided you eat one vegetable together with another, you are getting the full complement of the eight essential amino acids in good balance. Better still, you are getting them without the fat that accompanies protein from animal foods. The idea that we need animal foods in order to be healthy is simply untrue. Populations numbering in the millions in different parts of the world have lived and developed enviable health and strength for thousands of years on a purely vegetable diet.

        Diet Start

        The best—and often the cheapest—sources of protein are the unrefined, unprocessed vegetable foods—complex carbohydrates complete with their natural fiber content, vitamins, and minerals—whole grains such as rice, wheat, oats, barley, legumes including lentils and beans; mixed seeds or mixed nuts; fruits, and vegetables from salad greens to carrots and potatoes. Eaten together in salads and casseroles, bread and soups, they provide low calorie menus without the danger of high fat from the intake of animal foods. The Lifestyle Diet provides 15 percent of your daily calories in the form of protein. It allows you to eat four ounces of meat, fish, or poultry (preferably fish) three times a week. On the days when you choose not to eat these foods you can have instead four ounces of mixed nuts or two eggs. It completely eliminates all cheese except those such as cottage cheese and curd cheeses made from low-fat milk.

        If you prefer, you can take all your protein from vegetarian foods. The question of a vitamin B12 deficiency on a vegetarian diet is always brought up as evidence of the need to eat meat, although long ago biochemist Schweigert of the American Meat Institute researched the question and discovered that the need for B12 rises and falls with the amount of protein eaten. B12 is available in dairy products and eggs included in the Lifestyle Diet. In this kind of protein-economical diet it is correspondingly low. Schweigert also discovered that the whole wheat grain is a usable source of B12 provided it is not processed into white flour. If it had not been, then the millions of people in different countries who have lived almost exclusively on a vegan diet (vegetarian with no milk, dairy products, or eggs) would have suffered B12 deficiencies.

        Fads Pose Dangers, Don’t Listen to Dietary Fads

        However, we need to be careful on this question of diet. Many different ideas are prevalent today. Don’t believe all you hear. There may be some elements of truth in a few of these dietary fads, but usually there is some foolish notion hidden underneath that is neither in harmony with science nor with common sense. Don’t be misled.

        Regardless of the many fantastic claims that you may hear, there is no one perfect food. There is none that will meet all the needs of the body any more than there is one perfect material that will serve every purpose in building a house. The best diets are those in which there is plenty of variety. Then if any particular element is lacking in one food, it may be amply provided in another. This is one excellent way of avoiding deficiencies in your diet.

        Variety is most important. But it is not the complete answer. We must also use discretion in the choice of foods. Some things that may look tasty are not always healthful and nutritious. Foods that are highly refined are less likely to contain the vital elements to meet the needs of the body. Modern food processing may have its good points. But sometimes the vitamins and minerals are lost in the refining process. It is better to use fresh foods whenever they are available. But be sure that they are really fresh.

        Diet Start

        Some people tend to think that malnutrition is a problem among the less-favored classes of the world. While this is true, it is surprising how often those with higher incomes also suffer from a different type of malnutrition. They eat plenty of food, but mostly of the wrong type. This so-called “hidden hunger” is very common in large cities, where more artificial living conditions prevail. Modern methods of marketing are providing a wider range of foods. But far too many people still prefer to live on devitalized foods that are woefully inadequate. It is these devitalized foods that lead to hidden hunger.

        Such diets fail to provide the body with the right building materials that will keep it functioning properly. Foods that contain a high concentration of sugar and other carbohydrates may provide energy, but other important elements are usually lacking. Soon the organs begin to lose their normal powers of operation. The vital processes of the body are slowed down, and a toxic condition develops. The delicate balance of nature is upset, and the whole body suffers.

        It is amazing the amount of food that one person may consume in his lifetime. Someone has estimated that we eat up to 1,400 times our own weight in a lifetime of seventy years! Think of how much money we spend in buying all this food! Surely such an expenditure as this is worthy of our closest study. Are we buying health, or weakness and disease? A balanced diet is the very best type of insurance against those degenerative diseases so common today.

        It is true that diet alone is not the answer to all of our health problems. Other things must also be considered. But a well-balanced diet will always help to restore those body tissues that have been laid waste by serious disease. And what fun we can have while we are getting well again! So much depends on the attitude of the mind.

        Mental Attitudes Important

        Centuries ago the wise man gave us a great scientific truth when he said, “A merry heart doeth good like a medicine.” This is absolutely true. It is the optimistic person who usually makes a good recovery. Because he is happy in himself and confident in the future, his health naturally begins to improve. His whole body responds to the sheer joy of living.

        But the wise man did not stop there. He also added these significant words: “A broken spirit drieth the bones.” This observation is just as true as the other. A pessimistic attitude soon affects the whole body. It slows down the circulation of the blood. It interferes with good digestion. It takes all the joy out of living. In the end, it may so completely change the individual that he becomes old and worn out long before his time.

        Our mental attitudes are very important, particularly as they affect this question of diet. Many of us are shortening our lives without fully realizing what we are doing. Some of us eat too much, often for no other reason than to soothe our injured feelings. Or perhaps we do not take time to eat sensible meals. We grab something and run. We are in too much of a hurry. Then we wonder why we are weak and sick. We do not seem to realize that our diet has much to do with our endurance and also with our ability to resist disease. All the vitamin pills in the world will not make up for the lack of a sensible way of living.

        Millions of people are spending fortunes trying to win back their lost figures and restore their flagging energies. All they needed was to apply a little common sense in the first place. No one can hope to have an attractive appearance, a healthy skin, and a clear mind unless he is willing to use discretion in choosing his meals. Even good foods, if taken to excess, may destroy the vitality of the body. Anything that is overdone may cause trouble, even too many vitamins.

        A balanced diet is the very foundation of good living. To keep the body functioning smoothly and efficiently, it must be supplied with a constant stream of essential nutrients. This must be clear to all. Yet, it is a shocking fact that many farmers and dairymen are more interested in how they feed their cattle than in how they feed their children! Of course, it pays to see that cattle are well fed. But isn’t it time we begin to think about ourselves and our children as well?

        Today, thanks to modern medical discoveries, we have less to fear from serious infections. But degenerative diseases are becoming more frequent on every hand. How can these be avoided in your own particular case? This is something you should feel free to discuss with your own family doctor. He is the best one to advise you on such matters. But there is no question that a good, sensible diet will always help. And when we follow such a program, we will feel stronger and more energetic, our mealtimes will be happier, and we can look forward to enjoying better health for years.

        The carb connection

        Carbohydrates are a vital part of the human diet – they are our primary source of energy, and in their natural state they are turned into glucose to provide fuel for all the organs of the body.

        THERE ARE THREE MAIN TYPES OF CARBOHYDRATES:

        1. Simple sugars, or monosaccharides: glucose (blood sugar), and fructose (fruit sugar)

        2. Double sugars, or disaccharides: lactose (milk sugar)

        Diet Start

        3. Complex carbohydrates, or polysaccharides: starches and cellulose (potatoes, rice, grains and dietary fibre).

        The simplest carbohydrate of them all is glucose, which is assimilated immediately by the body. The more complex the carbohydrate’s structure, the longer it takes the body to convert it into energy – so ‘complex’ carbohydrates are the slow burners, because they are higher in more complicated sugars and fibre and thus take longer to break down into energy-giving glucose.

        So why are carbs the bad guys?

        Even though carbohydrates are a vital component of our overall health, there are certain carbs that serve no nutritional purpose whatsoever, and can even cause us harm if consumed too regularly and in large proportions. They are also the main contributors to the escalating obesity problem. So who are these enemies of our health and weight? They are known as refined carbohydrates.

        The problems started the minute we began to process our food and strip out the fibre and nutrients from flour and sugar, to make them look appealingly white. In so doing, we made them nutritionally redundant. Food processing removes magnesium, zinc and chromium from flour and sugar – the three minerals that the body needs to metabolize carbohydrates properly. It also drastically reduces vitamins B1, B2, B3, calcium and iron.

        Junk foods made up of refined flour and sugar, plus nutritionally empty processed fats, colourings, flavourings and preservatives, make up 75 per cent of many people’s diets. These so-called ‘convenience foods’ are ’empty’ calories, which hurtle into the bloodstream, play havoc with insulin and blood- sugar levels and actually deplete the body of essential vitamins and minerals that are needed to perform other important bodily functions. Processed foods have also been stripped of their fibre content, which is essential for controlling insulin production and protecting the body against diseases such as diverticulitis and colon cancer.

        Beautiful Bed Room Design Sample

        Beautiful Bed Room DesignBeautiful Bed Room Design

        Beautiful Bed Room Design MinimalistBeautiful Bed Room Design Minimalist


        Beautiful Bed Room Design ElegantBeautiful Bed Room Design Elegant


        The hottest color of 2010 is Beautiful Bed Room Design which is a strong color that must be used as a complement with lighter tones so as to not overwhelm the space and to make it look classy and fun.In the pictures above you can see a beautiful turquoise interior starting with the chandelier and ending with pillows.It’s a good combination between turquoise and floral tapet from walls.

        And More: The EULA Keeps Popping Up When Starting Sony’s Vegas Video Editing Applications (FIX)

        Since the most popular answer on the ongoing poll I have running here at the blog (“what type of posts would you like to see more of in 2014” [top right, it will run until the middle of the year]) is “Tips And Tricks Of Video Capturing And Editing”, I thought I would start more of these types of requested posts by sharing this fix for a problem that seems to pop up intermittently with Sony’s Vegas line of products.

        Whether you have just re-installed it or whether it has been on your system for a while, ‘something’ is causing the EULA (End User License Agreement) to pop up and require you to agree to it, even if you have already done so and/or Registered the program. This question comes up once in a while on the Sony Creative Software Official Forums and I have seen it elsewhere. I was recently reminded of it again because it is also something that just happened to me on my system! I didn’t re-install Vegas or make any large changes related to Vegas, yet this little guy started popping-up every time I started up Vegas Movie Studio HD**:

        The popup that comes up for some people, every time they start Vegas

        The fix is a simple one, originally suggested by a Sony Forum Moderator and quoted/forwarded frequently on the official forums, to those who come and ask the question there. Although it seems more like a ‘workaround’ than a ‘fix [in my opinion], it works just fine and since it is officially supported by Sony and I just tested it for verification myself [that it does indeed solve the problem], so now I share it here with you:

        • To stop the EULA popping up every time you start Sony Vegas, simply open Windows Explorer and navigate to the folder where you installed it on your system. 
        • Then, find the file that is titled, simply, “eula”. There will be no Extension showing, even if you have the Windows option to ‘Hide Extensions For Known File Types’ turned off. 
        • Rename (or delete) the file. That’s it! 

        Now the EULA cannot pop up anymore and won’t, every time you start up Vegas to edit your game captures.

        **Although this example shows steps for the Movie Studio version of Sony’s Vegas Video editing line, the EULA ‘fix’ is the same steps for Vegas Pro, Vegas Edit or other versions of Vegas

        Enjoy popup-free video editing once again – and See You In The Games!

        Workout Anytime in North Fulton Newspapers

        Workout Anytime in North Fulton Newspapers in an article titled, “New Workout Anytime coming to Milton.” The article begins with information about the new Workout Anytime opening in Milton and the owners. The article then goes into details about what you can expect at aWorkout Anytime, with a quote from Randy Trotter. General Manager Chris Maier is quoted about why he believes in the Workout Anytime model and Lynn Jackson is quoted about why they’re happy to open in the area. The article closes out with info on how to join and about the expansion plans for Workout Anytime.  Click here for the entire article or begin below.

        New Workout Anytime coming to Milton
        By: Caitlin Wagenseil
        MILTON, Ga. — When two members of a gym found out their beloved workout place was going to close down, they decided to take action. 

        Paul and Lynn Jackson, previous members, bought the Workout Anytime in Cumming. Now, they are gearing up to open their second location in Milton with Randy and Heather Clevenger.


        (Read More)

        a passenger train in India had a most unusual issue, 22 carriages carrying 1000 people, got disconnected from the engine, and the emergency brakes didn’t work to stop it, it rolled backward 7 miles

        http://www.bbc.com/news/av/world-asia-india-43697965/engineless-runaway-train-in-india-gives-passengers-a-scare

        Paperless Mission #12: Collecting Student Work

        This is the twelfth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

        Mission #12: Collecting Student Work

        Recently, I shared how I distribute student assignments through Dropbox. Today I’m going to share how students turn in those assignments. To do that, I primarily use Edmodo.

        Once you’ve created an assignment in Edmodo, students will be able to see it as they log-in.

        If it’s just a text-based assignment, they can type the text in the comment section and submit it.

        Often, however, my assignments tend to require them to include an attachment of some sort. These can fall into a couple different categories.

        Photos & Movies

        The Edmodo app allows you to load photos directly from your camera roll as an attachment. Just select “Attach: File.”

        Documents produced in other apps (e.g., Pages, Keynote, etc.)

        This process has a couple extra steps, but it’s still easy to accomplish. First, students will need to load the item into their backpack. This is normally accomplished through the “Share and Print” option in the original app. For example, in Pages, you have the option to “Open in Another App.”

        This will result in the file being added to the student’s Edmodo “backpack.” Once it’s there, students can attach it to an assignment by choosing “Attach: Backpack.”

        Once the items are selected, students get to rate the assignment using the emoticons and click “Turn In Assignment.”

        From my perspective, it’s a dream. I don’t have to worry about receiving “No Name” papers, and I can quickly grade and comment on student work that’s turned in.

        Apprentice Guides

        One of my back to school projects is to make step-by-step tutorials to help students (and teachers) with some of these iPad tasks. The first one is on Turning In Assignments from Pages to Edmodo and you can download a copy of it here.

        I apologize that the image quality isn’t perfect — it lost something when I uploaded it to Google Drive for sharing, but it’s still very functional. (I’ll share higher-quality imaged versions later when I get more completed.)

        What programs do you use to collect student work electronically in your classroom? I’d love to hear in the comments section.

        My Free Font, Just For You™: LED SCREEN GTAMBLOG CAPS+ 2.0 (with Download Links)

        An awkward name perhaps, for an odd little, simple version of an “LED Screen / Scoreboard Style Capitals Only” font (including Punctuation and Accents!) – but years ago, I contacted the author of a similar-styled font, to ask specifically for Commercial Use of his font, that looked somewhat like this one [I have been using it “Officially” here at The Blog since then – you can see Examples of it all over this site, on the images].

        Today, I found Fontstruct, an easy-to-use, free, online Font creation utility – and thought “why don’t I make my own version this font, not only for ‘The Blog’ to use, but for others to possibly use as well?”.
        And so, here is an ‘LED Screen’ or ‘Dot Matrix’ style font (also usable as a ‘Pixel font’) – with punctuation and a couple of ‘accents’ – but capitals only, as traditional LED Screens or Scoreboards (“Score Screens”) would have used; made by my hand, Just For You™…

        I am distributing it as “LED SCREEN GTAMBLOG CAPS+ 2.0” by ‘Troy from The Game Tips And More Blog’, at various Font sites, such as those below (for Downloading, Updates as I add more and/or am approved by them). [If you prefer, contact me via email and I can also send you the TTF or Zip of the Font, from me, directly]:

        • Fontstruct (where I created the font by hand): 
        • https://fontstruct.com/fontstructions/show/1459839/led-screen-gtamblog-caps-2-0

        • Fontspace: 
        • http://www.fontspace.com/thegametipsandmoreblog/led-screen-gtamblog-caps-20

        Feel free to Comment on those sites, or here (Suggestions, Questions, And More) or contact me via e-mail if you have any questions about the font, at:
        [email protected]

        Usage License: (Creative Commons, Attribution License, 4.0)
        You are free to utilize this font for ANY purpose whatsoever, including Commercial Use and Monetization of any kind, Royalty-Free; the only condition being that you mention my name somewhere, anywhere, during use of this font.
        If you would like to make a Donation, on behalf of using this font, you may do so via PayPal, using my email ([email protected]), but this is not required at all, to use this font for any purpose you desire.

        As some of you may know, I have been playing around with Fonts off and on, creating them for various images/headers/etc here at The Blog over the years, compiling at least 4-5 fonts or so from scratch, with varying levels of completion… I ‘m not sure when I’ll get around to finishing all of them – but for now, I hope this font can perhaps be useful for some quick images, videos, or whatever you may want it for – Enjoy!

        Edit:
         I may return and add some images and examples of the font… Soon™
        Also, although I have made this font by hand at the Fontstruct website, I always suggest that you Scan any files you download (just in case), with an Anti-Virus utility of some sort – whether it is Windows Defender (built-in to Windows 10, after downloading) or via an online scanner/website, such as VirusTotal.com or similar.

        Monitoring weight loss

        There are two schools of thought on how to monitor weight loss:

        • Daily weighing
        • The once-weekly weigh-in.

        This is an individual issue. If you are the sort of person who needs a daily date with your weighing scales, then by all means do so. Keep a record of your progress using a chart like the one opposite. You may see weight-shifting patterns emerging and be able to isolate foods that have a negative effect on your weight. If you prefer the surprise-at-the-end-of-the-week, that is fine too. You should still keep a record and watch out for any plateaux where weight loss dries up, which may mean that you need to lower your carbohydrate levels or increase your physical activity.

        Whichever your preferred monitoring method, keep a tight-fitting pair of trousers or other item of clothing and try them on regularly to establish how your shape is changing. Your weight may stabilize for a while, and if you are exercising regularly and increasing your muscle-to-fat ratio you may even may weigh slightly more for a bit, but you will be fitter and – in the end – leaner.

        Diet Start

        TOP ANTI-SNACKING TIPS

        • Try not to snack while watching television, playing video games or using the computer. Eat meals and snacks in the kitchen or dining room, so that you are more aware of what- and how much — you are eating.
        • When you feel a snack attack coming on, run a bath, go for a walk, ring a friend… Do anything that will keep you away from the refrigerator.
        • Don’t go shopping when you are hungry — it is then that you may reach out for that chocolate bar.
        • If you are going to snack, make sure it is a protein snack.

        Dietary demons – and how to beat them

        1. Not so well-meaning friends and family members: one of the mostdifficult things to deal with is the friend or relative who tries to sway you off-course. Don’t be bullied into breaking your resolve. Decline politely andexplain that you are relying on them for support. If you are visiting them,take a whey-protein smoothie with you.
        2. Boredom: you shouldn’t get bored following the plans,because there are so many different things to eat and ways to prepare your food. Even if you aren’t a natural cook, experimenting in the kitchen willkeep you motivated.
        3. Alcohol: you are allowed a couple of glasses of wine when you start the
        4. Keep on Tracking Plan, but don’t be tempted to have more. There is nothing like a little extra alcohol to persuade you that you’ll start againtomorrow. Avoid the ‘drunken munchies’.
        5. Snack attacks: the three dietary plans allow for a couple of high-proteinsnacks each day between meals, but you could easily undermine all your efforts by hitting the biscuit jar in a moment of weakness. Clear out anything vaguely tempting from your refrigerator and cupboards, and be very carefulat times when you normally seek comfort food.

        Curb your cravings by curbing your carbs

        When you start eating more healthily and reducing the amount of potentially addictive carbohydrate-laden foods, you should find that your cravings begin to diminish as your blood-sugar and insulin levels even out. This will usually take about 48 hours when you start the Fast-Track Plan. If you do get a ‘snack attack’, try making yourself a whey- protein smoothie; or keep a plate of cold chicken in the refrigerator for weak moments. You can’t necessarily kill a craving, but you can wrestle it into submission.

        INSPIRING DESIGN DETAILS LOOKOUT HOUSE

        Inspiring Design Details

        Inspiring Design Details

        The project is located atop a hill in Fairfield County, Connecticut, and has stunning views of distant Long Island. Depending on the shape of the original designers of the pyramid house, centered on the height of an open plan double lounge around an indoor pool, has been simplified and facilitated through a range of modern materials (including bamboo, stone blue tiles and glass) and a new lighting program. A glass bridge “architecture synapse“, which clearly distinguishes old from new connects the main house for the master suite.

        As the original structure, the new suite contains a large volume a little, in this case, a cube on foot, finished Claro walnut that divides the rest areas and bathrooms. billiard room “in the first photo is the most spectacular part of the house, offering an ideal place for socializing and relaxation. And as you can below, a resident has another pot, this time integrated nature

        Inspiring Design Details Rest Room

        Inspiring Design Details Rest Room

        Inspiring Design Details Dining Room

        Inspiring Design Details Dining Room

        Inspiring Design Details Kitchen

        Inspiring Design Details Kitchen

        Inspiring Design Details Bedroom

        Inspiring Design Details Bedroom

        Battlefield Hardline: A Double XP Boost is Currently Active! [Notification]

        Just a quick post to notify those interested in Hardline that a Double XP Boost is Currently On! GOGOGO http://battlelog.battlefield.com/bfh/

        See You In The Game!

        WORKOUT ANYTIME in Albuquerque Business First

        WORKOUT ANYTIME in Albuquerque Business First

        WORKOUT ANYTIME VP of Development Randy Trotter was recently featured in the Albuquerque Business First. The article begins with information about WORKOUT ANYTIME and why Albuquerque is ripe for the concept to enter the market and grow. Randy is quoted about the franchise opportunity and they provide information about financing needed to open a location. The article goes on to touch on the real estate footprint. The article is ended by providing Randy’s cell phone number for anyone interested in a franchise.
        You can view the full article here.
         

        Gain weight especially fat: Here’s what make you do

        1. Food reactions cause fluid to surround invading food particles. When food macromolecules are identified as foreign invaders, your body launches the inflammatory response, which includes flooding an area that’s under attack. Your body will hold onto this water as long as reactive food substances remain in your tissues. This water dilutes these substances and reduces their effects, but at the same time the cells and tissues swell with water. This often accounts for swelling under the eyes and chin, in the hands, feet, ankles, and midsection.

        2. Food reactions release hormones that cause fluid retention. To offset the effects of the allergic inflammatory response, the body produces hormones, such as adrenaline. But these hormones cause water retention. The adrenal hormones cortisol and aldosterone increase sodium uptake, and sodium attracts water to cells and tissues.

        This action also triggers other hormonal changes, apparently through effects of the pituitary gland, which orchestrates your body’s ‘hormonal symphony.’ These other hormonal changes may include excessive secretion of anti-diuretic hormone, which causes fluid retention. Anti-diuretic hormone is also often secreted in response to stress, and is commonly released by women as part of premenstrual syndrome. The female hormone estrogen, which can be affected by food reactions, also increases water retention. Furthermore, growth hormone, which helps boost the metabolism, can be depressed by food reactions.

        Diet Start

        Besides these hormones, which circulate throughout the body, food reactions also have strong effects on certain gut hormones (including cholecystokinin and somatostatin), which can cause water retention and swelling directly in the gut tissues. Sometimes, when people experience immediate abdominal swelling after eating, it is due to the influence of gut hormones.

        Because women tend to have more problematic hormonal profiles than men, the hormonal elements of false fat tend to be worse for them. For example, when some menopausal women are given extra hormones, their bloating and swelling increase.

        When people stop eating their false fat foods, however, these hormonal problems usually stabilize quickly.

        3. Food reactions make intestinal membranes swell. There is often pronounced swelling of intestinal membranes, in response to irritation by allergens and in response to hormonal imbalances. This can account for the ‘pregnant’ look that often characterizes false fat. The result of this type of swelling is a feeling of heaviness and congestion in the abdomen, particularly in the small intestine.

        4. Food reactions disrupt cell chemistry, causing fluid storage. Food reactions cause a condition called cellular acidosis, which harms cell chemistry and results in fluid retention. Here’s how it works. The inflammatory response, caused by food reactions, causes calcium and sodium to enter cells, and this attracts water. It not only causes swelling, but also depresses the function of the cells’ energy centres, or mitochondria. When the mitochondria are disturbed, it saps your energy.

        This action also causes even more release of the stress hormones cortisol and aldosterone, which try to correct the chemical imbalance. But this in turn just causes more fluid retention.

        Furthermore, as the food reactions subside, the cells release all of these acidic chemicals into the tissues. This can cause a new round of inflammation and the release of even more protective fluids. Over a long period of time, this tissue acidity can contribute to the onset of degenerative diseases, including arthritis.

        5. Food reactions cause capillaries to leak fluids. As you may recall, many food reactions release chemicals, such as histamine, that make blood vessels expand and contract, in the process leaking fluids into tissues. This leakage of fluids causes further inflammatory reactions, with accompanying swelling. Sometimes this swelling can impinge upon nerves and cause aches and pains. It can also cause hives, due to the swelling of capillaries near the surface of the skin.

        Often, when this fluid leaks out of capillaries, it carries protein with it. This protein in turn attracts sodium, which causes even more fluid retention. The combination of sodium and fluid outside the cells can ‘smother’ cells by making it harder for oxygen to reach them. This contributes to further cell malfunction, and even to the death of cells.

        When cells die, even more water is drawn to the area to flush away the dead cells.

        6. Food reactions cause gas production. Food reactions allow the proliferation of abnormal bacteria and yeasts, and these factors lead to fermentation of food. Fermentation, primarily of carbohydrates, forms wind or gas, including methane.

        Secondarily, it creates by-products of alcohol metabolism, such as the chemical acetaldehyde, and alcohol itself. Both of these substances can impair mood and cognitive function when absorbed by the body.

        Food reactions also tend to slow the natural squeezing of food through the digestive tract by the bowel-muscle process of peristalsis. When food transit through the bowel is slowed, more gas and fermentation products are produced. Also, this `constipation effect’ causes more irritation of the bowel lining. This can create even more gas and can also contribute further to leaky gut syndrome, allowing reactive macromolecules to slip through the intestinal wall.

        Bacterial overgrowth in the small intestine also causes fermentation and gas. This causes pressure and discomfort in the small intestine, because the small intestine is relatively narrow and doesn’t have much room for expansion. Another major contributor to gas buildup in the small intestine is lack of the digestive substance hydrochloric acid, which is abnormally low in approximately 70 per cent of all people over 60. Hydrochloric acid, or stomach acid, also tends to be chronically low in people who are under stress, in people who eat lots of processed foods, and in people with food reactions.

        Gas formation is also increased by use of anti-inflammatory drugs, such as aspirin, which irritate gut mucosa. It can also be exacerbated by antacids.

        In addition, poor digestion also causes increased excretion of the amino acid taurine, which lowers cellular magnesium and slows peristalsis, resulting in more intestinal gas.

        Lastly, women’s menstrual cycles upset hormonal balances, and this also impairs peristalsis.

        All of these factors are insidious. They feed off one another and contribute to bloating and swelling. The result of this entire range of forces is a swollen, distended belly and puffy, spongy flesh all over your body. Until now, you may have thought that this was fat. Now you know it’s not. It’s false fat — and you can get rid of it in a week or less if you make the necessary effort.

        I’m sure you can do it! Every day that you make the effort, you’re going to feel a little better. You’ll look better, too.

        Quick Tip: Fallout 4 – “Get Rid Of Someone You Don’t Like” in Your Settlement (Without Killing Them or Using Cheats) [Suggestion, Text-Only Mode]

        Just wanted to share something that came up, in answering a Question someone asked in the Official Steam Forum for Fallout 4 – in case anyone has a Settler in one of their bases that they really, really don’t like…

        A person asked in the Forum, how to ‘get rid of’ Jezebel‘, whom for those who do not know, is a Robo-Brain type automatron, from the Automatron Official DLC. Without getting into any Spoilers, I’ll just say “she has an attitude”…

        However, because she is a Resident of your Settlement, you cannot easily get rid of her, as attempting to just kill her will set all of the other Settlers gunning for your head in retaliation/defense.

        Also, although she can be Assigned to the Task of, say running a Shop at the far end of Town and ‘stay there’, she is not of much use in that respect – because Robots cannot run Shops/Stores [sadly].

        I thought of using her to start a Supply Line (so her Task/Job will take her out of town almost all of the time and you’ll rarely ever have to see her) – and saw that another helpful Fallout 4 player thought of the same thing – and already posted it as a Reply in the Discussion…

        Still, I could add (as a Tip perhaps); that you can ‘send her away’ even more so by first Moving her to a Settlement that you rarely go to (using the MOVE menu bar command, at the bottom of the Workshop Mode interface).

        You could Move her to Oberon Station perhaps, or The Slog [those are where I normally send ‘people I don’t like’ lol] – anywhere that you normally don’t ‘check up on’ as much as you do your other Settlements…

        Then, after that, Assign her to become a Provisioner and start up a Supply Line (using the SUPPLY LINE menu bar command, in Workshop Mode) between the starting place of where you sent her (“far away”) and another place you rarely go to – that way, you will REALLY never have to see her again!

        [Actually, you may still run into her, as you run into your Provisioners if you journey into the paths between the Settlements you have Supply Lines set up for – but still, if you pick two remote places that you don’t really visit often as her Supply Line nodes (start and end points), then you’ll really rarely ever bump into her]

        Either way, I hope these ideas help any of you ‘get rid of someone’ you don’t like, from a Settlement (and you don’t want to kill them or use cheats/commands to do it). Have fun in Fallout 4!

        Innovative Office Furniture Sets Were Designed by Vitra

        These new and innovative office furniture sets were designed by Vitra and are basically practical approaches to the concept of “Citizen Office”.

        Innovative Office Furniture SetsInnovative Office Furniture Sets

        Innovative Office Furniture SetsInnovative Office Furniture Sets

        Innovative Office Furniture SetsInnovative Office Furniture Sets

        Innovative Office Furniture SetsInnovative Office Furniture Sets

        This term was invented by the company in 1991 and taken to another level with the furniture collections below. Jo Kaiser (manager for the North American branch) gave a statement which summarizes the idea of the project: “we believe you should use an office like you would a city”. In other terms- more comfort while making the most of the available space. Here is further information from the company: “A Citizen Office encourages the occupants to work using a range of postures and to move within the office as much as possible. Working while standing or assuming various casual postures provides variety and relaxation while maintaining employee health. The Citizen’s Office takes us a step further than traditional ergonomics – physical activity is integrated with office etiquette in a natural manner. “

        Quick Tip: Fallout 4 – TAB Key Stopped Working And Not Bringing Up The Pip-Boy? Here’s A Possible Fix [Text-Only]

        I have been having a ton of fun playing Fallout 4 lately [again, building up my Settlements too much and ignoring the Main Storyline!] and ran into a ‘small-but-game-stopping‘ issue where the TAB key appeared to stop working. “Hitting TAB wasn’t bringing up the Pip-Boy anymore..??”

        After doing some Troubleshooting and paying attention to what I was doing and pressing… it turned out to be a very simple issue – the TAB key was ‘locked’ out because of how I had used it in the Console.. Let me explain briefly:

        I was playing around with SweetFX in ReShade off and on again, mainly to take Screenshots as I had lost a ton during a recent Hard Drive failure [as in thousands.. I know… but I don’t usually back up screenshots or recordings].
        To open the Settings/Configuration for ReShade, the hotkey combination is SHIFT+F2.

        Unfortunately, something in this combination of Fallout/ReShade/Windows ‘locks out’ the Shift Key after doing this with the Console open in FO4, and when hitting Tilde again to close the Console, this leaves TAB ‘disabled’ and it no longer brings up the Pip-Boy.

        [This can also happen with the ENB series of utilities, which use SHIFT+ENTER to open and close the interface]

        The Fix for this was simple, once I figured it out: hit Tilde again to open up the Command Console, then hit SHIFT once, then hit Tilde again to close the Command Console. That’s all there is to it!

        Now the TAB key worked and I could bring up the all-important-and-totally-cool Pip-Boy once again! This is just a Quick Tip in Text-Mode only then; but I wanted to get it typed up and posted so that it could start to help out others that have run into this little problem [that seems to occur especially if running ReShade or ENB, in Fallout 4]. HTH

        Workout Anytime in Citizen Tribune

        Workout Anytime in Citizen Tribune

        WORKOUT ANYTIME was recently featured in the Citizen Tribune. The article explains the newest WORKOUT ANYTIME location coming to Morristown, Tennessee this October. It gives background on Steve James and Scott Elliot and how they came about the WORKOUT ANYTIME brand. The article also goes into further detail on the services at the gym and the owners planned community outreach.
        You can view the full article here. 

        It’s Not Just You™ – Battle.Net Issues with Logging In Today [Notification]

        Just a quick post to let others know that if you are having logging in to Battle.Net today (August 1st) that lots of people have been having problems as of this morning. Blizzard has addressed this with a quick note via their twitter, seen at:

        https://twitter.com/BlizzardCS/status/760100687111938048

        Retry or Go Back To Bed? Hmmm….

        For those playing Blizzard/Battle.Net games this weekend, hopefully it will be up soon – just letting you know, It’s Not Just You™ !

        Reverse Lunge with Diagonal Lift

        Lunges are a fantastic functional lower body exercise, and the benefits can be enhanced by adding an upper body component to the basic lunge movement pattern. One of the most productive total body lunge variations is the reverse lunge with a diagonal lift.
        The exercise improves hip mobility in the front of the rear leg, while also increasing strength and stability in the front leg and increasing core strength and mobility. Specifically, it improves hip flexor mobility while training the body to move smoothly in the spiral line. It also encourages proper tri-planar movement.
        Start standing with feet shoulder width apart in upright posture. Hold a medicine ball, dumbbell, or kettlebell (or even a body bar) positioned at the right hip pocket region. Step back with the right leg to perform a reverse lunge. At the same time move both arms diagonally up and back over the left shoulder until a comfortable stretch is felt in the anterior (front) of the right hip. Do NOT allow the back to arch. Pause in this position for one or two seconds.
        Do 10 – 15 repetitions on one side then repeat on the other side. It is important that you keep both feet facing forward and keep your trunk upright throughout the movement.
        Regressions:
        Perform the movement without a medicine ball, dumbbell, or bar
        Start in the split stance lunge position instead of having to step back
        Progressions:
        Increase weight you are holding.
        Perform the movement in an alternating side manner vs one side at a time.
        Video Links: https://www.youtube.com/watch?v=JDyGhcm-aVs

        RELAXING BATHROOM MODERN DECORATION

        Relaxation can be achieved in a variety of ways. If the shape of the tub that makes the difference, decorative items or inspire the idea that you can see, these bathrooms all have something in common with relaxation. Some interiors are rich in green arrangements, which add freshness and energy of the place. He also tried to find some bathroom designs that have a special color.

        LUXURY RELAXING BATHROOM DESIGN

        LUXURY RELAXING BATHROOM DESIGN

        We realized that the wood has a great influence on modern decoration, the first picture, for example, because it adds authenticity and personality. The windows are also of great importance because they have a great influence on the aesthetics and atmosphere of a room. Diagonal windows give a dramatic touch and are welcome if there is a nearby slope. Most of the bathrooms in the following images are modern, but also you will find some classic elements that blend well with contemporary arrangements.

        LUXURY RELAXING BATHROOM LUXURY DESIGN

        RELAXING BATHROOM LUXURY DESIGN

        LUXURY RELAXING BATHROOM DESIGN

        LUXURY RELAXING BATHROOM DESIGN

        LUXURY RELAXING BATHROOM GREEN DESIGN

        LUXURY RELAXING BATHROOM GREEN DESIGN

        LUXURY RELAXING BATHROOM STYLE

        LUXURY RELAXING BATHROOM STYLE

        No Backtracking

        No Backtracking principles

        This is a plan for life. You will carefully reintroduce certain carbohydrates into your diet — and find the balance that maintains your weight and keeps you feeling trim. This crucial phase will allow you to:

        • Establish the carbohydrate levels that you can eat in order to remain slim and supply your energy requirements
        • Break totally with bad habits made in the past
        • Never return to yo-yo dieting
        • Find a healthy attitude to food and a viable eating plan for the rest of your life.

        No Backtracking rules

        During this phase you need to:

        • Increase your daily carb intake by no more than 10g (1/3oz) each week
        • Add new foods one at a time
        • Eliminate a new food if it provokes weight gain; a return of physical symptoms lost during the Fast-Track Plan; increased appetite, cravings or water retention

        Diet Start

        • Drop back to the next-lowest level of carbohydrate intake if you gain weight
        • Carry on eating adequate amounts of healthy fats and lean protein at every meal to ensure a balanced diet
        • Continue to take vitamin and mineral supplements regularly, drink masses of water and, of course, exercise regularly.

        Make this diet the one that works

        Once you have reached your target weight, you can start on the No Backtracking plan. Increase your intake of carbohydrates by 5-10 grams per day until you reach your optimum level for weight management This will probably be around 40 per cent of your total daily calorific intake, but remember that everybody differs, especially when you consider activity levels.

        If you have high insulin resistance, then you may have to Keep on Tracking and be careful about how many carbohydrates you consume on a daily basis. But if you’re one of the lucky ones with low insulin resistance, you may be able to eat most vegetables (including starchy vegetables), fruit, pulses andwholegrains such as oats, barley, millet, wild rice, couscous and buckwheat. You can also begin to use recipes containing carbohydrate ingredients such as breadcrumbs; you may even be able to handle an occasional potato. But don’t eat all these things in one day. You still have to monitor your carbohydrate intake to stay where you are – healthy and energized. Remember the eating habits that got you here in the first place. You should have successfully gauged your ideal carbohydrate level, and be maintaining a stable weight and energy levels, within 4-12 weeks of following the No Backtracking plan.

        Stick to the basic weight management tips and try to be good 80 per cent of the time. We are all allowed the odd slip up – if you want a slab of chocolate cake from time to time, make sure it is the best you find and enjoy it. If you ever see the scales creeping up, cut back, even go back to the Fast Track plan for a few days until your weight is back to normal, and then gradually raise your carbohydrate levels once again.

        A template for life

        Two portions of higher GI carbohydrates are included per day on the suggested eating plan. Treat this as the template you ought to follow from now on. And try some of these tricks to keep your carbohydrates at a moderate, healthy level:

        • Opt for rye bread, oatcakes and rye crackers instead of wheat-based bread. Even if you are not wheat-intolerant, it is worth considering this.
        • Eat fruit 20 minutes before eating anything else, not afterwards. Fruit takes less time to digest, but if eaten on top of a heavy meal, can cause bloating.
        • If you are going to drink alcohol, choose dry white wine or, even better, red, which contains flavonoids with antioxidant and anti-platelet properties thought to reduce deaths from coronary artery disease. If you have managed to kick the alcohol habit, opt for grape juice, which contains flavonoids similar to those in red wine.
        • Mix sweet potato with cauliflower as a mash or purée to go with roast chicken. The aim is to mix a high GI vegetable with a low one, to reduce the total carbohydrate level.
        • When making a rice dish such as risotto, reverse your ratio of vegetables to rice: add a little rice to a heap of vegetables. And try grating raw vegetables such as carrots and courgettes into the dish at the last moment – it adds texture and you get the benefit of all those raw phytonutrients.
        • Don’t give up on those whey-protein smoothies – they are still the most effective way of getting high-value biological protein.

        Knoxville News Sentinel featuring Kurt and April Nitzsche

        Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
        The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
        April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
        You can view the online article here. 

        ROOM SEVEN LEVITATION HOTEL PARIS DESIGN

        SEVEN LEVITATION HOTEL PARIS

        The Last weekend we were invited to spend a night in the bedroom of SEVEN LEVITATION Hotel Paris … A change of scenery, enchanting, and very pleasant … We’ve tested since the beginning of dozens of hotels – from very luxurious to the simple – but SEVEN Hotel remains one of our fondest memories in terms of wellbeing! We literally left “floating”in this room LEVITATION, amid clouds … Here, the amenities of modern life are available starting with a Nespresso coffee machine with tea and coffee and an iPod docking station to listen to your favorite music in this extraordinary place. You will also find a flat screen TV with 4 channels olfactory delight your senses!

        The room of the hotel LEVITATION SEVEN is also a premium bedding, large shower – where you can shower couple – air conditioning, a desk … So comfortable!

        Above a photo of the room SUSPENDED BATH offering a superb tub suspended, and below a small photo of the ABSOLUTE LEVITATION!

        SEVEN LEVITATION HOTEL PARIS

        SEVEN LEVITATION HOTEL PARIS

        SEVEN LEVITATION HOTEL PARIS

        Georgia Bloggers Meet-up

        I was thrilled to get the opportunity to meet up with some other Georgia bloggers yesterday thanks to the organizational efforts of Jayne at Smart Kids. You see, even though I’ve been MIA from the blogging world a lot this year, blogging is always on my mind. Really.

        This year has been a whirlwind as I’ve juggled teaching full-time, parenting, and starting my PhD program. Virtually everything I’ve written this year has included a bibliography, and that hasn’t left a lot of energy for my blog. But when I’ve been researching and writing for my academic pursuits, I’ve been learning all about theories of professional learning and how our online encounters fit into that. I must say, there hasn’t been a lot written about teacher professional learning through blogging, and that’s a gap I intend to fill. More people need to know about the amazing teachers supporting each other through social media. They need to know how that process is 10 times better than any other form of professional development and how it empowers teachers to become better at their craft by pursuing their passions and interests.

        So when I say that blogging is always on my mind, I really mean it. It’s been at the heart of every paper I’ve written as I work on my PhD. When I got the chance to go meet some fellow bloggers, I couldn’t say no.

        The meet up was at Georgia School Supply in Macon, GA–about an hour and a half away from where I live. I was excited to go and meet some fellow bloggy friends because it’s always so good to be able to match names and faces and to remember that there are some real live people with amazing ideas that are working in classrooms, too. I’d never met any of the people there, so it was a real treat.

        We talked about our secret lives as bloggers and TpT’ers, shared tips and strategies, made business plans, swapped products, and had an all around great time. I love meeting other bloggers and learning how much we have in common. Everyone I met yesterday was wonderful, and I look forward to keeping in touch with these new friends!

        I hope to be blogging more this week as my student teacher takes over EVERYTHING from now through spring break (woot! woot!). In the meantime, be sure to check out the blogs from the amazing people I met yesterday!

        Jayne, Kelly, Angie, Stacy, Tara, Valerie

        PhotobucketThe Teacher Wife

        Funky Fresh Firsties

        ...And They All Fall Down...

        Georgia Grown Kiddo's

        Jennifer, Carol, Kathy, Meghan, Kim, Irma, Megan


         
         

        Michelin, Jessica, Greg, Erin, Alison

         

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

        Matryoshka House was designed by architect David Jameson, is located in Bethesda, Maryland, USA. Obeyng unwritten rules concept Matryoshka, the house consists of a series of volumes is one inside the other. According to ‘description’, architects, in essence, a meditation room with suspended center acts as the physical and spiritual for the project. The internal energy market of the meditation room locked in an open, bright. Alternating tread stairs rise participant commits deliberatley eve of the meditation room. The meditation room is surrounded by a wooden container that surrounds the living area of ​​the house. Traditional decorations in turn should have soothed by stucco walls act as a protective layer and ground floor of the house. In-between space of nested volumes strategic cup sun to protect lines of light inside.

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY DINING ROOM

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

        MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

        Berberine – for Cancer Prevention, Anxiety, Depression, Increased Fat Burning, and More!

        Berberine – for Cancer Prevention, Anxiety, Depression, Increased fat burning, and more!

        Berberine is a yellow alkaloid found in several plants/herbs such as goldenseal and phellodendron.   It is a powerful plant chemical with proven antibacterial, anti-inflammatory, anti-diabetic, anti-cancer, and immune enhancing properties.    Herbs containing berberine have a long history of effective use and there is considerable science backing these uses.
        It is also extremely helpful for treatment of seasonal allergies traveler’s diarrhea, food poisoning, and as an oral hypoglycemic for Type 2 diabetes.

        As per Dr. Michael Murray Berberine has been shown to: 
        • Produce results in clinical trials in improving Type 2 diabetes on par or better than conventional drugs including metformin.
        • Improve blood lipid levels better than statins.
        • Lower blood pressure in many subjects as well as any class of antihypertensive medication.
        • Improve liver function and promote anti-obesity effects.
        • Exert significant beneficial effects on digestive health and the microbiome.
        • Produce very encouraging experimental data in a wide range of modern health issues including cancer, Alzheimer’s disease, Parkinson’s disease and others.
        How does Berberine work?

        Berberine activates adenosine monophosphate-activated protein kinase (AMPK).  AMPK is sometimes referred to as a “metabolic master switch” because it plays an important role in regulating metabolism.

        AMPK causes a cascade of effects within cells involved with maintaining energy homeostasis.  AMPK helps shift energy towards cellular repair and maintenance.   It has many of the same effects as increasing exercise while at the same time restricting caloric intake.

        Other benefits of Berberine include:
        • Slowing the release of free fatty acids to help prevent harmful fat deposits
        • Promoting insulin, leptin, and adiponectin function for a healthy metabolism
        • Supporting healthy blood sugar levels already in the normal range
        • Promoting healthy insulin sensitivity
        • Promoting healthy gut microflora
        • Supporting healthy lipid metabolism
        • Stimulating the release of nitric oxide for healthy blood flow
        Berberine Helps Ease Anxiety and Depression

        Another benefit of AMPK is that it protects neurons and increases key neurotransmitters which improves brain function and psychological well-being.  So, it should not be surprising that several studies have shown that Berberine is very useful for anxiety and depression.

        Berberine and Cancer Prevention

        Berberine slows cancer growth and causes cancer cell death through a variety of mechanisms: tumor cell apoptosis and cell cycle arrest, inhibits blood vessel growth to tumors, inhibition of tumor cellular invasion and metastases (spread), etc.
        One of the main anti-cancer targets that is inhibited by berberine is NF-kappa B. NF-kappa B is one of the most important proteins in our cells, acting as a key switch in the development and progression of inflammation and cancer.
        ·       Cancer (and precancerous cells) often have a permanently activated NF-kappa B, which keeps the cells proliferating and prevents them from dying (apoptosis.)
        ·       Chronic inflammation can also be a result of activated NF-kappa B, and we know that chronic inflammation can lead to cancer growth
        ·       Additionally, Berberine sensitizes cancer cells to the effects of radiation but NOT of normal cells. So Berberine may make radiation therapy more effective. 

        Berberine also inhibits the tendency of cancer cells to become drug resistant over time by inhibiting the cellular membrane proteins that pump drugs out of the cell. When Berberine is taken with numerous chemotherapy drugs, studies have shown that they work synergistically to fight cancer.
        Contraindications for Berberine

        ·       Displaces bilirubin and should not be administered to jaundiced neonates (may increase bilirubin levels due to displacement of bilirubin from albumin)
        ·       May cause a prolonged QT (a variable in cardiac electrical conduction) in patients with underlying heart disease
        Drug Interactions

        While Berberine is quite safe and well-tolerated, it may be contraindicated if you’re taking medications.  For example, Berberine may hinder absorption of tetracycline and other similar antibiotics, rendering them ineffective. Also, because Berberine significantly inhibits CYP3A enzymes — enzymes needed to metabolize most drugs — it can lower the clearance of medications, which in turn can augment their effect. This can lead to overdose, the risks of which will vary depending on the drug in question.

        Berberine increases the effects of drugs that lower blood sugar so it is critical that you not mix Berberine with these drugs unless under the supervision of a physician.  IT is important to note that Berberine produces all the benefits of Metformin with much lower risks!

        Sources of Berberine

        Berberine is available as an isolated supplement OR through certain herbs such as goldenseal or Phellodendron.    Nexrutine is a patented Phellodendron Extract with high levels of Berberine that is particularly effective at reducing joint pain, improving mood, and reducing prostate inflammation and likely prostate cancer risk.   Phellodendron also has has a long history of being used to treat prostate inflammation and prostatitis.

        WORKOUT ANYTIME on Entrepreneur.com

        Bill Aicklen, owner of four WORKOUT ANYTIME locations in Georgia, was recently featured in Franchise Players, Entrepreneur.com’s Q&A interview column! Bill discusses his background as a franchisee, challenges he’s faced and why he chose WORKOUT ANYTIME as the business model to get behind. Read the full interview here!

        HOME DESIGN WITH STRONG VISUAL EFFECTS

        Architects honey study apartment has a makeover that is quite original. The project is called “Santpere47” and has many interesting features. gold lines and circles to create a wall decoration that invites a lot of fun to watch.

        HOME DESIGN STYLE WITH STRONG VISUAL EFFECTS

        HOME DESIGN STYLE WITH STRONG VISUAL EFFECTS

        The ceiling is particularly exciting that the pattern is unusual and reminds one of the chambers of the royalties. Storage space is provided unconventional: not a library under the stairs and walls in some places where objects can be placed. The lighting in this apartment is also interesting to compare a second: the hanging lamps are subtle and elegant, and were impressed by the fire escape. The decorative elements are in perfect harmony with the general atmosphere of the house.

        HOME DESIGN WITH STRONG VISUAL EFFECTS

        HOME DESIGN WITH STRONG VISUAL EFFECTS

        HOME LIVING ROOM DESIGN WITH STRONG VISUAL EFFECTS

        HOME LIVING ROOM DESIGN WITH STRONG VISUAL EFFECTS

        HOME KITCHEN DESIGN WITH STRONG VISUAL EFFECTS

        HOME KITCHEN DESIGN WITH STRONG VISUAL EFFECTS

        HOME BEDROOM DESIGN WITH STRONG VISUAL EFFECTS

        HOME BEDROOM DESIGN WITH STRONG VISUAL EFFECTS

        Proven Ways to Avoid Holiday Weight Gain

        As we head into the holidays most Americans will gain between 8 and 12lbs between Halloween and New Year’s Day.  However, there are ways to avoid this weight gain!
        Here are some key tips:
        Eat before you drink and celebrate and before holiday parties.     Going into a holiday party on empty and hungry is a sure-fire way to overeat.    Alcohol intake boosts appetite to begin with and if you start out without anything in the tank it just gets worse!    This does not mean overeating – eat a sensible meal about 2 hours before you go to the party.
        Try to choose higher protein foods first because protein helps with satiety (feeling satisfied and not hungry).
        Fill up on Fiber Rich Foods – which also help with satiety and help create a feeling of fullness when consumed with water.  Focus on the raw veggies and yes you can dip them in some dip that has some fat because together fiber and fat can really assist in managing hunger along with protein.
        Eat some fat – that’s right eat some fat!   Fats also are key for satiety.   That being said a little goes a long way!
        Bring your own food to a party.   Rather than having only high calorie, high sugar and high fat foods bring something you enjoy that is also healthy along with you!
        Eat slowly and chew your food thoroughly – seems simple and it is.    It is also VERY effective for limiting food intake!
        Use smaller plates, bowls and glasses – all of which help to slow down food and beverage intake and make you more conscious of how much you are consuming!
        Try to Minimize Sugar and Starch Intake – both sugar and starch wind up as glucose (blood sugar) and high intake drives insulin which results in rebound hunger.      High sugar and starch intake increases hunger – particularly when drinking alcohol because alcohol acts like a super sugar and also drives insulin response.
        Pause before getting seconds – as with slower eating and deliberately chewing food this can give your body time to realize it is no longer really hungry.
        If you are doing the entertaining have extra containers you are ready to give away so guests can leave with some of the extra food!

        Try not to eat in front of the T.V. which distracts you from how you feel and results in mindless eating!
        Consider planning a cheat meal but have a plan for how much you are going to eat!   One meal can knock you off course but most of the holiday weight gain comes from completely giving up on healthy eating for many meals.   Planning one cheat meal every week and planning on eating a set amount of the foods you may be craving can work for many people rather than mindlessly eating.      If you plan your meal including your portions of alcohol, sweets, fat and sugar you can limit the damage and still have a great time!
        Drink Water.   Often quoted and still true – water is the best beverage and avoiding sugar laden drinks in favor of still or sparkling water can make a big difference in minimizing holiday weight gain.
        Workout!   Working out improves mental outlook and burns some calories while reducing stress levels!    When we are stressed we overeat!   Just 10 minutes a day can make a big difference!

        Get Your Sleep.   Lack of sleep is terrible for your health and particularly bad for driving appetite and overeating.   Lack of sleep causes hunger and excessive eating because the normal feedback mechanisms that tell you that you are full do not work properly when you are tired.   Basically, a tired brain tells you to eat to feel better and it is VERY hard to resist these urges when tired!

        Health Concern: FAT? continue…

        How much Fat do you Need?

        Very little. Just about any food you can think of contains some fat, and when your diet is made up of at least 75 percent vegetables, fruits, and grains with a few nuts and seeds but without added oils, fats, cheese, or butter, as in the Lifestyle Diet, about 15 percent of your calories will be in the form of fat anyway. This is all you need. The body is capable of making its own fatty acids from the foods you eat with the exception of linoleic acid, and the mere three grams you need per day is more than supplied by eating a couple of tablespoons of sunflower seeds or one small dish of oatmeal. Even leafy green vegetables such as kale or spinach contain about 10 percent of their calories in fat. It is hard to be fat-deficient. Studies of people put on very low-fat diets, even when as little as .7 percent of their calories are taken in the form of fat as linoleic acid, have shown no adverse physical or psychological effects.

        Diet Start

        Even official bodies have recently begun to recognize the need to reduce dietary fats for the sake of preserving health. The U.S. Senate’s Select Committee on Nutrition and Human Needs recommended in its report “Dietary Goals for the United States” a reduction of fat intake from the present 45 to 30 percent as well as a decrease in sugar consumption to 15 percent of total calories and a corresponding increase in the consumption of complex carbohydrates—the fruits, vegetables, and grains that are the foundation of the Lifestyle Diet. For long-term health and beauty, you should make an even greater reduction so that only about 15 percent of your daily calories are taken in fat.

        This is in line with the Pritikin and other low-fat, low-protein diets which have recently caused great interest in both the medical profession and the general public. Pritikin recommends a diet of 80 percent complex carbohydrates, 10 percent protein and 10 percent fat. Although a radical departure from the traditional British, European, and American dietary habits, regimens like the Pritikin diet can not only substantially reduce cholesterol and triglyceride levels, high blood pressure, and high blood sugar, but can also lead to an automatic weight loss and leave people feeling and looking years younger. Such a low protein, low fat diet can also literally beautify a woman both physically and psychically.

        At first such a change takes a bit of getting used to, but soon it becomes second nature and the increased vitality, slimness, and good looks it brings you in a few weeks help make it an easy way to eat permanently.

        When these are broken down slowly throughout the day, they provide the pancreas with a steady flow of glucose at a rate of about two calories a minute. When you eat something sweetened with refined sugar, the glucose poured into the system (say 100 calories or more all at once) suddenly soars. So does the production of pancreatic insulin in reaction to the insult. When this insult occurs repeatedly, as it does in the usual Western diet, with its average of two pounds of sugar per person per week, the blood sugar levels become depressed, then soar, then become depressed over and over again by a pancreas made trigger happy. In many people this leads to hypoglycemia or low blood sugar, with its corresponding fatigue and mental and emotional symptoms. It can also result in diabetes and in the development of allergic reactions to foods and to petrochemicals, which have recently been linked with diverse mental disorders as well as many acute and chronic forms of illness.

        Repeated eating of sugar and products containing it can also result in deficiencies in the B-complex vitamins and an imbalance in certain important minerals. And just in case you are reassuring yourself that you, after all, only eat raw sugar, you should know that one sugar is just about as bad as another. Raw sugar does contain some of the natural vitamins, minerals, and fiber that are found in the sugar beets or sugarcane from which the sugar has been taken but raw, brown, and turbinado sugars are all still highly concentrated simple sugars which create the same metabolic problems as white sugar. As such, they are potential disease-makers. The Lifestyle Diet excludes every form of refined sugar—from chocolate to jams to packaged breakfast cereals with their hidden sweetness. It does allow a little honey for sweetening muesli (two tablespoonfuls a day) plus one tablespoonful of blackstrap molasses if you want it for its nutritional value.

        My Trip to Bangladesh Cont…..

        The assignment is proceeding well, the evaluation questions have been designed and the questionnaire and show cards are prepared and translated in to Bangla. I will be using an “In Depth” interviewing technique. The evaluation itself has 2 aspects to it. Firstly; to looking at the internal mechanisms which either makes them effective or not as the case may be (As an internal service provider) and; secondly, getting conformation from outside the Unit (As an external service provider) to establish if they were effective. The main internal interviews have been conducted and now I have to conduct the external interviews. The external interviews are going to be held in the districts of Dinajpur, Nilphamari and Lalmonirhat. I will have to undertake an 8 hour journey over road to get to Sayedpur where I will be based. Hope to get back to Dhaka on the 15th.

        The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

        Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
        Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
        Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
        However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
        The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
        Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
        When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
        How Shoes May be Impacting Your Health
        Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
        Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
        The Health Benefits of Grounding
        Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
        Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
        Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
        All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
        So have some fun, kick your shoes off and get back to nature!
        How to get the benefits of Grounding
        Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
        For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

        And More: Share and Tell – Imitating The GTAV Title Logo Style [Commentary]

        I recently created a logo for The Blog, done in the style of the GTAV game logo (Grand Theft Auto Five Title Logo, seen Left). I had a lot of fun figuring out how to imitate the look of it and wanted to share a bit of how I did it, in case others want to give it a try too, or just to enjoy the ‘Behind The Scenes’ story of things… Originally I was creating this to be used on Headers for posts here at The Blog (since I was playing GTAV lately), but I also put it on a Wallpaper posted at The Blog’s Flickr page – but then decided that from now on, I will not put ‘my logo’ on Wallpapers that I want to share with everyone, I will just use whatever game logo the game is at the time, reserving ‘my logos’ mainly for use here [I was feeling bad for ‘forcing them onto others’ if I were to put them on Wallpaper for sharing with everyone…]

        Just below this paragraph then, is The Blog logo, re-done in the style of the game logo from the game GTAV (Grand Theft Auto Five)… Created entirely in Corel’s Paint Shop Pro, I first had to find a font for the lettering. I found a few of them (Pricedown is one, GTArussian is another, the name of the last one escapes me at the moment). I typed out each word separately, so that I could place them really close together (like the GTAV logo has for its’ words), overlapping some of the ‘tails’ of the text (which was fine, for me). The “B” behind the ribbon was something else… Baskerville, that’s it.

        My version of The Blog logo, done in the style of the GTAV game title logo
        (Click to see Full Size)

        The ribbon was its’ own element, blanked out (white with no text), placed on top of the “B”, which itself was made in layers of outlines and a Gradient, using the original game title logo (“GTAV”) as the source for the green shades (clicking with ‘the dropper’ on the far sides of the green area in the “V” in the GTAV logo). The spiral design was found online by an anonymous maker [let me know if it is you, I’ll give you Credit!], which I had to colourize and then placed in a way that was similar to the GTAV logo, on a layer below the text “B” vectors, so that it ‘shows through’ within the “B” area.

        The text on the ribbon was made with a font that escapes me at the moment, but the colouring for it was hard to figure out, as it looks like it is directional (as though a light were casting highlights from one direction). I figured out to use the Bevel effect in the Layer Styles of Paint Shop Pro, to emulate a light source coming from the bottom-left, for the text ‘The Blog’. It turned out great for imitating the lighting on the text ‘Five’ in the GTAV game title logo ribbon! The hardest part was getting it to ‘curve’. I don’t know how to create a line and make the Text follow the line yet, so I simply used the Mesh Warp function, to ‘move it around’ manually and get it to seem at least a bit like it is curved.

        A few layers of black and grey for ‘outlining’ the text and entire composition (made by ‘expanding’ the selected text and then Filling with Black or Grey, moving the white text in front of it each time) and it was complete…

        I’ll mainly be using it in Headers and Screenshots in posts almost exclusively here, at The Blog. I just thought that some might like to hear a bit of ‘Behind The Scenes’ or ‘Commentary’ about it – hey, there are a lot of people that (like me) watch Commentaries! Haha

        I hope you enjoyed my little Share and Tell – and if you play GTA Online – See You In The Game!

        Original GTAV game logo design by Rockstar, Take-Two Interactive

        [Personal Note/Declaration: I am not associated with, nor do I receive anything in any manner or form, for mentioning Corel or Paint Shop Pro. I am merely an enthusiastic user of the program (I have played with it off and on since it was owned by JASC). For fairness and completivity, I shall mention another great graphic editing program, The Gimp (now just called GIMP?) – which is Open Source and entirely Free – all of the steps above can also be performed with this free program]

        TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

        Raise your hand if you’re a fan of traditional interior design schemes. Because today we are proud to present a wonderful house of fascinating details are located in Gothenburg, Sweden. Seen on Skeppsholmen, the project has a nice open living room, which covers the dining room, as well as the terrace and garden. On the second floor above the living room is furnished with a bedroom in the attic, and storage facilities well. Basement can accommodate storage / boiler room and laundry area with washing machine. The entire house is a charming and traditional, because of the presence of many moving parts in wood and other interesting colored decorations. We invite you to explore all and be inspired!

        TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS BEDROOM CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS KITCHEN CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

        TRADITIONAL DECORATIONS BATHROOM CHARMING HOME IN GOTHENBURG

        Quick Tip: Team Fortress 2 – What To Do With Those Naughty and Nice Winter Crates (Winter 2013)

        By now, most of you have seen these Random Drops, Crates that are either “Nice” or “Naughty” – but, “How do you open them..”, you may have asked? Well, this post is just a quick note to answer this question I have already started seeing on game forums and Question/Answer websites. Answer: You Can’t Open Them (Yet)…

        Soon hopefully, keys should be available for purchase at the Mann Company Store (Steam/Valve/TF2), most likely for $2.49 USD, if keys and dropped crates combinations of the past are anything to go by [I assume they are dropping them now, to allow people to collect some before the keys go on sale – to sell more keys]. So, if you get these [I have already started getting them when playing, hence the screencaps], just wait a little bit longer, until the keys themselves go on sale. Then, if you want to open them, just purchase keys and unlock them! Soon™… (Remember, you will need one key for each crate)

        See You In The Games!

        It’s Not Just You™ – Paladins (Beta), Having Issues Not Starting or Not Running In 64-bit Mode, Battlegrounds [Notification, Updated As Encountered]

        [Currently, this post is mostly in Text-Only Mode, to speed up the ability to publish it… 
        I may return to add some Images and/or Screenshots in the future.
        This post will be Updated for the next few days, as I encounter new related information.]

        If you are trying to play the newest addition to Paladins, Battlegrounds, which is being released in Alpha Testing Stage in their Latest Update – and you are having issues with either (1) the game not launching/starting or (2) the game running in 32-bit mode [which stops you from being able to enter the Battlegrounds, which requires 64-bit mode] – just letting you know, It’s Not Just You™…

        For the past little while, I have been trying to get into Paladins and try out this new Game Mode, and take a look at any new changes; but I have been running into multiple issues with the game itself. If related Paladins Forums ‘everywhere’ (Steam, Reddit, Official Forums, etc) are any indication, many, many others are having issues as well.

        I wanted to take a moment to make this posting because, even though it seems there are a few people that have ‘gotten it running’, there are many others, like me, that have not. I wanted to share this experience and related information, so that others may know that, well… It’s Not Just Them.

        Since I have run into multiple issues and have tries multiple steps so far, I will share them here in Point Form as a list:

        Issues Seen/Encountered:

        • Game not starting [Launcher will start, but game itself will not show up]
        • Game not stopping [Game will not Terminate, Steam says it is Running still, but it is not, or has not started]
        • Game not running in 64-bit mode [Game starts in 32-bit Mode and therefore The Battlegrounds can not be tested/run, as it states in-game “64-bit Mode Required”]
        • Cannot Verify Integrity Of Game Files, via Steam [Steam states to ‘exit any game files or tools’ related to the game, but none are running]

        Steps Taken/Tried:

        • Put “-Use64 [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
        • Put “-dx11” [without quotes] into Optional Game Command Line Parameters (Options/Commands) in Launcher
        • Checked “Use 64 bit Client” in Launcher Options [this has never been ‘unchecked’ by me]
        • Verified Cache [‘double-checked’ the game files through Steam, to see if they are what they are supposed to be]
        Unfortunately, since I cannot make the game ‘run in 64-bit Mode and enter The Battlegrounds’ in a repeated a reliable manner – I cannot make a section containing a ‘Fix’ at this time… I will continue to observe various Forums and Support Responses, try various Suggested Steps (from the Developers and other helpful Paladin Players (there are a lot of them out there!)), and see if I can make any progress that results in stable and repeatable game launching and gameplay. If I do, I will return here and add it as a ‘Fix’ section. 
        For now, despite them not working for me/on my system, there are a few isolated people that have had success with some of the Steps listed. If you are experiencing any of these issues with Paladins at this time, try some or all of them above. Perhaps one of them will work for you, too. 
        Good Luck with it – and try to stay positive, remembering – It’s Not Just You™!

        WORKOUT ANYTIME in the Daily News

        WORKOUT ANYTIME in the Daily News

        Dale Chaffin of WORKOUT ANYTIME Bowling Green was recently featured in the Daily News. Dale was interviewed for the story and a photographer was assigned to take his photo for a story about the WORKOUT ANYTIME location in Bowling Green where he is the GM and how he has lost 80 pounds since 2012 with help of personal trainer Chris Talley. The story focused on how working at a gym has helped Dale with his fitness goals. 
        View the full article here. 

        WORKOUT ANYTIME in the Idaho Business Review

        WORKOUT ANYTIME in the Idaho Business Review

        WORKOUT ANYTIME was recently featured in an article in the Idaho Business Review titled, “New 24-hour Gym Chain to Expand into Idaho”. The article begins with details about the brand’s plans for expansion into the northwest, including Idaho. The article then provides background on how Rick Hascall (WORKOUT ANYTIME Pacific Northwest Area Developer) and Chris Gately (WORKOUT ANYTIME North Florida Area Developer) met while overseas. Rick and Chris talk about the plan to open a club by the end of the year and then use that as a showcase for other franchise prospects. The article closes with more details about the brand, information on the investment, and how WORKOUT ANYTIME is able to grow in large cities.
        You can also view the full article here.

        DESIGN ROOM HOTEL LE ROYAL MONCEAU

        DESIGN ROOM HOTEL LE ROYAL MONCEAU

        DESIGN ROOM HOTEL LE ROYAL MONCEAU

        Parisian palace since 1928, the hotel Le Royal Monceau offers a revival directed masterfully by Philippe Starck Different! Parisian palace Since 1928, The Hotel Royal Monceau Dining Room Offers revival has masterfully directed by Philippe Starck Different! It is the feeling that one can have by browsing the different areas of the vast Royal Monceau A desire a little crazy and infinitely poetic break with custom, to avoid chokepoints, to welcome the shift, and while cherishing the precision and perfection, displaying a fondness for the panache and daring, fantasy and excess It Is The Feeling That One Can Have by browsing The Different Areas Of The Will to VAST Royal Monceau sample christmas tree decoration and Slightly Crazy With infinitely poetic break custom, to Avoid chokepoints, to Welcome the shift, and while cherishing The precision and perfection, displaying a fondness pour la panache and daring, fantasy and excess.

        37 Avenue Hoche, 08. 37 Avenue Hoche, 08. Champs Elysees, 75008 Paris Champs Elysees, 75008 Paris

        Math Resources for Teachers

        It has been a whirlwind couple of weeks! I went on a mini-vacation to a wedding in Nashville, and then I attended a 3-day workshop on The Role of Mathematics in the International Baccalaureate Primary Years Programme. I think this is the summer of math learning for me! I love attending workshops because I almost always leave with new ideas and new resources to explore. Even if you don’t work at an IB school, there were lots of useful resources worth exploring.

        (Apologies in advance — this will be a long post!)

        Book Resources

        A Mathematical Passage: Strategies for Promoting Inquiry in Grades 4-6

        This book was featured because of it’s Mathematician’s Bill of Rights on p. 139. The Bill of Rights lists the “rights” that all mathematicians have — things like “solve problems in ways that make sense to me” and “capitalize on mistakes as sites of learning.” I’m definitely interested in reading more from this book. I’ve read other things by David J. Whitin before, and they’ve been great.

        Math Matters: Understanding the Math You Teach Grades K-8

        I had a chance to browse this book during the workshop, and it looks like a good one for understanding how to approach math conceptually. May not be the most exciting read in the world (would you look at that front cover?!), but it looks like a very useful book if you’re going for an inquiry oriented math classroom.

        Good Questions for Math Teaching



        This book is great for creating open-ended questions that will really get students thinking about the math involved in problem solving rather than just looking for a specific answer. It uses questioning techniques to develop more sophisticated mathematical thinking, and it has a wealth of information.

        Number Talks

        I was a little surprised how many teachers at the workshop were already familiar with this book and using it given that I’m usually up on all the latest and greatest math books, but nevertheless, this book had rave reviews. Of all the books that I’m reading this summer, this is the one that I suspect will have the biggest impact on my teaching this August. I’ve really enjoyed reading it, and I have so many ideas about how I will put it into practice this year. If you haven’t gotten it already, I couldn’t recommend it more!

        Good Questions: Great Ways to Differentiate Mathematics Instruction



        I know I’ve talked about this book before, but we spent a lot of time talking about open questions and parallel tasks at the workshop, so I had to share this book again. I used this book non-stop at the end of the school year, and I loved how it was so perfectly aligned to Common Core in math. It couldn’t be more teacher-friendly.

        Online Resources

        Visible Thinking Routines

        I’ve been introduced to the Visible Thinking Routines from Harvard’s Project Zero before, but it was good to be reminded about them. These are some great activities to prompt student discussions and thinking. One example of this is “OTQ – Observe, Think, Question.” For this activity, students see a picture and spend a few minutes describing what they see/observe. Anything they observe has to be rooted in the picture and not based on inferences. Step 2 is “Think” – what does this make you think about? This is where students can share their inferences and cite evidence in the picture to support why they think that. Finally, students “question” and share what they wonder about based on the picture. I like that these routines slow down student thinking.
        Math Class Needs a Makeover

        We watched this video in the workshop, and if you’ve never seen it, I highly recommend that you take the 10 minutes to watch Dan Meyer’s TED Talk. In it, he talks about the problems with current approaches to math instruction — largely fueled by larger textbooks and math programs — and how to turn those materials into the types of problems that will challenge your students to become patient problem solvers. I was really inspired by this video, and I hope that you will be, too.

        Have a great weekend! I’ll be back to blogging more regularly next week!



        Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and/or believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

        DYNAMIC DESIGN HOME CINEMA

        DYNAMIC DESIGN HOME CINEMA

        For furniture, I love the few pieces I have and does not change, but as a blogger we discover daily news, it’s hard not to crack …

        Above the living-dining room where Jo Yana chose to paint the main wall in pink – small nod to her favorite designer Karim Rashid … You’ll also notice the suspension ATOMIUM in Kundalini the most beautiful effect!

        This room also houses the home theater installation conducted by Dynamic Home Cinema. In front of these gorgeous wooden drops are pregnant Y21.2 Audio Linear …

        At the entrance, a picture of Miles Aldridge sets the tone of the apartment, and FIDELIO Philips broadcasts Playlist place … On the side of the dining room, chairs LOUIS GHOST EROS and greet guests.

        The main hall lit by the luminaire BLOB M Karim Rashid …

        The cuisine is inspired by Parisian apartment signed Périchon we mention above, because the walls and ceiling were painted in gray have to emphasize the white lacquered furniture. Yellow light under the bar and a nice bin Brabantia bring the strand of color …

        We love the headboard PARROT signed by photographer Solve Sundsbo …

        The workspace of blogger … A reading area with ottoman LEBLON DELIENNE-QUAD and library. An office signed K-DESIGN, and the now famous chair VERTEX signed Karim Rashid.

        DYNAMIC DESIGN HOME CINEMA

        DYNAMIC DESIGN HOME CINEMA

        My Trip to Male, Maldives, September 2010

        The trip to Maldives was a business development trip. Most people just come to Maldives and stay in a resort and go back. I was lucky to see the Maldives by land, sea and air; as well as spending time in Male. I recommend all to see Maldives in all its glory

        View of Water Villas.

        View of Maldives by Air (Sea Plane)

        Not only did I snorkel but I also went on the “Whale Submarine”

        As a sprawling archipelago Maldives (I traveled from Male to the northern most inhabited Island and back to Male) is a breathtaking destination. However, I was shocked to see poverty in the Maldives with a population of just over 300,000. I guess corruption and discrimination is rampant in this tiny nation as well. I must say that Maldives presents a unique problem to any government in having to deliver services to small populations spread across 200 islands (Out of 1192 Islands spread across 90,000 square kilometers)

        I believe the only solution is to embrace ICT and use it to reach every person. However, having said that; the ICT literacy among the Maldivian population is also very low. A real chicken or egg situation for the politicians of Maldives to solve. If ever there was a country which can be considered easy to develop it must be the Maldives.

        Trip to Hyderabad cont…….

        Wow what an assignment! I must say that I have experienced similar assignments in the past in other sectors. However for this sector (development sector) it was a first. As a consultant you have to be on guard all the time when doing an Organization Capacity Assessment (Very similar to a “Due Diligence” in the private sector); if the client wants to mislead you, it can be done quite easily. In my case I was confronted with just that.

        Things that should look out for are:

        1. Uniformity in questioners
        2. Having sets of files pre prepared for you (always ask for random files)
        3. When interviewing staff they have uniform answers or say very similar things (always ask to speak to random sample of staff and triangulate your findings; include speaking to other stakeholders as they will be a be useful source of information)
        4. Taking a long time to locate files and other documents when you request for them
        5. Key staff suddenly taking ill and not being available for interviews
        6. Acting “stupid” or not seem to understand what you are requesting for or saying

        These things must be handled very diplomatically otherwise you will not be able to complete the assignment. Do not have a “knee jerk” reaction, observe very well and collect enough specific examples so that you have a basis for doubting what is presented to you. At the same time you must see if this deception is systematic or simply put up for this occasion.

        If it is systemic you now have a real problem; you will not be able to decipher what is “genuine” and what is “false.” My recommendation is at this point you should seek clarifications from the person who hired you as well as speaking to the decision makers of your client. A temporary halt to the assessment will be in order to do this discretely. Suggest you take prudent steps based on your clients feedback.

        However if you feel it is a put up for this particular assessment then your task is easier and it should be handled with the management of the organization that you are assessing. (Don’t forget you still need to advice your client regarding this unexpected turn of events) As this would be difficult situation for some consultants to handle; I suggest a cautious but a very direct approach. This will reduce the space for excuses by the staff. Since it will come as a surprise to them the staff of the organization you are assessing will also not be able to gang up on you to defend themselves. Make sure that you do not engage in a long dragged out discussion, be short and to the point. If handled properly it should bring about normalcy to the process.

        If however you do not feel comfortable to take a direct approach you must then document both versions of the process i.e.

        1. The results that are shown by the staff of the organization
        2. Your observations and reservation of those results

        This however will not be very useful in the end; as it will not provide the right results to take decisions the assessment was supposed to deliver in the first place. In some rare cases you may need to repeat the assessment to get the right results.

        In my case it was the latter and I did confront the staff and the management regarding it. There was an attempt to defend the position but it was not successful; things returned to an acceptable level of normalcy and I was able to complete the assignment.

        Quick Tip: Medieval II Total War – ‘Fatal Graphics Error’ [Possible Fix]

        I first bought this great game as a DVD Retail Box and then later on purchased it through Direct2Drive [when Direct2Drive was around, then that service became GameFly (2015 Edit: and now it’s D2D again)]. I also have it on Steam as a backup digital download source – it’s too hard to resist those really cheap Steam Sales! Recently, I was Re-Installing M2TW, to begin conquering the world once again… However, I was surprised to see nothing but an error message (on Windows7):

        The “Fatal Graphics Error” message, when starting MTW2

        I personally found this error humorous, as it complained about Graphic Settings – and I couldn’t even start/get into the game to change or even set them in the first place! So, I started Troubleshooting….

        Apparently, a lot of people, on many forums, have been getting and asking about this error – and still are – so here is a great chance to share this Quick Tip on a simple ‘fix’ for it I eventually found, simply by playing with the Shortcut Properties:

        Right-Clicking on the Shortcut for the game and editing the Compatibility Tab to match these settings,
        is how I fixed the Fatal Graphics Error problem when I played M2TW recently. Try it out!
        Click image to see Full Size

        After making these changes to the Shortcut that runs the game (adding two quick checkmarks in the checkboxes shown above), after launching it should show a black screen [detecting settings?] momentarily and then load up the game properly (you may have to click on the icon in the Taskbar [Windows] to bring it up a second time) but that’s it!
        Hopefully that works for you all, as it did for me.

        See You In The Games!

        WORKOUT ANYTIME in the Cincinnati Enquirer Community Press

        WORKOUT ANYTIME in the Cincinnati Enquirer Community Press in an article titled, “Mercy Health’s new hospital could be economic boon to township.” The article focuses on the opening of the Mercy Health – West Hospital in Green Township and how that is creating an opportunity for businesses in the community including the new Cincinnati WORKOUT ANYTIME. The article begins with details about the new hospital, then goes into the economic development going on in the area. The article then details some of the businesses opening in the area, including Tony Petrocelli’s Cincinnati WORKOUT ANYTIME. The article includes this information provided by No Limit Agency: “Cincinnati resident Tony Petrocelli is opening the first Workout Anytime in Ohio near the hospital, in a space that was previously a WesBanco and had been vacant for six years.” The article ends with info on other businesses and plans for development in the area.  Click here for the entire article or begin below.

        Mercy Health’s new hospital could be economic boon to township
        By: Kurt Backschneider

        GREEN TWP. — While township leaders are excited about the state-of-the-art medical services Mercy Health is bringing to the West Side, they’re also looking forward to economic development opportunities the new hospital will help attract.

        Mercy Health – West Hospital, a 250-bed, full-service hospital off of North Bend Road near Interstate 74, will open for business Sunday, Nov. 10. 

        Roughly five years in the making, the $240 million hospital will feature the latest advancements in patient care and comfort, new technologies, private patient rooms and expanded medical services for West Siders.

        (Read More)

        cool little trailer with a hinged top

        https://www.instagram.com/bikergeardotstore/

        First Impressions – Google Play App: “Screen Recorder” by Kimcy929 [App Mini-Review]

        This article has been initially posted as Text-Only at this time, to speed up publishing, focusing on a certain issue. I will return to this posting and add more data on Quality and Performance, Screenshots and then eventually Share it on Twitter/Google+/etc… Soon™

        [This past Christmas, my father gave me a neat little tablet to play on – Thanks, Dad! I have been enjoying the heck out of it, learning what it does (cough how to use a tablet cough), what applications it can run (I can write a Blog Post laying down!) and of course, what games I can play on it, heh. I hope to give some Tutorials/Walkthroughs and Reviews on Games and Apps from it sometime… Oh wait, here’s one now! haha]

        The Google Store page for the app, with the ‘Play’ button removed [I felt it was a bit distracting, making people think there might be a ‘video to play’ here at The Blog], replaced with The Blog’s ‘G’ brevity logo version.
        The Google Play logo in the upper-left will be used to denote images that come ‘directly’ from the Google Play website/page for the app for these types of App Reviews/Posts (Unedited other than logos or helpful arrows/etc added).

        Google Play App – Screen Recorder by Kimcy929

        Straight to it: while this app did in fact ‘record the screen’, it could not record the game sounds themselves (‘internal’ gameplay audio), it only recorded microphone sounds (‘external’ audio outside the device). While this is useful for some, especially Vloggers, I was personally looking for a screen recorder for my tablet that recorded gameplay and the audio from the game, for Tutorials, Walkthroughs, etc.**

        Also, an issue arose where ANY video I viewed after installing this app (even videos I had on my device BEFORE installing it) only came up as a black screen, with the message:

        “…Video Is Playing On External Display…”





        Now, I had not enabled any such option, nor did I connect any External Displays…

        I did some research online and found many people running into this issue with various apps and devices (tablets, phones, etc). Looking at the App configuration in the Settings of my tablet for Screen Recorder, I found this app giving itself the ability to ‘draw over other apps’ (which it can do to create on-screen writing, or arrows, which it advertises that it can do on the Google Play Store page for the app).

        This is fine and these features are no doubt useful; however, I could no longer view any videos with the built-in Video Player (“complete action using > Video”) – I literally could no longer view any videos I had on my device, at all. [Even with third-party Media Players, such as VLC Media Player, simply viewing any videos was now ‘broken’…]

        Video playing of the Video portion of Videos on the Video Player that
        plays Videos was like, really broken now

        Even after disabling this option that it gave itself without prior warning (found in Settings > Apps > ScreenRecorder > DrawOverOtherApps), all videos still came up with just a black screen and that message – that is, just Disabling the Setting did not ‘undo’ the inability to no longer watch videos in the Video Player. Disabling this setting, then Uninstalling this app, then Restarting the Tablet, fixed the issue [in my case, the only way it was fixed].

        While this app does record the screen, allows for microphone use, doesn’t seem to affect gameplay performance very much, and seems to have a decent selection of Resolutions and Bitrates (eg. 1280×720, 8000kbps), also having some additional helpful things like drawing arrows on the screen, etc; it does not record ‘built-in’ gameplay audio – which I personally was looking for** – and it gave itself a power which interfered with normal tablet video viewing afterward… Not only that, but it only recorded a few videos before no longer working, with a message just repeatedly showing up stating, “Unfortunately, Screen Recorder has stopped”.

        No changing of Settings (of my tablet or the app itself) was able to remedy this or get past it [the message coming up and no video being recorded]. Reinstalling the app made it work again, but after a few recordings, only that message repeating on the screen was the result, once again. Therefore, considering all of the above [but including the fact that the app must have worked for other people, that is, those not running into this ‘Screen Recorder has stopped’ message problem], this app earned Three Stars at Google Play from me, as of the time of this writing.

        Being ‘completely free’ (No Fee and No Ads), and having a nice selection of ‘standards’ like Resolution and Bitrate choices, and having ‘extras’ like being able to draw on the screen; perhaps with some improvements to bugfixing, enhancements to how it handles itself (asking/warning what would happen before utilizing the “Draw Over Other Apps” ability would be helpful to users that might run into a problem with it) and adding the ability to record internal gameplay audio**, Screen Recorder could potentially be a very capable and ‘feature-rich’ screen recording application.

        3/5 Stars
        ★★★☆☆


        This app (and a shortened version of the above Review by The Blog (to fit on Google Play’s Review area)) can be found on Google Play, at:

        Screen Recorder by Kimcy929
        https://play.google.com/store/apps/details?id=com.kimcy929.screenrecorder

        [Note: I am not affiliated with Screen Recorder or Kimcy929 in any way, and I have not and will not be compensated by them for writing about them here. I am merely a user of their application and like to help others with helpful information, when I can. The information in this post was obtained on an LG G Pad IV, and therefore might vary slightly from your own experience (Settings, Menus, Performance, Problems, etc) – but I hope that it was still found useful in some way.]